重型车辆柴油机气缸当量漏气面积检测模型研究

doi:10.3969/j.issn.1000-1093.2018.10.002

摘要/Abstract

摘要： 针对非拆解状态下重型车辆柴油机压缩过程缸内漏气状况难以定量检测的问题，建立柴油机缸套-活塞环漏气过程的双环几何简化模型。通过分析压缩行程中缸内气体的流量与压力变化，推导活塞环当量漏气面积的数学表达式。分析缸套-活塞环热变形对漏气面积的影响，建立缸套-活塞环的当量漏气面积检测模型。利用柴油机保险期试验的拆解检测数据验证模型的准确性。结果表明：当量漏气面积计算结果与柴油机缸套磨损状况一致，与柴油机工况相关性较低，该模型能够较为准确地反映柴油机当前的漏气状况。

关键词: 重型车辆, 柴油机, 漏气检测, 缸套-活塞环, 台架试验

Abstract: A double-ring geometric simplified model of the leakage process of diesel engine cylinder-piston ring is established for quantitatively detecting the leakage condition of diesel engine in the non-dismantling state. The mathematical expression of leakage area of piston ring is deduced by analyzing the flow and pressure changes of the cylinder air during compression stroke. The influence of thermal defor- mation of piston ring on the leakage is analyzed, and an equivalent air leakage area detection model of cylinder- piston ring is established. The results show that the equivalent air leakage area is consistent with the wear condition of diesel engine cylinder liner, the correlation with the working condition of diesel engine is low, and the proposed model can reflect the current leak condition of diesel engine. Key

Key words: heavyvehicle, dieselengine, leakdetection, cylinderliner-pistonring, benchtest

中图分类号:

TK427

杨绍卿, 翟振东, 王宪成，王雪. 重型车辆柴油机气缸当量漏气面积检测模型研究[J]. 兵工学报, 2018, 39(10): 1883-1891.

YANG Shao-qing, ZHAI Zhen-dong, WANG Xian-cheng, WANG Xue. Research on Equivalent Air Leakage Area Detection Model of Heavy Vehicle Diesel Engine[J]. Acta Armamentarii, 2018, 39(10): 1883-1891.

参考文献

［1］邓志明, 欧阳光耀, 李育学, 等.内燃机活塞环组密封性能研究［J］. 润滑与密封, 2011, 36(3):60-64.
DENG Zhi-ming, OUYANG Guang-yao, LI Yu-xue, et al. Research on sealing performance of internal combustion engine piston ring group［J］. Lubrication Engineering, 2011, 36(3):60-64.(in Chinese)
［2］刘卫平, 王明泉. 差压法检测压力气体泄漏的研究［J］. 机械工程与自动化, 2010, 158(1): 133-135.
LIU Wei-ping, WANG Ming-quan. Study on pressure gas leakage detection by differential pressure method［J］. Mechanical Engineering & Automation, 2010, 158(1): 133-135. (in Chinese)
［3］张洪超, 倪计民, 杜倩颖, 等. 车用发动机气缸密封垫的密封性能研究［J］. 内燃机工程, 2011, 32(5):84-92.
ZHANG Hong-chao, NI Ji-min, DU Qian-ying, et al. Research on sealing performance of engine cylinder gasket［J］. Chinese Internal Combustion Engine Engineering, 2011, 32(5):84-92. (in Chinese)
［4］邱宗敏, 金宏卫. 气缸压缩压力的测量在发动机故障诊断中的应用［J］. 装备制造技术, 2012(4):73-74.
QIU Zong-min, JIN Hong-wei. Application of cylinder compression pressure measurement in engine fault diagnosis［J］. Equipment Remanufacturing Technology, 2012(4):73-74. (in Chinese)
［5］ Mao J L, Zuo Z X, Lin W, et al. Multi-dimensional scavenging analysis of a free-piston linear alternator based on numerical simulation［J］. Applied Energy, 2011, 88(4):1140-1152.
［6］归柯庭,汪军，王秋颖. 工程流体力学［M］. 北京: 科学出版社，2003.
GUI Ke-ting, WANG Jun, WANG Qiu-ying. Engineering fluid dynamics［M］. Beijing: Science Press, 2003. (in Chinese)
［7］袁泉. 柴油机性能监测系统的开发与试验研究［D］. 武汉：武汉理工大学, 2005.
YUAN Quan. Development and experimental research on diesel engine performance monitoring system［D］. Wuhan: Wuhan University of Technology, 2005. (in Chinese)
［8］谢静, 白少先. 倾斜椭圆微孔端面上游泵送气体密封流体动压特性［J］. 摩擦学学报, 2017, 37(2):233-239.
XIE Jing, BAI Shao-xian. Effect of flexible sealing ring installation on dynamic followability of dry gas seal［J］. Tribology, 2017, 37(2): 233-239. (in Chinese)
［9］ Meng F M, Wang J X, Xiao K. A study of the influences of particles in the gas flow passage of a piston ring pack on the tribological performances of the piston ring［J］. Journal of Mechanical Engineering Science, 2010, 224(1): 201-215.

［10］ Stedman M, Lindsey K. Limits of surface measurement by stylus instruments［J］. Surface Measurement and Characterization, 1988, 1009(56):56-61.
［11］任晓, 吴承伟, 周平. 粗糙表面的气体密封性能研究［J］. 机械工程学报, 2010, 46(16):176-181.
REN Xiao, WU Cheng-wei, ZHOU Ping. Gas sealing perfor- mance study of rough surface［J］. Journal of Mechanical Engineering, 2010, 46(16):176-181.(in Chinese)
［12］孟祥慧, 谢友柏, 戴旭东. 典型磨损情况下的内燃机性能退化预测［J］. 摩擦学学报, 2009, 29(5): 469-474.
MENG Xiang-hui, XIE You-bai, DAI Xu-dong. Performance degradation prediction of internal combustion engine under typical wear［J］. Tribology, 2009, 29(5): 469-474. (in Chinese)
［13］和穆. 高原坦克动力装置状态监测与寿命预测方法研究［D］. 北京:装甲兵工程学院, 2012.
HE Mu. Research on condition monitoring and life prediction of tank power plant in plateau［D］. Beijing: Academy of Armored Force Engineering, 2012. (in Chinese)
［14］袁晨桓, 冯慧华, 王梦秋, 等. 自由活塞发动机活塞环密封特性研究［J］. 内燃机工程, 2015, 36(5)： 151-156.
YUAN Chen-huan, FENG Hui-hua, WANG Meng-qiu, et al. Research on sealing characteristics of piston ring in free piston engine［J］. Chinese Internal Combustion Engine Engineering, 2015, 36(5)： 151-156. (in Chinese)
［15］ Huang M H, Pan Q, Li Y B, et al. Theoretical investigation of the viscous damping coefficient of hydraulic actuators［J］. Chinese Journal of Mechanical Engineering, 2017, 30(4):829-842.
［16］解茂昭. 内燃机计算燃烧学［M］. 大连: 大连理工大学出版社, 2005.
XIE Mao-zhao. Combustion calculation internal combustion engine［M］. Dalian: Dalian University of Technology Press, 2005. (in Chinese)
［17］毕玉华. 柴油机缸套力学特性及变形研究［D］. 昆明:昆明理工大学, 2011.
BI Yu-hua. Study on mechanical characteristics and deformation of diesel cylinder liner［D］. Kunming: Kunming University of Science and Technology, 2011. (in Chinese)

第39卷
第10期2018 年10月兵工学报ACTA
ARMAMENTARIIVol.39No.10Oct.2018

[1]	商显赫, 张付军, 吕航, 刘涛, 韩雪峰, 王密琪. 提升重型车辆起步性能协调控制策略[J]. 兵工学报, 2024, 45(1): 264-275.
[2]	李子铭, 刘振明, 刘景斌, 陈萍. 舰船柴油机微通道内燃油空化现象的模型对比[J]. 兵工学报, 2023, 44(10): 3091-3100.
[3]	黎一锴，彭靖，史中杰，檀丽宏，李耀宗. 具有环境适应性的柴油机最小压缩比设计方法[J]. 兵工学报, 2022, 43(8): 1744-1752.
[4]	郭圣刚，王建平，赵忠诚，程晶晶，田新伟. 金属掺杂对高强化柴油机活塞销类金刚石薄膜涂层摩擦学性能的影响[J]. 兵工学报, 2021, 42(4): 715-722.
[5]	于飞，刘波澜，颜超，韩耀辉，王文泰. 柴油机电动可变气门正时机构特性[J]. 兵工学报, 2021, 42(3): 468-477.
[6]	王玮琪，王伟达，孙晓霞，张渊博，刘城，项昌乐. 重型车辆多挡并联混合动力系统的联合优化控制策略[J]. 兵工学报, 2021, 42(10): 2242-2250.
[7]	顾程，乔新勇，韩立军. 不同燃油对某重型柴油机燃烧稳定性影响分析[J]. 兵工学报, 2020, 41(3): 426-433.
[8]	强永平，李海鹰，张晓琴，蔡忠周，朱伟青，李玉峰，龚永星. 柴油机回水温度对燃烧过程影响试验研究[J]. 兵工学报, 2020, 41(2): 222-230.
[9]	赵建华，应宇辰，郭成豹. 柴油机磁场的计算、试验与消磁优化[J]. 兵工学报, 2020, 41(2): 350-355.
[10]	李佳蔚，崔涛，刘宇航，师帅楠，孙强. 基于排气温度动态模型的在线观测器研究[J]. 兵工学报, 2019, 40(8): 1562-1571.
[11]	王子玉，张岩，王雷，刘金龙，白洪林，李玉峰. 进气门晚关米勒循环对高强化柴油机燃烧和换气影响的研究[J]. 兵工学报, 2019, 40(1): 8-17.
[12]	王旭东，熊春华，鲁长波，安高军，王锋. 高原环境下柴油机燃用聚醚型含氧燃料热平衡试验研究[J]. 兵工学报, 2018, 39(8): 1473-1478.
[13]	刘永丰，王龙飞，刘胜，尹玉婷，杨震寰. 海拔高度对柴油机缸内热流分布影响规律研究[J]. 兵工学报, 2018, 39(6): 1049-1057.
[14]	刘宇航，张付军，高宏力，王苏飞. 对置活塞二冲程柴油机新鲜充量短路研究[J]. 兵工学报, 2018, 39(6): 1058-1065.
[15]	刘宇航，张付军，慕连好，高宏力，王苏飞. 对置活塞二冲程柴油机换气子阶段完成比例研究[J]. 兵工学报, 2018, 39(3): 428-435.