钽-氧化锆光纤黑体腔温度传感器特性参数测试

doi:10.3969/j.issn.1000-1093.2016.02.025

兵工学报 ›› 2016, Vol. 37 ›› Issue (2): 373-378.doi: 10.3969/j.issn.1000-1093.2016.02.025

钽-氧化锆光纤黑体腔温度传感器特性参数测试

郝晓剑^1,2，桑涛^1,2，潘保武³，周汉昌^1,2

(1.中北大学仪器科学与动态测试教育部重点实验室，山西太原 030051;

收稿日期:2015-03-22 修回日期:2015-03-22 上线日期:2016-04-22
通讯作者: 郝晓剑 E-mail:haoxiaojian2012@126.com
作者简介:郝晓剑（1969—），女，教授
基金资助:
国家自然科学基金项目(61473267)；国防技术基础科研项目（JSJC2013408C009）

Research on Characteristic Parameters of Ta-ZrO₂ Fiber Blackbody Cavity Temperature Sensor

HAO Xiao-jian^1,2，SANG Tao^1,2，PAN Bao-wu³， ZHOU Han-chang^1,2

(1.Key Laboratory of Instrumentation Science & Dynamic Measurement of Ministry of Education,North University of China, Taiyuan 030051, Shanxi, China; 2.Science and Technology on Electronic Test and Measurement Laboratory, North University of China, Taiyuan 030051, Shanxi, China; 3.School of Materials Science and Engineering, North University of China, Taiyuan 030051, Shanxi, China)

Received:2015-03-22 Revised:2015-03-22 Online:2016-04-22
Contact: HAO Xiao-jian E-mail:haoxiaojian2012@126.com

摘要/Abstract

摘要：

为了实现恶劣环境、狭小空间瞬态高温的测量，采用溅射、等离子体喷涂技术研制了蓝宝石光纤钽（熔点为2 997 ℃）-氧化锆（熔点为2 715 ℃）薄膜黑体腔瞬态高温传感器。设计了3支水电解的氢氧焰枪组成的恒温高温静态灵敏度标定装置和大功率高频可调制CO₂激光脉冲作为阶跃激励源的动态特性标定装置。测试结果表明：当静态灵敏度标定装置恒温区为1 721 ℃、传感器抗冲击能力达到50 MPa以上时，传感器测得的温度为2 802 ℃；当CO₂激光脉冲作为1 500 ℃高温阶跃输入信号时，测得该传感器时间常数为微秒数量级。

关键词: 仪器仪表技术, 〖JP9〗钽-〖JP〗氧化锆薄膜, 动态特性, 瞬态超高温, 抗冲击能力, 测试

Abstract:

In order to realize the transient high temperature measurement in the harsh environment and narrow space, a sapphire fiber tantalum (melting point 2 997 ℃) - zirconia (melting point 2 715 ℃) thin film black body cavity transient high temperature sensor is developed by the sputtering and plasma spray- ing technology. Constant high temperature static sensitivity calibration device, which is composed of three water electrolysis oxyhydrogen flame guns, and dynamic characteristic calibration device with high power and high frequency modulated CO₂ laser pulse as step excitation source are designed. The mea- sured results show that, when the temperature of constant temperature area of the static sensitivity calibration device is 1 721 ℃ and the impact resistance of the sensor is up to above 50 MPa, the temperature measured by the sensor is 2 802 ℃. When the CO₂ laser pulse is used as a high temperature step input signal at 1 500 ℃, the time constant measured by the sensor is μs order of magnitude.

Key words: apparatus and instruments technology, Ta-ZrO₂ thin film, dynamic characteristic, transient ultra-high temperature, impact-resistant capacity, measurement

中图分类号:

TP212.11

郝晓剑，桑涛，潘保武，周汉昌. 钽-氧化锆光纤黑体腔温度传感器特性参数测试[J]. 兵工学报, 2016, 37(2): 373-378.

HAO Xiao-jian，SANG Tao，PAN Bao-wu， ZHOU Han-chang. Research on Characteristic Parameters of Ta-ZrO₂ Fiber Blackbody Cavity Temperature Sensor[J]. Acta Armamentarii, 2016, 37(2): 373-378.

参考文献

［1］ Krol R VD, Liang Y Q, Schoonman J. Solar hydrogen production with nanostructured metal oxides [J]. Journal of Materials Chemistry, 2008, 20(18):2311-2320.
[2］ Feng X J, LaTempa T J, Basham J I, et al. Ta3N5 nanotube arrays for visible light water photoelectrolysis [J]. Nano Letters, 2010, 10(3):948-952.
[3］ Abe R, Higashi M, Domen K. Facile fabrication of an efficient oxynitride taon photoanode for overall water splitting into H₂ and O₂ under visible light irradiation[J]. Journal of the American Chemical Soriety, 2010, 132(34):11828-11829.
[4］ Gao Q S, Giordano C, Antonietti M. Controlled synthesis of tantalum oxynitride and nitride nanoparticles[J]. Small, 2011, 23(7):3334-3340.
[5］ Varley J B, Janotti A, Walle C G V D. Mechanism of visible-light photocatalysis in nitrogen-doped TiO₂[J]. Advanced Materials, 2011, 20(23):2343-2347.
[6］ Lin F D, Boettcher S W. Adaptive semiconductor/electrocatalyst junctions in water-splitting photoanodes [J]. Nature Materials, 2014, 13:81-86.
[7］ Hamann T W. Water splitting: an adaptive junction[J]. Nature Materials, 2014, 13:3-4.
[8］ David T S, Maurin C, Kevin S, et al. Light-induced water splitting with hematite: improved nanostructure and iridium oxide catalysis[J]. Angewandte Chemie-International Edition, 2010,49(36): 6405-6408.
[9］ Pinaud B A, Vesborg P C K, Jaramillo T F. Effect of film morphology and thickness on charge transport in Ta3N5/Ta photoanodes for solar water splitting[J]. The Journal of Physical Chemistry, 2012, 116(30):15918-15924.
[10］ Henderson S J, Hector A L. Structural and compositional variations in Ta₃N₅ produced by high-temperature ammonolysis of tantalum oxide [J]. Journal of Solid State Chemistry, 2006, 11(179): 3518-3524.
[11］ Dang H X, Hahn N T, Park H S, et al. Nanostructured Ta₃N₅ films as visible-light active photoanodes for water oxidation[J]. The Journal of Physical Chemistry, 2012, 116(36): 19225-19232.
[12］ Michalski L, Eckersdorf K, Kucharski J, et al. Temperatures measurement[M]. 2nd ed. John Wiley ＆ Sons, 2001:279-332.
[13］ Nicholas J V, White D R. Tranceable temperatures: an introduction to temperature measurement and calibration[J]. 2nd ed. John Wiley & Sons, 2001:21-24.
[14］ Laboucine C O, Kheliaf A. Periodic methord:correction for thermocouple and simultaneous estimation of themal conductivity and thermal diffusivity[J]. Review of Scientific Instruments, 2004, 75(7): 132-135.

[1]	赵文辉，孙晓恒，张伟东，郑鹏，杨帆. 四旋翼飞行器齿轮箱-支臂组件动态特性分析[J]. 兵工学报, 2022, 43(5): 1175-1184.
[2]	常丽萍，常亚南，杨雷雷. 内圈倾斜角对高速角接触球轴承动态特性的影响[J]. 兵工学报, 2021, 42(6): 1138-1147.
[3]	王书铭, 左哲清，延皓，许玲玲，董立静. 偏导射流伺服阀建模及动态特性研究[J]. 兵工学报, 2018, 39(3): 598-607.
[4]	杨丽君，田洪刚，安立明，温银堂，罗小元. 基于同面电容成像的航天隔热复合材料粘接缺陷检测方法[J]. 兵工学报, 2017, 38(12): 2488-2496.
[5]	唐晨，张茂云，曹国华，丁红昌. 基于互相关的大型机组轴系激光对中微弱信号提取方法研究[J]. 兵工学报, 2017, 38(10): 2048-2054.
[6]	孟克子，周荻. 考虑导弹自动驾驶仪动态特性的H_∞导引律[J]. 兵工学报, 2016, 37(7): 1194-1202.
[7]	蒙君煚，姜振明，张向荣，周霖. 功能助剂对2，4-二硝基苯甲醚基熔铸炸药性能的影响[J]. 兵工学报, 2016, 37(3): 424-430.
[8]	杨庆涛，王辉，朱新新，周平. 无水冷条件下温度与热流复合传感器设计与试验[J]. 兵工学报, 2016, 37(2): 193-202.
[9]	安喆，徐熙平，乔杨，张宁，吕耀文. 基于复色共焦的透明材料厚度测量数据处理方法研究[J]. 兵工学报, 2016, 37(10): 1964-1968.
[10]	高红俐，刘欢，齐子诚，刘辉，郑欢斌. 基于高速数字图像相关法的疲劳裂纹尖端位移应变场变化规律研究[J]. 兵工学报, 2015, 36(9): 1772-1781.
[11]	潘越，徐煕平，张帆，姜肇国，乔杨，李艳荻. 图像处理前照灯检测仪校准器自动检定系统[J]. 兵工学报, 2015, 36(5): 861-868.
[12]	钱立志，宁全利，李俊，蒋滨安. 基于分离式霍普金森压杆的弹载器件动态特性模拟研究[J]. 兵工学报, 2015, 36(10): 1875-1881.
[13]	孟立新，赵丁选，张立中，姜会林，李小明. 机载激光通信稳瞄吊舱设计与跟踪精度测试[J]. 兵工学报, 2015, 36(10): 1916-1923.
[14]	刘志浩, 高钦和, 牛海龙, 管文良, 李璟玥. 基于驱动端电流检测的电磁阀故障诊断研究[J]. 兵工学报, 2014, 35(7): 1083-1090.
[15]	王会峰，王晓艳，王炳健，关丽敏，汪贵平. 基于视觉序列图像分析的药室参数测量[J]. 兵工学报, 2014, 35(6): 782-788.

钽-氧化锆光纤黑体腔温度传感器特性参数测试

Research on Characteristic Parameters of Ta-ZrO₂ Fiber Blackbody Cavity Temperature Sensor

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

钽-氧化锆光纤黑体腔温度传感器特性参数测试

Research on Characteristic Parameters of Ta-ZrO2 Fiber Blackbody Cavity Temperature Sensor

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

Research on Characteristic Parameters of Ta-ZrO₂ Fiber Blackbody Cavity Temperature Sensor