关节齿隙对空间机械臂末端定位精度的影响

doi:10.3969/j.issn.1000-1093.2014.08.025

兵工学报 ›› 2014, Vol. 35 ›› Issue (8): 1301-1307.doi: 10.3969/j.issn.1000-1093.2014.08.025

关节齿隙对空间机械臂末端定位精度的影响

安凯

(山东航天电子技术研究所, 山东烟台 264003)

收稿日期:2013-06-26 修回日期:2013-06-26 上线日期:2014-11-03
作者简介:安凯(1957—)，男，研究员，博士后
基金资助:
国家“973”计划项目（2013CB733000）

Effect of Gear Backlash on Positioning Precision of Manipulator End-effectors

AN Kai

(Shandong Aerospace Electro-technology Institute, Yantai 264003, Shandong, China)

Received:2013-06-26 Revised:2013-06-26 Online:2014-11-03

摘要/Abstract

摘要： 研究齿隙存在情况下机械臂末端定位误差达到要求精度的概率。分析了现有齿隙模型的优点和缺点,对其中的死区模型进行改进,提出齿隙的随机变量模型。将此模型作为3关节机械臂的关节误差,导出机械臂末端定位误差的随机模型,并利用Taylor公式对模型作了近似处理,得到以关节误差的二次函数表示的简化模型，并在关节空间中讨论了末端定位误差的最大值和最小值问题。分4种情形给出定位误差达到要求精度的概率，为多阶段任务系统的路径规划和任务优化提供了依据。

关键词: 航天器结构与设计, 机械臂, 关节, 齿隙, 定位误差

Abstract: The probability of that the positioning error of the end-effectors in a manipulator with gear backlash meets the desired accuracy is studied. The advantages and disadvantages of existing gear backlash models are analyzed, and a random variable model of gear backlash is presented based on the improvement of one of the models. A random model of positioning errors of the manipulator end-effectors is derived by taking the random variable model as angular displacement errors of 3-joint manipulator. A simplified model expressed by a quadratic function of angular displacement errors is obtained by approximating the random model with Taylor's formula. The maximum and minimum of the positioning error in joint space are discussed as well. The probability of that the positioning error of the manipulator end-effectors meets the desired accuracy is presented according to four cases, which provides basis for route planning and task optimization in multi-phase mission system.

Key words: spacecraft structure and design, manipulator, joint, gear backlash, positioning error

中图分类号:

TP241.3

安凯. 关节齿隙对空间机械臂末端定位精度的影响[J]. 兵工学报, 2014, 35(8): 1301-1307.

AN Kai. Effect of Gear Backlash on Positioning Precision of Manipulator End-effectors[J]. Acta Armamentarii, 2014, 35(8): 1301-1307.

参考文献

［1］ Yoshida K．Engineering test satellite VII flight experiments for space robot dynamics and control：theories on laboratory test beds ten years ago，now in orbit[J]．The International Journal of Robotics Research，2003，22(5)：321-335.
［2］ Landzettel K，Preusche C，Albu-schaffer A，et al．Robotic on orbit
servicing-DLR’s experience and perspective[C]∥2006 IEEE/RSJ International Conference on Intelligent Robots and Systems. Beijing，China: IEEE，2006:4587-4594.
［3］ Yoshida K，Dimitrov D， Nakanishi H. On the capture of tumbling satellite by a space robot[C]∥2006 IEEE/RSJ International Conference on Intelligent Robots and Systems. Beijing，China:IEEE，2006:4127-4132.
［4］ Hirzinger G，Landzettel K， Brunner B， et al．DLR’s robotics technologies for on-orbit servicing[J]．Advanced Robodes, 2004, 18(2): 139-174.
［5］ Javier M V，Luis G H．Operational space trajectory tracking control of robot manipulators endowed with a primary controller of synthetic joint velocity[J]. ISA Transactions, 2011, 50(1):131-140.
［6］ Julier S J, Uhlmann J K. Unscented filtering and nonlinear estimarion[J]. Proceedings of the IEEE, 2004, 92(3):401-422.
［7］ Juliet S J. The scaled unscented transformation[C]∥ Proceedings of the American Control Conference. Piscataway, NJ, US:IEEE, 2002:4555-4559.
［8］马艳玲，黄进，张丹. 基于反步自适应控制的伺服系统齿隙补偿[J]. 控制理论与应用, 2008, 25(6):1090-1094.
MA Yan-ling, HUANG Jin, ZHANG Dan. Backlash compensation in servo systems based on adaptive backstepping-control[J]. Control Theory & Applications, 2008, 25(6):1090-1094.(in Chinese)
［9］赵国峰，樊卫华，陈庆伟，等. 齿隙非线性研究进展[J]. 兵工学报, 2006, 27(6):1072-1080.
ZHAO Guo-feng, FAN Wei-hua, CHEN Qing-wei, et al. A survey on backlash nonlinearity[J]. Acta Armamentarii, 2006, 27(6): 1072-1080.(in Chinese)
［10］ Zhou J，Zhang C J，Wen C Y．Robust adaptive output control of uncertain nonlinear plants with unknown backlash nonlinearity[J]. IEEE Transactions on Automatic Control，2007, 52(3):503-509．
［11］谢云, 张立红. 齿隙非线性对闭环直流调速系统的影响[J]. 电气传动, 2010, 40(1):24-26.
XIE Yun, ZHANG Li-hong. Research of backlash nonlinearity on control system of DC speed regulation[J]. Electric Drive, 2010, 40(1):24-26.(in Chinese)
［12］ Nordin M, Gutman P. Controlling mechanical systems with backlash-a survey[J]. Automatica, 2002, 38(10):1633-1649.
［13］ Martin W, Musa J. Backlash compensation in gear trains by means of open-loop modification of the input trajectory[J]. Transactions of the ASME, 2003, 125(9):620-624.
［14］ Tao G, Ma X L, Ling Y. Optimal and nonlinear decoupling control of systems with sandwiched backlash[J]. Automatica, 2001, 37(2):165-176.
［15］ Tornambe A. Modeling andcontrolling one-degree-of-freedom impacts under elastic/plastic deformations[J]. IEEE Proceedings-Control Theory Applications, 1996, 143(5):470-476.
［16］ Kahramn A, Singh R. Interactions between time-varying mesh stiffness and clearance nonlinearities in a geared system[J]. Journal of Sound and Vibration, 1991, 146(1):135-156.
［17］ Kenneth R. Digital image processing[M]. Englewood Cliffs, New Jersey: Prentice-Hall Inc,1998:171-217.

[1]	张天艺, 郑颖, 裘信国, 季行健, 金晓航. 基于特征模型的5阶关节伺服系统扰动补偿策略[J]. 兵工学报, 2024, 45(1): 276-287.
[2]	廖峻北, 伊烁闻, 雷飞, 刘思宇, 郭朝, 王志瑞, 闫曈, 党睿娜. 连续变刚度仿生驱动关节的设计与建模分析[J]. 兵工学报, 2023, 44(11): 3269-3278.
[3]	李辉, 宁峰平, 郭辉, 李瑞琴. 3-PRPS/RRR踝关节康复机器人运动机理研究与试验[J]. 兵工学报, 2023, 44(10): 3026-3037.
[4]	马春生, 尹晓秦, 马振东, 米文博. 下肢外骨骼的膝关节轴线自适应设计与尺度综合[J]. 兵工学报, 2022, 43(3): 653-660.
[5]	严浩, 王洪波, 陈鹏, 张雷雷, 李云贵. 具有广义肩关节的上肢康复机器人优化设计[J]. 兵工学报, 2021, 42(11): 2491-2502.
[6]	桑董辉，陈原，高军. 由2自由度并联髋关节构成的脊柱式四足步行机器人步态规划和稳定性分析[J]. 兵工学报, 2020, 41(6): 1188-1200.
[7]	王茜，侯保林，姚来鹏，文浩. 基于干扰观测器的弹药传输机械臂非线性连续时变反馈控制[J]. 兵工学报, 2020, 41(11): 2179-2188.
[8]	钱前，张爱华，孙艺瑕. 事件驱动多关节机械臂轨迹跟踪自适应鲁棒控制[J]. 兵工学报, 2019, 40(8): 1732-1739.
[9]	孙鹏，李研彪，郭明飞. 一种仿人肩关节的运动学和工作空间分析[J]. 兵工学报, 2019, 40(2): 384-394.
[10]	潘以涛，陈原，王立栋，路浩. 基于弹簧的绳驱动4-SPS/U刚柔并联式躯干关节机构设计与运动学建模[J]. 兵工学报, 2019, 40(11): 2352-2362.
[11]	邱明，周大威，周占生. 基于加速寿命试验的自润滑关节轴承可靠性分析[J]. 兵工学报, 2018, 39(7): 1429-1435.
[12]	王斌锐，靳明涛，沈国阳，金英连，陈迪剑. 气动肌肉肘关节的滑模内环导纳控制设计[J]. 兵工学报, 2018, 39(6): 1233-1238.
[13]	贺云，张飞龙，徐志刚，刘哲. 一种基于风洞试验环境的轨迹捕获系统设计[J]. 兵工学报, 2018, 39(12): 2480-2487.
[14]	邱明，周大威，庞晓旭. 织物衬垫编织工艺对自润滑关节轴承摩擦学性能的影响[J]. 兵工学报, 2017, 38(9): 1867-1872.
[15]	王斌锐，沈国阳，金英连，王凌. 基于干扰观测器的级联气动肌肉肘关节滑模控制[J]. 兵工学报, 2017, 38(4): 793-801.

关节齿隙对空间机械臂末端定位精度的影响

Effect of Gear Backlash on Positioning Precision of Manipulator End-effectors

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价