重载越野车辆高原起步响应性研究

doi:10.3969/j.issn.1000-1093.2016.10.019

兵工学报 ›› 2016, Vol. 37 ›› Issue (10): 1915-1925.doi: 10.3969/j.issn.1000-1093.2016.10.019

重载越野车辆高原起步响应性研究

黄绵敦，张付军，崔涛，刘雪媛

（北京理工大学机械与车辆学院，北京 100081）

收稿日期:2016-02-02 修回日期:2016-02-02 上线日期:2016-12-08
通讯作者: 黄绵敦 E-mail:huangmd1111@126.com
作者简介:黄绵敦（1992—），男，硕士研究生
基金资助:
国家部委科研基金项目（B2220110005）

Research on the Starting Response of Heavy-duty Off-road Vehicle on Plateau

HUANG Mian-dun, ZHANG Fu-jun, CUI Tao, LIU Xue-yuan

(School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081,China)

Received:2016-02-02 Revised:2016-02-02 Online:2016-12-08
Contact: HUANG Mian-dun E-mail:huangmd1111@126.com

摘要/Abstract

摘要： 针对重载越野车辆在高原环境下起步响应性差的问题，借助汽车仿真分析GT-SUITE软件建立整车模型，仿真研究了海拔因素对重载越野车辆起步过程的影响以及换挡时刻、前传动比对高原环境下起步过程的影响。结果表明：平原环境下整车起步用时14.7 s，而海拔高度4 500 m环境下用时27.2 s；相比于1 000 r/min转速换挡而言，2 000 r/min转速换挡所对应的整车起步响应时间缩短了3.9 s，因此可以通过提高起步换挡时刻对应发动机转速的方法来改善车辆的起步响应性；随着前传动比的增大，整车起步过程中的加速度增大，但是达到稳定状态时的车速减小，因此可以通过合理选择前传动比的方式来改善车辆的起步响应性。受到空燃比限制的影响，使得起步过程发动机与液力变矩器的共同输入特性与4 500 m海拔下外特性所对应的共同输入特性差别较大。

关键词: 动力机械工程, 高原, 起步过程, 重载越野车辆, 转速响应性, 前传动比

Abstract: To study the starting response of heavy-duty off-road vehicle on plateau, a full vehicle model is established using GT-SUITE. The effects of altitude, gear shifting moment of and front gear ratio on the starting-up process of heavy-duty off-road vehicle are studied through simulation. The research results show that the starting process of vehicle takes 14.7 s on plain, while it takes 27.2 s at the altitude of 4 500 m; in comparison with the gear shifting at 1 000 r/min, the response time of starting is decreased by 3.9 s at 2 000 r/min. Therefore, the vehicle starting response can be improved by shifting gear at high engine speed. With the increase in front gear ratio, acceleration increases during starting, but the vehicle speed decreases at steady state. Therefore, the starting response of vehicle can be improved by choosing an apposite front gear ratio. Due to the influence of air-fuel ratio limit, the common input characteristics of hydraulic torque converter and engine during starting are different from the common input characteristics of hydraulic torque converter corresponding to engine full load characteristics at the altitude of 4 500 m.

Key words: power machinery engineering, plateau, starting process, heavy-duty off-road vehicle, engine speed response, front gear ratio

中图分类号:

TK421

黄绵敦，张付军，崔涛，刘雪媛. 重载越野车辆高原起步响应性研究[J]. 兵工学报, 2016, 37(10): 1915-1925.

HUANG Mian-dun, ZHANG Fu-jun, CUI Tao, LIU Xue-yuan. Research on the Starting Response of Heavy-duty Off-road Vehicle on Plateau[J]. Acta Armamentarii, 2016, 37(10): 1915-1925.

参考文献

［1］毕小平, 韩树, 马志雄, 等. 履带车辆加速性能和燃油消耗量的仿真模型［J］. 内燃机工程, 2002, 23(3):1-4.
BI Xiao-ping, HAN Shu, MA Zhi-xiong, et al. A simulation model of acceleration performance and fuel consumption for tracked vehicles［J］. Chinese Internal Combustion Engine Engineering, 2002, 23(3):1-4.(in Chinese)
［2］刘瑞林. 柴油机高原环境适应性研究［M］. 北京:北京理工大学出版社, 2012.
LIU Rui-lin. Research on plateau adaptability of diesel engine［M］. Beijing:Beijing Institute of Technology Press, 2012.(in Chinese)
［3］肖殿东,孙文军,邱辉鹏. 一种针对起步能力的整车匹配计算方法［J］. 机械研究与应用, 2011(5):117-118.
XIAO Dian-dong, SUN Wen-jun, QIU Hui-peng. An algorithm on automobile transmission launch quality matching［J］. Mechanical Research & Application, 2011(5):117-118.(in Chinese)
［4］邹永显, 徐保荣, 王伟, 等. 车辆高海拔环境起步性能试验研究［J］. 计算机测量与控制, 2015, 23(7):2443-2446.
ZOU Yong-xian, XU Bao-rong, WANG Wei, et al. Experimental study on staring performance of vehicles in high altitude environment［J］. Computer Measurement & Control, 2015, 23(7):2443-2446. (in Chinese)
［5］许宏昌, 洪万年. 针对高原环境下车辆起步困难问题的研究［J］. 车辆与动力技术, 2015(1):24-26.
XU Hong-chang, HONG Wan-nian. Study on the problem of vehicle starting difficulty in plateau environment［J］. Vehicle & Power Technology, 2015(1):24-26.(in Chinese)
［6］ Serrano J R, Arnau F J, Dolz V, et al. Methodology for characterization and simulation of turbocharged diesel engines combustion during transient operation. Part 1:data acquisition and post-processing［J］. Applied Thermal Engineering,2009, 29(1):142-149.
［7］朱振夏, 张付军, 吴滔滔, 等. 基于神经网络的零维预测燃烧模型及建模方法［J］. 内燃机学报, 2015, 33(2):163-170.
ZHU Zhen-xia, ZHANG Fu-jun, WU Tao-tao, et al. Zero-D predictable combustion model based on neural network and modeling［J］. Transactions of CSICE, 2015, 33(2):163-170.(in Chinese)
［8］杨殿勇, 王忠, 历宝录, 等. VNT增压柴油机与整车速度瞬态响应的试验分析［J］. 车用发动机, 2005(5):44-47.
YANG Dian-yong, WANG Zhong, LI Bao-lu, et al. Analysis of the velocity transient response of VNT in turbocharged diesel & vehicle［J］. Vehicle Engine, 2005(5):44-47.(in Chinese)

[1]	孟光磊，李树发，刘彬斌，周铭哲，孙东来，吴昊. 防空预警雷达高原环境适应性评估的自学习模糊灰度方法[J]. 兵工学报, 2022, 43(1): 98-110.
[2]	王旭东，熊春华，鲁长波，安高军，王锋. 高原环境下柴油机燃用聚醚型含氧燃料热平衡试验研究[J]. 兵工学报, 2018, 39(8): 1473-1478.
[3]	刘永丰，王龙飞，刘胜，尹玉婷，杨震寰. 海拔高度对柴油机缸内热流分布影响规律研究[J]. 兵工学报, 2018, 39(6): 1049-1057.
[4]	谭丕强，王德源，王成官，李远，楼狄明，李云广，刘胜，杨振寰. 高原环境下重型柴油机的性能优化研究[J]. 兵工学报, 2018, 39(3): 436-443.
[5]	索文超，许翔，耿飞. 基于计算流体力学的车辆发动机散热器芯部外形优化[J]. 兵工学报, 2017, 38(9): 1839-1844.
[6]	王英敏，崔涛，张付军，董天普. 基于局部线性模型树模型的柴油机进气系统漏气和堵塞故障诊断[J]. 兵工学报, 2017, 38(8): 1457-1468.
[7]	叶莹，赵振峰，符代桥, 张付军. 对置活塞轴向发动机同步运动机构空间圆柱凸轮的设计与优化[J]. 兵工学报, 2017, 38(5): 852-858.
[8]	岳广照，刘兴华，仇滔. 柴油机选择性催化还原系统氨泄漏及控制研究[J]. 兵工学报, 2017, 38(4): 634-642.
[9]	王增全，王正，兰银在，陈泽忠，侯新荣. 某型车用柴油机机体缝合螺栓的可靠性增长研究[J]. 兵工学报, 2017, 38(3): 433-439.
[10]	王宪成，赵文柱，和穆，杨绍卿，徐冬冬. 柴油机喷油器喷孔积碳对喷雾影响研究[J]. 兵工学报, 2017, 38(2): 218-226.
[11]	马宁，李若亭，赵文柱，杨绍卿，徐冬冬，孙志新. 高原环境条件下的柴油机起动过程试验研究[J]. 兵工学报, 2017, 38(2): 227-232.
[12]	刘胜吉，赵宇超，刘荣利，王建，孙永福. 基于排放特性的小型风冷柴油机燃烧过程研究[J]. 兵工学报, 2017, 38(12): 2480-2487.
[13]	刘宇航，赵振峰，张付军，谢钊毅, 鲁怡，崔华盛. 对置活塞二冲程柴油机双喷油器碰撞喷雾试验研究[J]. 兵工学报, 2017, 38(10): 1881-1890.
[14]	仇滔，刘天翔，安晓东，雷艳，代贺飞. 高压共轨喷油器针阀开启与关闭过程规律研究[J]. 兵工学报, 2017, 38(10): 2069-2074.
[15]	商海昆，董长龙，何剑丰，樊丰，李萍，黄绵敦，谢亮. 二级增压柴油机压缩比和喷油提前角优化研究[J]. 兵工学报, 2017, 38(1): 20-26.

重载越野车辆高原起步响应性研究

Research on the Starting Response of Heavy-duty Off-road Vehicle on Plateau

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价