[1] Arjmand A A, Amineh S K, Salimijazi H, et al. Etch assisted ultrasonic floating abrasion process, a new concept for material removal[J]. Microelectronic Engineering, 2014, 129(12):31-37. [2] Kuriachen B, Somashekhar K P, Mathew J. Multiresponse optimization of micro-wire electrical discharge machining process[J]. International Journal of Advanced Manufacturing Technology, 2015, 76(1/2/3/4):91-104. [3] 高霁,刘庆扬,马晓芳,等.电火花磨削加工蜂窝环的热物性参数研究及表面温度场仿真分析[J].兵工学报,2013,34(11):1437-1441. GAO Ji,LIU Qing-yang,MA Xiao-fang,et al. Research on thermal physical parameters and surface temperature field of EDG machining honeycomb ring[J].Acta Armamentarii, 2013,34(11):1437-1441. (in Chinese) [4] Sarkar S, Mitra S, Bhattacharyya B. Parametric analysis and optimization of wire electrical discharge machining of γ-titanium aluminide alloy[J]. Journal of Materials Processing Technology, 2005, 159(3):286-294. [5] Kiyak M, akr O. Examination of machining parameters on surface roughness in EDM of tool steel[J]. Journal of Materials Processing Technology, 2007, 191(1/2/3):141-144. [6] Mahapatra S S, Patnaik A. Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method.[J]. International Journal of Advanced Manufacturing Technology, 2007, 34(9/10):911-925. [7] 李凯,张晋,韩梅. 电火花加工工件表面粗糙度的评定与测试[J].物理测试,2006,24(5):44-45. LI Kai,ZHANG Jin,HAN Mei. Evaluation and determination of roughness of workpiece machined by sparking[J]. Physics Examination and Testing,2006,24(5):44-45. (in Chinese) [8] 张志航,崔海,丁海娟,等.MWEDM 表面三维粗度的小波评定基准面[J].哈尔滨工程大学学报,2011,32(9):1185-1189. ZHANG Zhi-hang,CUI Hai,DING Hai-juan,et al. The reference plane by wavelets for 3D roughness evaluation of micro wire electrical discharge machining (MWEDM) [J]. Journal of Harbin Engineering University, 2011,32(9):1185-1189. (in Chinese) [9] 耿雪松,迟关心,王玉魁,等. 碳化硅颗粒增强铝基复合材料微细电火花线切割加工材料去除率研究[J].兵工学报,2014,35(6): 891-899. GENG Xue-song,CHI Guan-xin,WANG Yu-kui,et al. Research on material removal rate of SiC /Al particulate metal matrix composite by micro-wire electrical discharge machining[J].Acta Armamentarii,2014,35(6):891-899. (in Chinese) [10] Bleys P, Kruth J P, Lauwers B, et al. Surface and sub-surface quality of steel after EDM [J].Advanced Engineering Materials,2006,8(1/2):15-25. [11] Somashekhar K P, Panda S, Mathew J, et al. Numerical simulation of micro-EDM model with multi-spark[J]. International Journal of Advanced Manufacturing Technology, 2013, 76(1/2/3/4):83-90. [12] 秦国华,张运建,叶海潮. 基于神经网络的薄壁件加工变形预测方法[J].兵工学报,2013,34(7):840-845. QIN Guo-hua,ZHANG Yun-jian,YE Hai-chao. A neural network-based prediction method of machining deformation for thin-walled workpiece[J].Acta Armamentarii, 2013,34(7):840-845. (in Chinese) [13] Xu Y, You T, Du C. An integrated micromechanical model and BP neural network for predicting elastic modulus of 3-D multi-phase and multi-layer braided composite[J]. Composite Structures, 2015, 122:308-315. |