[1] Heinemann R, Hinduja S, Barrow G, et al. Effect of MQL on the tool life of small twist drills in deep-hole drilling[J]. International Journal of Machine Tools & Manufacture, 2006, 46(1):1-6. [2] Tai B L, Stephenson D A, Shih A J. Workpiece temperature during deep-hole drilling of cast iron using high air pressure minimum quantity lubrication[J]. Journal of Manufacturing Science & Engineering, 2013, 135(3):031019. [3] Uekita M, Takaya Y. Tool condition monitoring technique for deep-hole drilling of large components based on chatter identification in time-frequency domain[J]. Measurement, 2017, 103:199-207. [4] Murthy K S, Rajendran I G. Prediction and analysis of multiple quality characteristics in drilling under minimum quantity lubrication[J]. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 2012, 226(6):1061-1070. [5] Gupta K, Ozdoganlar O B, Kapoor S G, et al. Modeling and prediction of hole profile in drilling, part 1: modeling drill dynamics in the presence of drill alignment errors[J]. Journal of Manufacturing Science & Engineering, 2003, 125(1):6-13. [6] Teti R, Jemielniak K, O'Donnell G, et al. Advanced monitoring of machining operations[J]. CIRP Annals-Manufacturing Technology, 2010, 59(2):717-739. [7] Gupta K, Ozdoganlar O B, Kapoor S G, et al. Modeling and prediction of hole profile in drilling, part 2: modeling hole profile[J]. Journal of Manufacturing Science & Engineering, 2003, 125(1): 14-20. [8] Deng C S, Chin J H. Roundness errors in BTA drilling and a model of waviness and lobing caused by resonant forced vibrations of its long drill shaft[J]. Journal of Manufacturing Science & Engineering, 2004, 126(3):524-534. [9] Bayly P V, Lamar M T, Calvert S G. Low-frequency regenerative vibration and the formation of lobed holes in drilling[J]. Journal of Manufacturing Science & Engineering, 2002, 124(2):163-171.
[10] Chin D H, Yoon M C, Sim S B. Roundness modeling in BTA deep hole drilling[J]. Precision Engineering, 2005, 29(2):176-188. [11] 孔令飞, 牛晗, 侯晓丽,等. 错齿内排屑刀具深孔加工中的刀具振动特性对孔圆度形貌的作用机制[J]. 兵工学报, 2016, 37(6):1066-1074. KONG Ling-fei, NIU Han, HOU Xiao-li,et al. Influence of tool vibration characteristics on the hole roundness morphology in BTA deep-hole drilling[J]. Acta Armamentarii, 2016, 37(6):1066-1074. (in Chinese) [12] 孔令飞, 李言, 吕延军. BTA深孔加工钻杆系统的稳定性及分岔[J]. 兵工学报, 2009, 30(12):1684-1690. KONG Ling-fei, LI Yan, LYU Yan-jun. Stability and bifurcation of drilling shaft system in boring and trepanning association deep hole drilling [J]. Acta Armamentarii, 2009, 30(12):1684-1690.(in Chinese) [13] Bovic K, Pierre D, Xavier C. Tool wear monitoring by machine learning techniques and singular spectrum analysis [J]. Mechanical Systems & Signal Processing, 2011, 25(1):400-415. [14] Salgado D R, Alonso F J. An approach based on current and sound signals for in-process tool wear monitoring[J]. International Journal of Machine Tools & Manufacture, 2007, 47(14):2140-2152. [15] Wang H, To S, Chan C Y. Investigation on the influence of tool-tip vibration on surface roughness and its representative measurement in ultra-precision diamond turning[J]. International Journal of Machine Tools & Manufacture, 2013, 69(3): 20-29. [16] Plaza E G, López P J N, Salgado D R, et al. Contribution of surface finish monitoring signals in CNC taper turning[J]. Materials Science Forum, 2014, 797:41-46. [17] Guo Y B, Ammula S C. Real-time acoustic emission monitoring for surface damage in hard machining[J]. International Journal of Machine Tools & Manufacture, 2005, 45(14):1622-1627. [18] Cao H, Lei Y, He Z. Chatter identification in end milling process using wavelet packets and Hilbert-Huang transform[J]. International Journal of Machine Tools & Manufacture, 2013, 69(3): 11-19. [19] Karam S, Teti R. Wavelet transform feature extraction for chip form recognition during carbon steel turning [J]. Procedia CIRP, 2013, 12:97-102. [20] Shi D, Gindy N N. Tool wear predictive model based on least squares support vector machines[J]. Mechanical Systems & Signal Processing, 2007, 21(4):1799-1814. [21] Scheffer C, Heyns P S. An industrial tool wear monitoring system for interrupted turning[J]. Mechanical Systems & Signal Processing, 2004, 18(5):1219-1242. [22] Segreto T, Karam S, Simeone A, et al. Residual stress assessment in Inconel 718 machining through wavelet sensor signal analysis and sensor fusion pattern recognition [J]. Procedia CIRP, 2013, 9:103-108. [23] Hessainia Z, Belbah A, Yallese M A, et al. On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations[J]. Measurement, 2013, 46(5):1671-1681. [24] Upadhyay V, Jain P K, Mehta N K. In-process prediction of surface roughness in turning of Ti-6Al-4V alloy using cutting parameters and vibration signals[J]. Measurement, 2013, 46(1): 154-160. [25] Risbood K A, Dixit U S, Sahasrabudhe A D. Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process[J]. Journal of Materials Processing Technology, 2003, 132(1):203-214. [26] Mei D, Kong T, Shih A J, et al. Magnetorheological fluid-controlled boring bar for chatter suppression[J]. Journal of Materials Processing Technology, 2009, 209(4):1861-1870. [27] Yao Z, Mei D, Chen Z. Chatter suppression by parametric excitation: model and experiments[J]. Journal of Sound & Vibration, 2011, 330(13):2995-3005. [28] Kong L, Chin J H, Li Y, et al. Targeted suppression of vibration in deep hole drilling using magneto-rheological fluid damper[J]. Journal of Materials Processing Technology, 2014, 214(11):2617-2626. [29] Chen F, Lu X, Altintas Y. A novel magnetic actuator design for active damping of machining tools[J]. International Journal of Machine Tools & Manufacture, 2014, 85(7):58-69. [30] Do H T, Zhang X, Nguyen N V, et al. Passive-islanding detection method using the wavelet packet transform in grid-connected photovoltaic systems[J]. IEEE Transactions on Power Electronics, 2016, 31(10):6955-6967. [31] Xiao W, Zi Y, Chen B, et al. A novel approach to machining condition monitoring of deep hole boring[J]. International Journal of Machine Tools & Manufacture, 2014, 77(2):27-33. [32] Ko C N. WSVR-based fuzzy neural network with annealing robust algorithm for system identification[J]. Journal of the Franklin Institute, 2012, 349(5):1758-1780.
第39卷 第2期2018 年2月兵工学报ACTA ARMAMENTARIIVol.39No.2Feb.2018
|