[1] 许泽建, 李玉龙, 刘元庸, 等. 两种高强钢在高加载速率下的II型动态断裂韧性[J]. 金属学报, 2006, 42(6): 635-640. XU Ze-jian, LI Yu-long, LIU Yuan-yong, et al. Mode II dynamic fracture toughness of two high strength steels under high loading rate[J]. Acta Metallurgica Sinica, 2006, 42(6): 635-640. (in Chinese) [2] 苏冠龙, 龚煦, 李玉龙, 等. TC4在动态载荷下的剪切行为研究[J]. 爆炸与冲击, 2015, 35(4): 527-529. SU Guan-long, GONG Xu, LI Yu-long, et al. Shear behavior of TC4 alloy under dynamic loading[J]. Explosion and Shock Waves, 2015, 35(4): 527-529. (in Chinese) [3] 杨新亮, 葛长健, 杨智. 变形温度对TC4合金中温塑性变形行为的影响[J]. 热加工工艺, 2012, 41(16): 71-73,76. YANG Xin-liang, GE Chang-jian, YANG Zhi.The influence of stress state on the development of adiabatic shear for TC4 alloys[J]. Hot Working Technology, 2012, 41(16): 71-73,76. (in Chinese) [4] 张长清, 谢兰生, 陈明和, 等. 高应变率下TC4-DT钛合金的动态力学性能与塑性本构关系[J]. 中国有色金属学报. 2015, 25(2): 323-324. ZHANG Chang-qing, XIE Lan-sheng, CHEN Ming-he, et al. Dynamic mechanical property and plastic constitutive relation of TC4-DT Ti alloy under high strain rate[J] The Chinese Journal of Nonferrous, 2015, 25(2): 323-324. (in Chinese) [5] Timothy S P, Hutchings I M. The structrue of adiabatic shear band in a titanium alloy[J]. Acta Metallurgica, 1985, 33(4): 667-676. [6] Roger H C. Adiabatic plastic deformation[J]. Annual Reciew of Materials Science, 1979, 9(1):283-311. [7] Kalthoff J F, Winkler S. Modes of dynamic shear failure in solids[J].International Journal of Fracture, 2000, 101(1):1-31. [8] 董新龙, 虞吉林, 胡时胜, 等. 高加载率下Ⅱ型裂纹试样的动态应力强度因子及断裂行为[J]. 爆炸与冲击, 1998, 18(1): 62-68. DONG Xin-long, YU Ji-lin, HU Shi-sheng, et al. Stress intensity factor and fracture behavior for mode II crack specimen under high shear loading rate[J].Explosion and Shock Waves,1998, 18(1): 62-68. (in Chinese) [9] 苗润, 范亚夫, 王伟力. 动态II型加载条件下两种金属材料起裂时间判定方法的实验研究[C]∥第十四届战斗部与毁伤技术学术交流会. 重庆: 中国宇航学会无人飞行器分会, 2015: 1080-1081. MIAO Run, FAN Ya-fu, WANG Wei-li. Research on the judgement method of crack time about two metal mertials in dynamic mode II loading condition[C]∥The Fourth Symposium on Warheads and Damcege Technology. Chongqing: Branch of Unmanned Air Vehicles, Chinese Society of Astronautics, 2015: 1080-1081.(in Chinese) [10] Kachanov L M, Rabotnov Y N. Time of the rupture process under creep conditons[J]. Izvestiya Akademii Nauk SSSR Otdelenie Tekniches,1958,8: 26-31. [11] 郝露菡, 丛阳阳, 彭艳. 考虑相变的TC4钛合金流动应力研究[J]. 材料科学与工艺, 2015, 23(5): 12-14. HAO Lu-han, CONG Yang-yang, PENG Yan. Research of flow stress of TC4 titanium considering phase change[J]. Materials Science & Technology, 2015, 23(5): 12-14. (in Chinese) |