Reaction Behaviors of Al/PTFE Materials Enhanced by W Particles

doi:10.3969/j.issn.1000-1093.2016.05.014

Abstract

Abstract: The reaction behaviors of four kinds of Al/W/PTFE materials prepared by compression molding and sintering are studied by split Hopkinson pressure bar (SHPB) and high speed photography. The results show that yield strength and failure strength are improved with the increase in mass fraction of W. The stress-strain curve of the material in quasi-static compression tests can be divided into elastic stage, hardening stage and failure stage. The impact reaction process of Al/W/PTFE material includes deformation, failure and combustion reaction. The calculated results indicate that the strain-rate reaction threshold and unit energy threshold of material increase with the increase in content of W.

Key words: ordnance science and technology, Al/W/PTFE reactive material, split Hopkinson pressure bar, dynamic characteristics, strain-rate reaction threshold

CLC Number:

TJ04

REN Hui-lan, LI Wei, LIU Xiao-jun, CHEN Zhi-you. Reaction Behaviors of Al/PTFE Materials Enhanced by W Particles[J]. Acta Armamentarii, 2016, 37(5): 872-878.

References

［1］宋勇, 潘名伟, 冉秀忠, 等. 活性破片的研究进展及应用前景[C]∥第6届含能材料与钝感弹药技术学术研讨会论文集. 成都：中国工程物理研究院，2014.
SONG Yong, PAN Ming-wei, RAN Xiu-zhong. Research progress and application prospect of active fragment[C]∥6th International Symposium on Energetic and Insensitive Ammunition. Chengdu:China Academy of Engineering Physics, 2014.(in Chinese)
[2］张先锋, 赵晓宁. 多功能含能结构材料研究进展[J]. 含能材料, 2009, 17(6):731-739.
ZHANG Xian-feng, ZHAO Xiao-ning. Review on multifunctional energetic structural materials[J]. Chinese Journal of Energetic Materials, 2009, 17(6):731-739.(in Chinese)
[3］ Hugh E. Reactive fragment:US, 3961576[P]. 1976-06-08.
[4］ Vasant S J, Waldorf M D. Process for making polytetrafluoroethylene-aluminum composite and product made: US, 6547993[P]. 2003-04-15.
[5］ Ames R G, Brennan B P. Measurements of the effect of target skin thickness on the impact-initiated energy release from PTFE-Al projectiles[C]∥2003 Warheads and Ballistics Classified Symposium. Monterey, CA:NDIA, 2003.
[6］ Ames R G, Garrett R K, Brown L. Detonation-like energy release from high-speed impacts of polytetrafluoroethylene-aluminum projectiles[C]∥2002 Warheads and Ballistics Classified Symposium. Monterey, CA:NDIA, 2002.
[7］ Ames R G, Garrett R K. Measurements of the effect of impact-initiated energy release from moderate-density reactive materials[C]∥2003 Warheads and Ballistics Classified Symposium. Monterey, CA:NDIA, 2003.
[8］王树山, 李朝君, 马晓飞. 钨合金破片对屏蔽装药撞击起爆的实验研究[J]. 兵工学报, 2001, 22(2):189-191.
WANG Shu-shan, LI Chao-jun, MA Xiao-fei. An experimental study on the initiation of covered charge impacted by tungsten alloy fragments[J]. Acta Armamentarii, 2001, 22(2):189-191.(in Chinese)
[9］ Xu S L, Yang S Q, Zhang W. The mechanical behaviors of polytetrafluorethylene/Al/W energetic composites[J]. Journal of Physics Condensed Matter, 2009, 21(28):285401-285404.
[10］徐松林, 阳世清, 张炜. PTFE/Al 含能复合物的本构关系[J]. 爆炸与冲击, 2010, 30(4): 439-444.
XU Song-lin, YANG Shi-qing, ZHANG Wei. A constitutive relation for a pressed PTFE/Al energetic composite material[J]. Explosion and Shock Waves, 2010, 30(4):439-444.(in Chinese)
[11］彭飞, 余道强, 阳世清. 含能破片战斗部毁伤效应研究[J].

含能材料, 2011, 19(4): 450-453.
PENG Fei, YU Dao-qiang, YANG Shi-qing. Damage effects of energetic fragment warhead[J]. Chinese Journal of Energetic Materials, 2011, 19(4):450-453.(in Chinese)
[12］王海福, 郑元枫, 余庆波. 活性破片引燃航空煤油实验研究[J]. 兵工学报, 2012, 33(9): 1148-1152.
WANG Hai-fu, ZHENG Yuan-feng, YU Qing-bo. Experimental research on igniting the aviation kerosene by reactive fragment[J]. Acta Armamentarii, 2012, 33(9):1148-1152. (in Chinese)
[13］王海福, 刘宗伟, 俞为民. 活性破片能量输出特性实验研究[J]. 北京理工大学学报, 2009, 29(8):663-666.
WANG Hai-fu, LIU Zong-wei, YU Wei-min. Experimental investigation of energy release characteristics of reactive fragments[J]. Transactions of Beijing Institute of Technology, 2009, 29(8): 663-666.(in Chinese)
[14］ Luo P G, Wang Z C, Jiang C L, et al. Experimental study on impact-initiated characters of W/Zr energetic fragments[J]. Materials & Design, 2015, 84:72-78.
[15］辛春亮, 史文卿, 张雷雷, 等. 活性药型罩聚能装药子弹对钢锭的毁伤效应研究[C]∥第6届含能材料与钝感弹药技术学术研讨会论文集. 成都：中国工程物理研究院，2014.
XIN Chun-liang, SHI Wen-qing, ZHANG Lei-lei, et al. Damage effects of shaped charge comprised of reactive materials liner to the steel target[C]∥6th International Symposium onEnergetic Materials and Insensitive Ammunition. Chengdu:China Academy of Engineering Physics, 2014.(in Chinese)
[16］ Feng B, Fang X, Li Y C, et al. An initiation phenomenon of Al-PTFE under quasi-static compression[J]. Chemical Physics Letters, 2015, 637:38-41.
[17］ Cai J, Walley S M, Hunt R J A, et al. High-strain, high-strain-rate flow and failure in PTFE/Al/W granular composites[J]. Materials Science & Engineering A, 2008, 472(1/2):308-315.
[18］乔良, 涂建, 赵利军. Al/W/PTFE粒径级配关系对材料强度影响的实验研究[J]. 兵器材料科学与工程, 2014， 37(6):17-21.
QIAO Liang，TU Jian，ZHAO Li-jun. Influence of particle size grading on strength of Al/W/PTFE composite[J]. Ordnance Material Science and Engineering, 2014, 37(6):17-21.(in Chinese)
[19］乔良, 张先锋, 何勇. 颗粒金属材料冲击压缩细观数值模拟[J]. 高压物理学报, 2013, 27(6) :863-871.
QIAO Liang, ZHANG Xian-feng, HE Yong. Meso-scale numerical simulation of the shock compression of particle metal materials[J]. Chinese Journal of High Pressure Physics, 2013, 27(6):863-871.(in Chinese)
[20］张宝砰, 张庆明, 黄风雷. 爆轰物理学[M]. 北京:兵器工业出版社, 2001.
ZHANG Bao-ping, ZHANG Qing-ming, HUANG Feng-lei.Detonation physics[M]. Beijing:Publising House of Ordnance Industry, 2011.(in Chinese)

[1]	LIU Qian, ZHANG Zhuxin, ZHAO Dingxuan, WANG Hui, QIN Zhanyong. Electric Landing Assist Device of Shipborne Helicopters and Its Key Characteristics Analysis [J]. Acta Armamentarii, 2024, 45(1): 241-252.
[2]	DU Wanshan, ZHOU Zhou, BAI Yu, ZHANG Zhilin, WANG Keilei. Study on Multibody Dynamics Modeling and Flight Dynamic Characteristics of Combined Aircraft [J]. Acta Armamentarii, 2023, 44(8): 2245-2262.
[3]	GAO Pu, LI Hongcai, LIU Hui, MENG Jieke. Analysis on Dynamic Characteristics of External Oil Pipe System of Integrated Transmission Device in Armoured Vehicle [J]. Acta Armamentarii, 2023, 44(11): 3447-3454.
[4]	MAO Ming, WANG Jian-bing. Research on Influence of Breakwater on Hydrodynamic Characterisitics of Displacement Amphibious Vehicles [J]. Acta Armamentarii, 2016, 37(9): 1553-1560.
[5]	GAO Jun-qiang, TANG Xia-qing, HUANG Xiang-yuan, CHENG Xu-wei. FEA Method for Analysis of SINS Error Caused by Vibration Isolation System [J]. Acta Armamentarii, 2016, 37(9): 1570-1577.
[6]	NI Yan-jie， CHENG Nian-kai, JIN Yong， YANG Chun-xia， LI Hai-yuan， LI Bao-ming. Numerical Simulation on Pressure Wave in a 30mm Electrothermal-chemical Gun [J]. Acta Armamentarii, 2016, 37(9): 1578-1584.
[7]	LU Ye, ZHOU Ke-dong, HE Lei, LI Jun-song, HUANG Xue-ying. Research on Influence of Muzzle Brake Efficiency on a New Large Caliber Machine Gun Based on Floating Principle [J]. Acta Armamentarii, 2016, 37(9): 1585-1591.
[8]	LIU Guo-qing， XU Cheng. The Study of Bullet-Barrel Matching Design Method of High Precision Sniper Rifle [J]. Acta Armamentarii, 2016, 37(9): 1592-1598.
[9]	LI Zhen-xiao， ZHANG Ya-zhou， NI Yan-Jie， LI Bao-ming. Analysis on the Influence of Turn-off Characteristics of Thyristor on Augmented Railgun [J]. Acta Armamentarii, 2016, 37(9): 1599-1605.
[10]	HU Ming, WANG Jiong, WU Xiao-lang. Estimation Method for Storage Life of Magnetorheological Fluid Fuze Arming Device [J]. Acta Armamentarii, 2016, 37(9): 1606-1611.
[11]	ZHOU Peng， CAO Cong-yong， DONG Hao. Analysis of Interior Ballistic Characteristics and Muzzle Flow Field of High-pressure Gas Launcher [J]. Acta Armamentarii, 2016, 37(9): 1612-1616.
[12]	ZHAO Xue-wei， YU Yong-gang， MANG Shan-shan. Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet [J]. Acta Armamentarii, 2016, 37(9): 1617-1623.
[13]	LIN Xiang-yang, LI Han, ZHENG Wen-fang, PAN Ren-ming. Formation Mechanism of Pore Structure of Ball Propellant with Micro-pores Made by Double Emulsion Method [J]. Acta Armamentarii, 2016, 37(9): 1633-1638.
[14]	CUI Yun-xiao, CHEN Peng-wan, David A. Cendón, DAI Kai-da, ZHONG Fang-ping. Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model [J]. Acta Armamentarii, 2016, 37(9): 1639-1645.
[15]	CAO Hao-zhe， WU Yan-xuan， ZHOU Feng， WANG Zheng-jie. Research on Containment Control of Second-order Nonlinear Multi-agent with Collision Avoidance Mechanism [J]. Acta Armamentarii, 2016, 37(9): 1646-1654.