绕平头回转体空穴的发展及脱落特性研究

doi:10.3969/j.issn.1000-1093.2014.01.013

兵工学报 ›› 2014, Vol. 35 ›› Issue (1): 88-95.doi: 10.3969/j.issn.1000-1093.2014.01.013

绕平头回转体空穴的发展及脱落特性研究

胡常莉, 王国玉, 陈广豪, 王复峰, 赵静

(北京理工大学机械与车辆学院, 北京 100081)

收稿日期:2013-01-24 修回日期:2013-01-24 上线日期:2014-03-18
作者简介:王国玉（1961—），男，教授，博士生导师
基金资助:
国家自然科学基金项目（51209004、11172040）

Study of Characteristics of Unsteady Cavitating Flow around an Axisymmetric Blunt Body

HU Chang-li, WANG Guo-yu, CHEN Guang-hao, WANG Fu-feng, ZHAO Jing

(School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China)

Received:2013-01-24 Revised:2013-01-24 Online:2014-03-18

摘要/Abstract

摘要： 综合数值计算及实验技术研究了绕平头回转体的空穴发展及脱落特性。采用流动显示技术观察了绕平头回转体的空穴在不同空化数下的发展及脱落历程，并利用局部时均化湍流模型（PANS）进行了数值计算。研究结果表明：绕平头回转体空穴的发展过程和空泡的脱落细节均随空化数的不同而呈现出明显的差异；空化数较大时，空穴发展及脱落没有准周期性，空化数越小，空穴的发展周期越长，脱落空泡的尺度越小；绕平头回转体的空泡准周期性脱落过程主要包括空穴断裂与空泡脱落两个过程；空穴断裂的位置大约位于距回转体肩部0.3D（D为回转体直径）处，由于反向射流的作用使空穴的断裂呈U型涡状；在一定的空化条件下，绕平头回转体的空化由于断裂和融合两个过程的存在，将使空穴在发展过程中呈现更加稳定性的特征。

关键词: 流体力学, 平头回转体, 空穴断裂, 空泡脱落

Abstract: Cavitating flow around an axisymmetric blunt body is studied based on the experiments and numerical simulations. A high-speed video camera is used to observe the processes of cavity development and shedding. A partially-averaged Navier-Stokes (PANS) method which is a hybrid RANS/LES turbulent model is applied in numerical simulation. The results show that the characteristics of cavity developing and shedding vary as cavitation number is changied. With the decrease in the cavitation number, the period of cavity developing increases and the shedding of small scale vortices occurs. Moreover, it is found that the shedding generally contains two processes: cavity break-off and cavity shedding. The cavity break-off probably occurs at the location which is about 0.3D away from the shoulder. The cavity sheds with U-vortex type which is induced by the re-entrant flow. In addition, the cavity tends to be steady when the break-off cavity is in conjunction with the attached cavity.

Key words: fluid mechanics, axisymmetric blunt body, cavity break-off, cavity shedding

中图分类号:

TV131.32

胡常莉, 王国玉, 陈广豪, 王复峰, 赵静. 绕平头回转体空穴的发展及脱落特性研究[J]. 兵工学报, 2014, 35(1): 88-95.

HU Chang-li, WANG Guo-yu, CHEN Guang-hao, WANG Fu-feng, ZHAO Jing. Study of Characteristics of Unsteady Cavitating Flow around an Axisymmetric Blunt Body[J]. Acta Armamentarii, 2014, 35(1): 88-95.

参考文献

［1］权晓波,李岩,魏海鹏，等.大攻角下轴对称航行体空化流动特性试验研究[J].水动力学研究与进展,2008,28(6):662-667.
QUAN Xiao-bo, LI Yan, WEI Hai-peng, et al. An experiment study on cavitation of underwater vehicle’S surface at large angles of attack[J].Chinese Journal of Hydrodynamics, 2008,28(6):662-667.(in Chinese)
[2] Rouse H, McNown J S. Cavitation and pressure distribution, head forms at zero angel of yaw, studies in engineering [R]. Bulletin: State University of Iowa, 1948:32.
[3] May A. Water Entry and the Cavity-Running Behavior of Missiles［R］. Silver Spring: Naval Sea Systems Command Hydroballistics Adcisory Committee,1975.
[4] 刘桦,何友声,赵岗.轴对称空泡流的脉动性态研究[J].上海力学, 1997,18(2): 99-104.
LIU Hua, HE You-sheng, ZHAO Gang. A study on pulsation of axisymmetric cavitation flows[J]. Shanghai Journal of Mechanics, 1997,18(2): 99-104. (in Chinese)
[5] Wu J, Wang G Y, Shyy W. Time-dependent turbulent cavitating flow computations with interfacial transport and filter based models [J]. International Journal for Numerical Methods in Fluids, 2005, 49(7): 739-761.
[6] Coutier-Delgosha O, Reboud J L, Delannoy Y. Numerical simulation of the unsteady behavior of cavitating flows[J]. International Journal for Numerical Methods in Fluids, 2003, 42(5):527-528.
[7] Johansen S T , Wu J , Shyy W. Filter-based unsteady RANS computations [J]. International Journal of Heat and Fluid Flow,2004,25(1):10-21.
[8] 余志毅,王国玉,顾玲燕，等.圆盘空化器超空化绕流流场结构及动力特性的数值分析[J].兵工学报,2008,29(12):1444-1449.
YU Zhi-yi, WANG Guo-yu, GU Ling-yan, et al. Numerical analysis of structure and dynamic characteristics of suppercavitating flow around a disc cavitator[J].Acta Armamentaii, 2008,29(12): 1444-1449. (in Chinese)
[9] Girimaji S, Abdol-Hamid K S. Partially averaged navier stokes model for turbulence: implementation and validation[C]∥The 43rd AIAA Aerospace Sciences Meeting and Exhibit. Reno, Nevada: AIAA, 2005:502.
[10] Frendi A，Tosh A, Girimaji S S. Flow past a backward-facing step:Comparison of PANS, DES and URANS results with experiments［J］. International Journal for Computational Methods in Engineering Science and Mechanics, 2006,8（1）: 23-38.
[11] Kunz R, Boger D, Stinebring D, et al. A preconditioned implicit method for two-phase flows with application to cavitation prediction[J].Comput & Fluids,2000, 29(8):849-875.
[12] Singhal A K, Athavale M M, Li H, et al. Mathematical basis and validation of the full cavitation model[J]. Journal of Fluids Engineering, 2002, 124(3): 617-624.
[13] Kubota A, Kato H, Yamaguchi H. A new modeling of cavitating flows: a numerical study of unsteady cavitation on a hydrofoil section[J]. Journal of Fluid Mechanics, 1992, 240(1):59-96.

[1]	郭庆, 罗凯, 耿少航, 秦侃. 含不凝气体的蒸汽凝结换热数值研究[J]. 兵工学报, 2023, 44(7): 2080-2091.
[2]	贾启明，姜毅，杨莹，赵子熹，王志浩. 新型推力可控垂直发射装置及其内弹道规律[J]. 兵工学报, 2022, 43(7): 1596-1605.
[3]	汪泰霖, 王野, 张富毅, 陈慧岩, 王国玉. 水陆两栖车矢量喷口装置设计与仿真[J]. 兵工学报, 2022, 43(4): 826-850.
[4]	朱毅飞, 林德福, 莫雳, 叶建川. 四旋翼无人机旋翼对机身非定常气动干扰特性[J]. 兵工学报, 2022, 43(2): 410-422.
[5]	刘双, 何广华, 王威, 高云. 附体对分层流中潜艇水动力特性的影响[J]. 兵工学报, 2021, 42(1): 108-117.
[6]	徐路程，郝雪颖，肖凯涛，宋伟伟，陈春生. 爆炸型烟幕弹遮蔽效能仿真研究[J]. 兵工学报, 2020, 41(7): 1299-1306.
[7]	钟阳，王良明，吴映锋. 基于计算流体力学与刚体动力学耦合的高速旋转弹丸弹道计算方法[J]. 兵工学报, 2020, 41(6): 1085-1095.
[8]	权辉，谢建，李良，张力. 火箭发射场坪排焰道口射流研究[J]. 兵工学报, 2020, 41(6): 1111-1122.
[9]	杨龙，胡常莉，罗倩. 不同攻角下绕平头回转体初生空化流动特性研究[J]. 兵工学报, 2020, 41(4): 711-719.
[10]	王利利，刘影，李达钦，吴钦，王国玉. 固体火箭发动机水下超音速射流数值研究[J]. 兵工学报, 2019, 40(6): 1161-1170.
[11]	郑秋亚，苏宁亚，梁益华. 欧拉方程数值求解的高精度通量分裂方法[J]. 兵工学报, 2019, 40(12): 2545-2550.
[12]	赵欣怡，周克栋，赫雷，陆野，李峻松. 某大口径轻武器射流噪声的小波分析与数值模拟[J]. 兵工学报, 2019, 40(11): 2195-2203.
[13]	张曼曼，姜毅，程李东，杨桦，刘琦. 基于嵌套网格的超声速子母弹分离数值分析[J]. 兵工学报, 2019, 40(1): 79-88.
[14]	索文超，许翔，耿飞. 基于计算流体力学的车辆发动机散热器芯部外形优化[J]. 兵工学报, 2017, 38(9): 1839-1844.
[15]	刘涛涛，王国玉，张耐民，黄彪. 绕多孔孔板通气气体与液体两相横射流旋涡特性分析[J]. 兵工学报, 2017, 38(7): 1375-1384.

绕平头回转体空穴的发展及脱落特性研究

Study of Characteristics of Unsteady Cavitating Flow around an Axisymmetric Blunt Body

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价