[1] 赵彦辉, 巴宏波, 郎文昌, 等. 电弧等离子体辅助渗氮处理Cr12MoV钢的组织结构及硬度[J]. 材料热处理学报, 2012, 33(10):151-154. ZHAO Yan-hui, BA Hong-bo, LANG Wen-chang, et al. Microstructure and hardness of Cr12MoV steel treated by arc plasma assisted nitriding process[J]. Transactions of Materials and Heat Treatment, 2012, 33(10):151-154.(in Chinese) [2] Li S H, Xie Y Z, Wu X C. Hardness and toughness investigations of deep cryogenic treated cold work die steel[J]. Cryogenics, 2010, 2(2):89-92. [3] Uslu I, Comert H, Ipek M, et al. A comparison of borides formed on AISI 1040 and AISI P20 steels[J]. Materialsand Amp, 2007, 28(6):1819-1826. [4] 苏振国, 安健, 田旭, 等. 稀土粉末渗硼45钢的磨损与腐蚀性能[J]. 材料热处理学报, 2009, 30(12):183-190. SU Zhen-guo, AN Jian, TIAN Xu, et al.Wear and corrosion properties of 45 steel boronized using Nd2O3 as activator[J]. Transactions of Materials and Heat Treatment, 2009, 30(12): 183-190.(in Chinese) [5] 孔德军, 周朝政. Cr12MoV冷作模具钢TD处理后VC涂层的组织和性能[J]. 中国矿业大学学报, 2011, 40(1):162-166. KONG De-jun, ZHOU Chao-zheng.Structures and properties of VC coating on Cr12MoV cold working die steel by TD process[J]. Journal of China University of Mining & Technology, 2011, 40(1): 162-166.(in Chinese) [6] 姜训勇, 刘智勇, 朱穗东. 渗硼对45钢耐液态金属腐蚀性能影响的研究[J]. 材料热处理学报, 2005, 26(2): 99-102. JIANG Xun-yong, LIU Zhi-yong, ZHU Hui-dong. Research of influence of borinizing treatment on corrosion resistance of 45 steel in molten metal[J]. Transactions of Materials and Heat Treatment, 2005, 26(2):99-102.(in Chinese) [7] 周升, 伍婵娟, 姜佩璐, 等. 渗硼层对SUS304不锈钢耦合变形的摩擦行为的影响[J]. 材料热处理学报, 2010, 31(6): 122-127. ZHOU Sheng, WU Chan-juan, JIANG Pei-lu, et al.Friction behavior of SUS304 stainless steel against boride layer under condition of coupling friction with deformation[J]. Transactions of Materials and Heat Treatment, 2010, 31(6):122-127.(in Chinese) [8] 詹斌, 刘宁, 李彬彬, 等. 渗硼对Ti (C, N)基金属陶瓷组织和性能的影响[J]. 材料热处理学报, 2012, 33(8): 134-139. ZHAN Bin, LIU Ning, LI Bin-bin, et al.Effect of boronizing on microstructure and properties of Ti(C, N)-based cermet[J]. Transactions of Materials and Heat Treatment, 2012, 33(8):134-139. (in Chinese) [9] 王禹, 陈旻, 郜嘉平, 等. Ti-Cr-Si硅化物涂层结构及裂纹扩展[J]. 稀有金属材料与工程, 2000, 29(5): 315-320. WANG Yu, CHEN Min, GAO Jia-ping, et al. Microstructure and crack propagation of Ti-Cr-Si silicide coatings on the niobium alloy C-103[J]. Rare Metal Materials and Engineering, 2000, 29(5):315-320.(in Chinese) [10] 殷磊, 易丹青, 肖来荣, 等. 铌表面MoSi2高温涂层的形貌和结构研究[J]. 稀有金属材料与工程, 2005, 34(1): 91-94. YIN Lei, YI Dan-qing, XIAO Lai-rong, et al.The morphology and structure of MoSi2 high temperature coating on niobium[J]. Rare Metal Materials and Engineering, 2005, 34(1):91-94.(in Chinese) [11] 衣晓红, 樊占国, 张景垒, 等. Ti-6A1-4V钛合金固体渗硼法表面改性[J]. 材料热处理学报, 2010, 31(9): 119-123. YI Xiao-hong, FAN Zhan-guo, ZHANG Jing-lei, et al.Surface modification of Ti-6Al-4V alloy by pack boronizing[J]. Transactions of Materials and Heat Treatment, 2010, 31(9):119-123.(in Chinese) [12] 王宏宇, 赵玉凤, 徐晓静, 等. 热处理对65Mn钢表面渗硼层组织和性能的影响[J]. 材料热处理学报, 2012, 33(12): 142-146 WANG Hong-yu, ZHAO Yu-feng, XU Xiao-jing, et al. Effects of heat treatment on microstructure and properties of boriding layer on 65Mn steel[J]. Transactions of Materials and Heat Treatment, 2012, 33(12):142-146.(in Chinese) [13] 雷明凯, 罗鹏, 高峰, 等. 钢渗硼表面残余应力的数值分析[J]. 金属学报, 2002, 38(1): 47-52. LEI Ming-kai, LUO Peng, GAO Feng, et al. Numerical analysis of residual stress for borided surface on steel[J]. Acta Metallurgica Sinica, 2002, 38(1):47-52.(in Chinese) [14] 赵琳, 张旭东, 陈武柱. 800 MPa级低合金钢焊接热影响区韧性的研究[J]. 金属学报, 2005, 41(4): 392-396. ZHAO Lin, ZHANG Xu-dong, CHEN Wu-zhu.Toughness of heat-affected zone of 800 MPa grade low alloy steel[J]. Acta Metallurgica Sinica, 2005, 41(4):392-396.( in Chinese) |