某型车用柴油机机体缝合螺栓的可靠性增长研究

doi:10.3969/j.issn.1000-1093.2017.03.003

兵工学报 ›› 2017, Vol. 38 ›› Issue (3): 433-439.doi: 10.3969/j.issn.1000-1093.2017.03.003

某型车用柴油机机体缝合螺栓的可靠性增长研究

王增全，王正，兰银在，陈泽忠，侯新荣

（中国北方发动机研究所, 天津 300400）

收稿日期:2016-05-19 修回日期:2016-05-19 上线日期:2017-04-24
作者简介:王增全(1962—), 男, 研究员。E-mail: zengquanwang2005@163.com
基金资助:
国家部委型号工程项目(2014年）

Research on the Reliability Growth of Closed Blots for Automobile Diesel Engine Body

WANG Zeng-quan, WANG Zheng, LAN Yin-zai, CHEN Ze-zhong, HOU Xin-rong

(China North Engine Research Institute, Tianjin 300400, China)

Received:2016-05-19 Revised:2016-05-19 Online:2017-04-24

摘要/Abstract

摘要： 针对某型车用柴油机机体缝合螺栓存在的断裂问题，研究机体缝合螺栓的失效模式及其失效机理，设计机体缝合螺栓模拟试验装置，进行机体缝合螺栓振动试验，实现机体缝合螺栓断裂失效的复现。在此基础上，研究机体缝合螺栓的可靠性增长措施及其有效性，将改进后的机体缝合螺栓安装在柴油机上进行应用验证。研究结果表明：机体缝合螺栓的失效模式为疲劳断裂，机体缝合螺栓在工作时发生共振是导致其断裂的原因；机体缝合螺栓采取可靠性增长措施后在安装状态下的固有频率得到显著提高，能够有效避免因共振引发的断裂失效。

关键词: 动力机械工程, 车用柴油机, 机体缝合螺栓, 振动疲劳, 可靠性增长, 失效机理

Abstract: For the reliability of closed blots for automobile diesel engine body, the failure mode and its failure mechanism of closed blot is studied. A test equipment of closed blots is designed. The vibration experiment is done for closed blot for diesel engine body, and the fault recovery of closed blot with the fatigue mode is completed. The measures for improving the reliability of closed blots are studied. The improved closed blot is assembled on the diesel engine body, and its reliability is validated through application. The result shows that the failure mode of closed blot for diesel engine body is a vibration fatigue, and the resonance is the reason for the failure of closed blot. After the measures for improving the reliability are adopted, the vibration frequency of closed blot is improved obviously, and it can avoid the resonance effectively. Key

Key words: powermachineryengineering, automobiledieselengine, closedblot, vibrationfatigue, reliabilitygrowth, failuremechanism

中图分类号:

TK422

王增全，王正，兰银在，陈泽忠，侯新荣. 某型车用柴油机机体缝合螺栓的可靠性增长研究[J]. 兵工学报, 2017, 38(3): 433-439.

WANG Zeng-quan, WANG Zheng, LAN Yin-zai, CHEN Ze-zhong, HOU Xin-rong. Research on the Reliability Growth of Closed Blots for Automobile Diesel Engine Body[J]. Acta Armamentarii, 2017, 38(3): 433-439.

参考文献

［1］章伊华, 林丹益, YANG Guo-yu. 基于接触理论的螺栓联接接触面力学特性研究［J］. 兵工学报, 2015, 36(5): 946-952.
ZHANG Yi-hua, HOU Pei-hai, YANG Guo-yu. Research on mechanical properties of contact surfaces in bolt joints ［J］. Acta Armamentarii, 2015, 36(5):946-952.(in Chinese)
［2］ Marshall M B, Lewis R, Dwyer-Joyce R S. Characterization of contact pressure distribution in bolted joints［J］. Strain, 2006, 42(1): 31-43.
［3］祖炳锋, 付光琦, 徐玉梁, 等. 车用柴油机缸孔在缸盖螺栓预紧力下变形的数值模拟与试验研究［J］. 内燃机工程, 2010, 31(2):98-104.
ZU Bing-feng, FU Guang-qi, XU Yu-liang, et al. Numerical simulation and experimental investigation on cylinder bore deformation of automotive diesel engines under cylinder-head bolt pre-tightened［J］. Chinese Internal Combustion Engine Engineering, 2010, 31(2): 98-104.(in Chinese)
［4］杜洪奎, 袁昌明. 螺栓疲劳寿命预测［J］. 机械设计, 2008, 25(2):10-12.
DU Hong-kui, YUAN Chang-ming. Prediction on the fatigue life-span of bolts［J］. Journal of Machine Design, 2008, 25(2):10-12.(in Chinese)
［5］闫亚杰, 雷宏刚, 焦晋峰, 等. 螺栓球节点网架结构中高强度螺栓常幅疲劳计算方法的建立［J］. 建筑结构学报, 2010, 31(增刊1):92-97.
YAN Ya-jie, LEI Hong-gang, JIAO Jin-feng, et al. Constant amplitude fatigue calculation method of high strength bolts in grid structures with bolt sphere joints［J］. Journal of Building Structures, 2010, 31(S1):92-97.(in Chinese)
［6］周芬, 欧阳卿, 杜运兴, 等. 螺栓球网架节点高强螺栓的疲劳性能研究［J］. 湖南大学学报:自然科学版, 2014, 41(11):32-36.
ZHOU Fen, OUYANG Qing, DU Yun-xing, et al. Fatigue study on high strength bolts in bolted sphere joints of grid structure［J］. Journal of Hunan University:Natural Sciences, 2014, 41(11):32-36. (in Chinese)
［7］ Saeed M, Majeed S, Hassan K. Reliability analysis of fatigue crack initiation of railhead in bolted rail joint［J］. Engineering Failure Analysis, 2013, 29(1):132-148.
［8］ Lin S R, Wu W F. Estimation of maximum axial force of anchor bolts in consideration of random bolt failures［J］. International Journal of Pressure Vessels and Piping, 2015, 131:52-59.
［9］ Huda F, Kajiwara I, Hosoya N, et al. Bolt loosening analysis and diagnosis by non-contact laser excitation vibration tests［J］. Mechanical Systems and Signal Processing, 2013, 40(2):589-604.

［10］徐鸿, 郑善合, MAILE Karl．超(超)临界汽轮机汽缸紧固螺栓疲劳-蠕变断裂的研究［J］. 中国电机工程学报, 2007, 27(32): 63-66.
XU Hong, ZHENG Shan-he, MAILE Karl. Research on the fatigue-creep rupture of fastening bolts of ultra-supercritical steam turbine cylinder case ［J］．Proceedings of the CSEE, 2007, 27(32): 63-66.(in Chinese)
［11］郭文芳, 冯继军, 彭贤锋, 等. 某发动机胀断连杆螺栓松脱失效分析［J］. 理化检验：物理分册, 2016, 52(4): 274-277.
GUO Wen-fang, FENG Ji-jun, PENG Xian-feng, et al. Failure analysis on looseness of fractured connecting rod bolt of an engine［J］. Physical Testing and Chemical Analysis Part A:Physical Testing, 2016, 52(4):274-277.(in Chinese)
［12］ Benedetti M D, Garofalo G, Zumpano M, et al. On the damping effect due to bolted junctions in space structures subjected to pyro-shock［J］. Acta Astronautica, 2007, 60(12): 947-956.

第38卷
第3期2017 年3月兵工学报ACTA
ARMAMENTARIIVol.38No.3Mar.2017

[1]	田彤辉，袁杰红，王青文，关振群，陈柏生. 异常荷载下导弹（火箭）级间连接结构失效分析[J]. 兵工学报, 2020, 41(2): 388-397.
[2]	李大伟，阮旻智，尤焜. 基于可靠性增长的武器系统可靠性鉴定试验方案研究[J]. 兵工学报, 2017, 38(9): 1815-1821.
[3]	索文超，许翔，耿飞. 基于计算流体力学的车辆发动机散热器芯部外形优化[J]. 兵工学报, 2017, 38(9): 1839-1844.
[4]	王英敏，崔涛，张付军，董天普. 基于局部线性模型树模型的柴油机进气系统漏气和堵塞故障诊断[J]. 兵工学报, 2017, 38(8): 1457-1468.
[5]	叶莹，赵振峰，符代桥, 张付军. 对置活塞轴向发动机同步运动机构空间圆柱凸轮的设计与优化[J]. 兵工学报, 2017, 38(5): 852-858.
[6]	岳广照，刘兴华，仇滔. 柴油机选择性催化还原系统氨泄漏及控制研究[J]. 兵工学报, 2017, 38(4): 634-642.
[7]	王宪成，赵文柱，和穆，杨绍卿，徐冬冬. 柴油机喷油器喷孔积碳对喷雾影响研究[J]. 兵工学报, 2017, 38(2): 218-226.
[8]	刘胜吉，赵宇超，刘荣利，王建，孙永福. 基于排放特性的小型风冷柴油机燃烧过程研究[J]. 兵工学报, 2017, 38(12): 2480-2487.
[9]	刘宇航，赵振峰，张付军，谢钊毅, 鲁怡，崔华盛. 对置活塞二冲程柴油机双喷油器碰撞喷雾试验研究[J]. 兵工学报, 2017, 38(10): 1881-1890.
[10]	仇滔，刘天翔，安晓东，雷艳，代贺飞. 高压共轨喷油器针阀开启与关闭过程规律研究[J]. 兵工学报, 2017, 38(10): 2069-2074.
[11]	商海昆，董长龙，何剑丰，樊丰，李萍，黄绵敦，谢亮. 二级增压柴油机压缩比和喷油提前角优化研究[J]. 兵工学报, 2017, 38(1): 20-26.
[12]	骆燕燕, 刘旭阳，郝杰，王振, 刘磊，林小明. 航空电连接器热疲劳失效机理研究[J]. 兵工学报, 2016, 37(7): 1266-1274.
[13]	张栓录，赵长禄，钟科，赵振峰. 液压自由活塞柴油机的做功影响因素分析[J]. 兵工学报, 2016, 37(3): 394-399.
[14]	穆洪斌，魏巍，闫清东，刘城. 双循环圆液力缓速器叶片顶弧优化设计[J]. 兵工学报, 2016, 37(3): 400-407.
[15]	纪常伟，冯雨，汪硕峰，张擘，徐溥言，余梦辉. 添加剂对车载制氢机制氢效率影响的实验研究[J]. 兵工学报, 2016, 37(3): 570-576.

某型车用柴油机机体缝合螺栓的可靠性增长研究

Research on the Reliability Growth of Closed Blots for Automobile Diesel Engine Body

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价