Structural Response of Free-free Beam under Oblique Reverse Ballistic Impact

doi:10.3969/j.issn.1000-1093.2017.11.006

Abstract

Abstract: Reverse ballistic impact test has been widely used to research the materials and structural dynamic response, in which the measuring devices can be installed on the free-free beam to obtain the more accurate measured results. The 20° reverse ballistic oblique impact tests of free-free beam are carried out, and the digital image correlation (DIC) technique is used to measure the real-time dynamic response. The failure criterion is introduced and the simulated results are considered to solve the dynamic responses of free-free beam under axial and transverse impact loading. The results show that the calcula-ted bending shape agrees well with the experimental result, and is better than that in Ref［4］. The reverse ballistics is equivalent to the forward ballistics for the reverse ballistic mass ratio m_γ≥10. The proposed method can also be used for solving the dynamic response of projectile during penetration. Key

Key words: explosionmechanics, free-freebeam, bendingresponse, obliqueimpact, reverseballistics, digitalimagecorrelationmethod

CLC Number:

O385

LIU Jian-cheng, PI Ai-guo, HUANG Feng-lei. Structural Response of Free-free Beam under Oblique Reverse Ballistic Impact[J]. Acta Armamentarii, 2017, 38(11): 2117-2125.

References

［1］ Eakins D, Thadhani N N. Instrumented Taylor anvil-on-rod impact tests for validating applicability of standard strength models to transient deformation states[J]. Journal of Applied Physics, 2006, 100(7): 073503.
[2］刘坚成, 孙宝平, 皮爱国,等. 正反弹道Taylor撞击变形等效性研究[J]. 中国科学:技术科学, 2016, 46(4): 425-435.
LIU Jian-cheng, SUN Bao-ping, PI Ai-guo, et al. The equivalence on structure response of forward and reverse Taylor test[J]. Scientia Sinica Technologica, 2016, 46(4): 425-435.(in Chinese)
[3］ Liu J, Huang F, Xu K, et al. Influence of mass ratio on forward and reverse ballistic impact equivalence: experiments, simulations, and mechanism analysis[J]. Experimental Mechanics, 2017, 57(3): 387-404.
[4］ Reid S, Edmunds A, Johnson W. Bending of long steel and aluminium rods during end impact with a rigid target[J]. Journal of Mechanical Engineering Science, 1981, 23(2): 85-92.
[5］ Jones N, Wierzbicki T. Dynamic plastic failure of a free-free beam[J]. International Journal of Impact Engineering, 1987, 6(3): 225-240.
[6］ Yu T X, Yang J L, Reid S R, et al. Dynamic behaviour of elastic-plastic free-free beams subjected to impulsive loading[J]. International Journal of Solids and Structures, 1996, 33(18): 2659-2680.
[7］ Yang J L, Yu T X, Reid S R. Dynamic behaviour of a rigid, perfectly plastic free-free beam subjected to step-loading at any cross-section along its span[J]. International Journal of Impact Engineering, 1998, 21(3): 165-175.
[8］ Yang J L, Xi F. Dynamic response of an elastic-plastic free-free beam subjected to impact at any cross-section along its span[J]. Key Engineering Materials, 2000, 177/178/179/180:273-278.
[9］ Yang J L, Xi F. Experimental and theoretical study of free-free beam subjected to impact at any cross-section along its span[J]. International Journal of Impact Engineering, 2003, 28(7): 761-781.

[10］席丰, 杨嘉陵, 郑晓宁,等. 自由梁受集中质量横向撞击的刚-塑性动力响应[J]. 爆炸与冲击, 1998, 18(1): 55-62.
XI Feng, YANG Jia-ling, ZHENG Xiao-ning, et al. Dynamic response of a rigid, perfectly plastic free-free beam subjected to impulsive loading[J]. Explosion and Shock Waves, 1998, 18(1): 55-62. (in Chinese)
[11］谢若泽, 张方举, 邓志方,等. 高温、高应变率LY12铝压缩动态力学性能实验[J]. 航空动力学报, 2009, 24(4):799-803.
XIE Ruo-ze, ZHANG Fang-ju, DENG Zhi-fang, et al. Experimental investigation into dynamic compressive mechanical properties of LY12 at high strain rates and high temperatures[J]. Journal of Aerospace Power, 2009, 24(4): 799-803. (in Chinese)
[12］肖大武, 李英雷, 胡时胜. LY12铝小尺寸试样的SHPB实验探讨[J]. 实验力学, 2009, 24(1): 81-85.
XIAO Da-wu, LI Ying-lei, HU Shi-sheng. Experimental study of LY12 Al small dimension specimen based on SHPB test[J]. Journal of Experimental Mechanics, 2009, 24(1): 81-85. (in Chinese)
[13］席丰. 有限变形弹塑性结构的动力响应及碰撞特性研究[D]. 北京: 北京航空航天大学, 1998.
XI Feng. Dynamic response of elastic-plastic finite deformation structure and its impact characteristic research[D]. Beijing: Beihang University, 1998. (in Chinese)
[14］皮爱国, 黄风雷. 大长细比弹体斜侵彻混凝土靶的动力学响应[J]. 爆炸与冲击, 2007, 27(4): 331-338.
PI Ai-guo, HUANG Feng-lei. Dynamic behavior of a slender projectile on oblique penetrating into concrete target[J]. Explosion and Shock Waves, 2007, 27(4): 331-338. (in Chinese)
[15］皮爱国, 黄风雷. 大长细比结构弹体侵彻2024-O铝靶的弹塑性动力响应[J]. 爆炸与冲击, 2008, 28(3): 252-260.
PI Ai-guo, HUANG Feng-lei. Elastic-plastic dynamic response of slender projectiles penetrating into 2024-O aluminum targets[J]. Explosion and Shock Waves, 2008, 28(3): 252-260. (in Chinese)
[16］王一楠, 黄风雷, 段卓平. 小攻角条件下动能弹体高速侵彻混凝土靶的弹体弯曲[J]. 爆炸与冲击, 2010, 30(6): 598-606.
WANG Yi-nan, HUANG Feng-lei, DUAN Zhuo-ping.Bending of projectile with small angle of attack during high-speed penetration of concrete targets[J]. Explosion and Shock Waves, 2010, 30(6): 598-606. (in Chinese)

第38卷第11期2017 年11月兵工学报ACTA
ARMAMENTARIIVol.38No.11Nov. 2017

[1]	LIU Jiancheng, ZHANG Leilei, XU Kun, PI Aiguo, SHI Wenqing, HUANG Fenglei. Structural Response of Projectile in Reverse Ballistic Non-normal Penetrating Experiment [J]. Acta Armamentarii, 2019, 40(9): 1797-1803.
[2]	RAN Chun， CHEN Peng-wan, LI Ling, ZHANG Wang-feng. Experimental Research on Dynamic Mechanical Behavior of TC18 Titanium Alloy under Medium and High Strain Rates [J]. Acta Armamentarii, 2017, 38(9): 1723-1728.
[3]	CHEN Hao-yu, HONG Ren-kai, CHEN Yong-tao, ZHANG Shi-wen, REN Guo-wu, MO Jun-jie. Mini Momentum Probe Technique for Diagnosis of Micro-spall Fracture of Material [J]. Acta Armamentarii, 2017, 38(9): 1729-1735.
[4]	TANG Ting, ZHOU Jian-nan. Study of Anti-blasting Ability of Damaged Underground Arch Structure after Earthquake [J]. Acta Armamentarii, 2017, 38(9): 1736-1744.
[5]	YANG Jun, LI Yan, ZHANG De-zhi, SHI Guo-kai, ZHANG Min, LIU Wen-xiang, WANG Zhao, XIONG Chen. Measuring Technique of Reflected Blast Wave Pressure Based on Pressure Bar and Photonic Doppler Velocimeter [J]. Acta Armamentarii, 2017, 38(7): 1368-1374.
[6]	LIU Jun, TIAN Zhou, ZHONG Wei, XIE Shu-hong. Numerical Investigations on Blast Resistance of Monolithic Tempered Glass Subjected to Shock Wave [J]. Acta Armamentarii, 2017, 38(7): 1402-1408.
[7]	LI Yong， CHENG Yuan-sheng， ZHANG Pan， LIU Jun. Numerical Research on Blast-resistant Performance of Graded Corrugated Sandwich Plates under Air Blast Loading [J]. Acta Armamentarii, 2017, 38(6): 1131-1139.
[8]	ZHAO Tian-hui, GAO Kang-hua, WANG Ming-yang, LI Bin, SUN Song, GUO Qiang. Experimental Study of Pressure Characteristics during Deflagration Venting in a Square Vessel [J]. Acta Armamentarii, 2017, 38(4): 722-727.
[9]	CUI Yun-xiao, CHEN Peng-wan, GUO Bao-qiao, David A. Cendón, ZHOU Zhong-bin. Research on Dynamic Fracture Behavior of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model [J]. Acta Armamentarii, 2017, 38(12): 2379-2385.
[10]	ZHOU Gang-yi， DONG Xin-long， FU Ying-qian. Analysis and Experimental Verification of Dynamic Shear Test for Hat-shaped Specimen [J]. Acta Armamentarii, 2017, 38(12): 2455-2462.
[11]	WU Qiang， ZHANG Qing-ming, LONG Ren-rong, GONG Zi-zheng. Perforation Characteristics of Energetic Material Shield Induced by Hypervelocity Impact of Spherical Projectile [J]. Acta Armamentarii, 2017, 38(11): 2126-2133.