某火炮上架结构改进设计

doi:10.3969/j.issn.1000-1093.2012.11.001

兵工学报 ›› 2012, Vol. 33 ›› Issue (11): 1281-1285.doi: 10.3969/j.issn.1000-1093.2012.11.001

• 论文 • 下一篇

某火炮上架结构改进设计

孙全兆, 杨国来, 葛建立

(南京理工大学机械工程学院，江苏南京 210094)

收稿日期:2012-03-20 修回日期:2012-03-20 上线日期:2014-01-10
作者简介:孙全兆（1987—），男，博士研究生
基金资助:
国家自然科学基金项目（11172139）；国防“973”计划项目（61311603）

Improved Design for Top Carriage of a Gun

SUN Quan-zhao, YANG Guo-lai, GE Jian-li

(School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China)

Received:2012-03-20 Revised:2012-03-20 Online:2014-01-10

摘要/Abstract

摘要： 为解决某火炮上架刚度较差问题，利用基于传力路径下的结构优化设计方法，进行了上架改进设计。通过有限元静态刚强度计算，分析了原上架设计中的薄弱环节。运用拓扑优化方法找到结构的主传力路径，寻求最佳材料分布，修改了上架筋板布局。采用尺寸优化方法进行详细设计，确定了上架主要板件的厚度尺寸。对改进前后上架结构的刚强度进行了对比和分析，结果表明改进设计的上架刚度有较大幅度提高，最大位移减小了32.7%，左右耳轴室中心变位差减小了52.1%，且最大应力降低20.0%，而结构质量仅增加了1.9 kg，达到了改进设计目标。

关键词: 机械设计, 上架, 拓扑优化, 尺寸优化, 传力路径

Abstract: To improve the stiffness of a gun's top carriage, an modified design was conducted by using the structural optimization based on the path of force transmission. The static stiffness and strength were calculated by using the finite element method, and the weak links in the original design were analyzed. The topology optimization was used to find the main path of force transmission and search for the best material distribution, and then the layout of stiffeners was modified. The detailed design was accomplished by using size optimization, and the thicknesses of major plates were determined. The stiffness and strength of the improved top carriage were enhanced after optimization, the maximal displacement reduced by 32.7%, the center variation of trunnion chamber declined by 52.1%, and the maximal stress decreased by 20.0%, while the mass only increased by 1.9 kg. The results show that the expected goal is achieved.

Key words: mechanical design, top carriage, topology optimization, size optimization, path of force transmission

中图分类号:

TJ303

孙全兆, 杨国来, 葛建立. 某火炮上架结构改进设计[J]. 兵工学报, 2012, 33(11): 1281-1285.

SUN Quan-zhao, YANG Guo-lai, GE Jian-li. Improved Design for Top Carriage of a Gun[J]. Acta Armamentarii, 2012, 33(11): 1281-1285.

参考文献

［1］张相炎，郑建国，杨军荣. 火炮设计理论[M]. 北京：北京理工大学出版社，2005.
ZHANG Xiang-yan, ZHENG Jian-guo, YANG Jun-rong. Artillery design theory[M]. Beijing: Beijing Institute of Technology Press, 2005. (in Chinese)
[2] 李芳，凌道盛. 工程结构优化设计发展综述[J]. 工程设计学报，2002，9(5)：229-235.
LI Fang, LING Dao-sheng. Survey of the developing in engineering structural optimization design[J]. Journal of Engineering Design, 2002, 9(5): 229-235. (in Chinese)
[3] 张海航，于存贵，唐明晶. 某火炮上架结构拓扑优化设计[J]. 弹道学报，2009，21(2)：83-85.
ZHANG Hai-hang, YU Cun-gui, TANG Ming-jing. Topological optimization design for the upper carriage of a gun[J]. Journal of Ballistics, 2009, 21(2): 83-85. (in Chinese)
[4] 韩志强. 某发射装置上架的减重技术研究[D]. 南京：南京理工大学，2006.
HAN Zhi-qiang. Study on weight-reduction techniques for the top carriage of a launcher[D]. Nanjing: Nanjing University of Science and Technology, 2006. (in Chinese)
[5] 葛建立，过斌，杨国来，等. 基于参数优化的炮塔轻量化设计[J]. 火炮发射与控制学报，2011(4)：82-85.
GE Jian-li, GUO Bin, YANG Guo-lai, et al. Lightweight design of the gun turret based on parameter optimization [J]. Journal of Gun Launch & Control, 2011(4): 82-85. (in Chinese)
[6] 邓扬晨，邱克鹏，张卫红，等. 基于传力路径下结构优化设计研究[J]. 机械科学与技术，2003，22(4)：622-626.
DENG Yang-chen, QIU Ke-peng, ZHANG Wei-hong, et al. Structural optimization design based on the path of force transfer[J]. Mechanical Science and Technology, 2003, 22(4): 622-626. (in Chinese)
[7] 张胜兰，郑冬黎，郝琪，等. 基于HyperWorks的结构优化设计技术[M]. 北京：机械工业出版社，2007.
ZHANG Sheng-lan, ZHENG Dong-li, HAO Qi, et al. Structural optimization design techniques based on HyperWorks[M]. Beijing: China Machine Press, 2007. (in Chinese)
[8] 邓扬晨，孙聪，王琦. 飞机设计中的工程优化方法与建模[M]. 吉林：吉林大学出版社，2009.
DENG Yang-chen, SUN Cong, WANG Qi. Engineering optimization methods and modeling in aircraft design[M]. Jilin: Jilin University Press, 2009. (in Chinese)

[1]	牛草, 顾广鑫, 朱磊, 徐宏斌, 李正宇, 张卫红, 陈永伟, 王博, 石建雄, 李一哲. 车载导弹发射架结构有限元分析与拓扑优化设计[J]. 兵工学报, 2023, 44(2): 437-451.
[2]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[3]	温晶晶，吴斌，刘承骛. 导弹整体式翼面骨架结构的拓扑优化设计[J]. 兵工学报, 2017, 38(1): 81-88.
[4]	楼俐，范建华，徐诚. 基于局部稳定性测度的战术移动自组织网络拓扑优化抗干扰技术研究[J]. 兵工学报, 2016, 37(9): 1662-1669.
[5]	何新智, 李德才, 郝瑞参. 屈服应力对磁性液体密封性能的影响[J]. 兵工学报, 2015, 36(1): 175-181.
[6]	黄贤振, 吴茂昌, 张义民, 胡乃涛. 数控刀架转位系统可靠性稳健设计方法研究[J]. 兵工学报, 2013, 34(9): 1132-1136.
[7]	陈兆兵, 王兵, 陈宁, 时魁, 刘长顺. 桅杆型光电探测系统总体精度分析[J]. 兵工学报, 2013, 34(4): 507-512.
[8]	张国庆, 李广伟, 王成焘, 徐滨士. 电弧喷涂修复曲轴多轴疲劳寿命计算[J]. 兵工学报, 2013, 34(3): 324-331.
[9]	王瑞林，张本军，李永建，郝刚. 某型通用机枪大杠杆曲线参数优化研究[J]. 兵工学报, 2012, 33(6): 652-657.
[10]	张建，唐文献，徐省省，彭松江，张攀. 火炮炮闩抽筒子结构优化设计[J]. 兵工学报, 2012, 33(6): 647-651.
[11]	何成铭，吴纬，孟庆均. 基于Copula的机械系统可靠性模型及其应用[J]. 兵工学报, 2012, 33(3): 379-384.
[12]	成凯，张俊，曲振东. 铰接履带车转向及俯仰性能研究[J]. 兵工学报, 2012, 33(2): 134-141.
[13]	李培珍，李志刚. 复合材料定向管力学特性仿真[J]. 兵工学报, 2012, 33(11): 1404-1408.

某火炮上架结构改进设计

Improved Design for Top Carriage of a Gun

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

编辑推荐

Metrics

本文评价