[1] |
HONG S W,TONG V C.Rolling-element bearing modeling:a review[J].International Journal of Precision Engineering and Manufacturing,2016,17(12):1729-1749.[2] 徐锐,沈献绍,范强,等.航空发动机主轴球轴承失效分析[J].轴承,2012(6):20-24.XU R,SHEN X S,FAN Q,et al. Failure analysis on engine aero-spindle ball bearing[J].Bearings,2012(6):20-24. (in Chinese)[3] ELLIS E E. Misaligned ball bearings[J].Tribology,1970,3(1):29-38.[4] HINTON W R. An investigation into the causes of ball bearing failures in types P2 and P3 engine-driven generators[J].Wear,1970,16(1/2):3-42.[5] HINTON W R. A theoretical study of the effect of angular misalignment on ball bearing cage life[J].Wear,1970,16(3):175-187.[6] CRAWFORD T S.The experimental determination of ball bearing cage stress[J].Wear,1970,16(1):43-52.[7] ERTAS B H,VANCE J M.Effect of static and dynamic misalignment on ball bearing radial stiffness[J].Journal of Propulsion and Power, 2004,20(4):634-647.[8] BUGRA H E,JOHN M.The effect of static and dynamic misalignment on ball bearing radial stiffness[J].American Institute of Aeronautics and Astronautics,2002,35(2):325-331.[9] DAMIAN I,PALEU V,CRETU S.The Influence of the misalignment on load distribution in angular contact ball bearings[J].Applied Mechanics and Materials,2014, 658:299-304.[10] OKTAVIANA L,TONG V C,HONG S W.Skidding analysis of angular contact ball bearing subjected to radial load and angular misalignment[J].Journal of Mechanical Science and Technology,2019,33(2):837-845.[11] 张学宁,韩勤锴,褚福磊.基于简化Jones-Harris方法的球轴承接触角研究[J].振动与冲击,2013,32(13):170-175.ZHANG X N,HAN Q K,CHU F L.Contact angle of ball bearings based on a simplified Jones-Harris method[J].Vibration and Shock,2013,32(13):170-175.(in Chinese)[12] 周阳.形位误差对角接触球轴承动态特性的影响规律研究[M].长沙:湖南大学,2015.ZHOU Y.Effect of shape and position error on dynamic characteristics of diagonal contact ball bearing [M].Changsha:Hunan University,2015.(in Chinese)[13] 熊万里,周阳,赵紫生,等.高速角接触球轴承套圈倾斜角允许范围的定量研究[J].机械工程学报,2015,51(23): 46-52.XIONG W L,ZHOU Y,ZHAO Z S,et al.Quantitative study on the allowable range of tilt angle of high-speed angular contact ball bearing ring[J].Journal of Mechanical Engineering,2015,51(23): 46-52.(in Chinese)[14] 张进华,方斌,朱永生,等.基于球-滚道非完全接触状态下的球轴承载荷分布计算及刚度特性研究[J].机械工程学报,2020,32(9):73-83.ZHANG J H,FANG B,ZHU Y S,et al.Calculation of bearing load distribution and study of stiffness characteristics of spherical axle in incomplete contact state of ball-track[J].Journal of Mechanical Engineering,2020,32(9):73-83.(in Chinese)[15] 方斌,张进华,洪军,等.联合载荷作用下高速角接触球轴承快速计算方法及接触角分析[J].西安交通大学学报,2017,51(6):115-121.FANG B,ZHANG J H,HONG J,et al.Fast calculation method and contact angle analysis for high-speed angular contact ball bearing under combined loads[J].Journal of Xi'an Jiaotong University,2017,51(6):115-121.(in Chinese)[16] 曹宏瑞,李兵,陈雪峰,等.高速主轴离心膨胀及对轴承动态特性的影响[J].机械工程学报,2012,48(19):59-64.CAO H R,LI B,CHEN X F,et al.Centrifugal expansion of high speed spindle and its effect on bearing dynamic characteristics[J].Journal of Mechanical Engineering,2012,48(19):59-64.(in Chinese)[17] 邓四二,董晓,崔永存,等.双列角接触球轴承动刚度特性分析[J].兵工学报,2015,36(6):1140-1146.DENG S E, DONG X, CUI Y C,et al.Analysis of dynamic stiffness characteristics of double-row angular contact ball bearings[J].Acta Armamentarii,2015,36(6):1140-1146.(in Chinese)[18] WU W W,LI X H,XU F,et al.Investigating effects of non-uniform preload on the thermal characteristics of angular contact ball bearings through simulations[J].Proceedings of the Institution of Mechanical Engineers,Part J:Journal of Engineering Tribology,2014,228(6):667-681.
|