[1] MASDAR A, SUHENDRO B, SISWOSUKARTO S, et al. Influence of bolt tightening's force to the strength of connection system of bamboo truss structure with wooden clamp[J]. Procedia Engineering, 2017, 171:1370-1376. [2] 侯世远, 廖日东. 螺纹联接松动过程的研究现状与发展趋势[J]. 强度与环境, 2014, 41(2):39-52. HOU S Y, LIAO R D. Research progresson self-loosening of threaded fasteners[J]. Structure and Environment Engineering, 2014, 41(2):39-52. (in Chinese)
[3] 张亮亮, 王玉林. 扭矩法与扭矩/转角法预紧力的计算及对比研究[J]. 内燃机与配件, 2016(1):7-8. ZHANG L L, WANG Y L. Computation and comparison of pre-tightening force by torque method and torque/rotation angle method[J]. Internal Combustion Engine & Parts, 2016(1):7-8. (in Chinese) [4] 吴国志. 螺栓紧固应力与紧固扭矩计算[J]. 内燃机与动力装置, 2012(1):39-41. WU G Z. Calculation of bolt fastening stress and fastening torque[J]. Internal Combustion Engine & Power Plant, 2012(1):39-41.(in Chinese)
[5] 陆鹏, 俞乐, 刘骅, 等. 用贴片光弹法研究螺栓预紧力[J]. 力学季刊, 2013, 34(2):275-278. LU P, YU L, LIU H, et al. Research on screw bolt's pre-tightening force by coating photoelasticity[J]. Chinese Quarterly of Mechanics, 2013, 34 (2): 275-278. (in Chinese)
[6] JOSHI S G, PATHARE R G. Ultrasonic instrument for measuring bolt stress[J]. Ultrasonics, 1984, 22(6):261-269. [7] 吴克成, 林水深. 螺栓应力超声测量方法的改进[J]. 华中科技大学学报(自然科学版), 1988(1):173-178. WU K C, LIN S S. Improvement of bolt stress ultrasonic measurement method[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 1988(1): 173-178. (in Chinese) [8] WALASZEK H, BOUTEILLE P. Ultrasonic stress measurement: application to preload assessment on already tightened bolts[J]. Materials Science Forum, 2006, 524/525:459-464. [9] 何存富, 吴克成. 温度对螺栓紧固应力超声测量的影响研究[J]. 实验力学, 1992(3):21-27. HE C F, WU K C. Study of the influence of temperature on bolt stress ultrasonic measurement[J]. Experimental Mechanics, 1992(3): 21-27. (in Chinese)
[10] 何存富, 吴克成. 扭转剪应力对螺栓紧固应力声弹性测量的影响研究[J]. 固体力学学报, 1992(4):337-342. HE C F, WU K C. Influence of torsional shear stress on acoustic elastic measurement of bolt fastening stress[J]. Journal of Solid Mechanics, 1992(4): 337-342. (in Chinese)
[11] 徐春广, 李骁, 潘勤学, 等. 螺栓拉应力超声无损检测方法[J]. 应用声学, 2014, 33(2):102-106. XU C G, LI X, PAN Q X, et al. Bolt stress measurements by ultrasonic non-destructive methods[J]. Journal of Applied Acoustics, 2014, 33(2): 102-106. (in Chinese)
[12] 贾雪, 王雪梅, 甘文成, 等. 声弹性效应螺栓轴向应力标定试验研究[J]. 中国测试, 2018(3):23-27. JIA X, WANG X M, GAN W C, et al. Research on calibration of bolt's axial stress based on acoustoelastic effect[J]. China Measurement & Test, 2018(3): 23-27. (in Chinese)
[13] DING X, WU X, WANG Y. Bolt axial stress measurement based on a mode-converted ultrasound method using an electromagnetic acoustic transducer[J]. Ultrasonics, 2014, 54(3):914-920. [14] KIM N, HONG M. Measurement of axial stress using mode-converted ultrasound[J]. NDT & E International, 2009, 42(3):164-169. [15] 丁旭, 武新军. 在役螺栓轴力电磁超声测量系统的研制[J]. 无损检测, 2016, 38(6):48-52. DING X, WU X J. Development of in-service bolt axial force electromagnetic ultrasonic measurement system[J]. Non-destructive Testing, 2016, 38(6):48-52. (in Chinese)
[16] CRECRAFT D I. Ultrasonic measurement of stresses[J]. Ultrasonics, 1968, 6(2):117-121. [17] HUGHES D S, KELLY J L. Second-order elastic deformation of solids[J]. Physical Review, 1953, 92(5):1145-1149. [18] FUKUOKA T, NOMURA M, MORIMOTO Y. Proposition of helical thread modeling with accurate ceometry and finite element analysis[J]. Journal of Pressure Vessel Technology, 2008, 130(1): 135-140.
第40卷 第4期2019 年4月兵工学报ACTA ARMAMENTARIIVol.40No.4Apr.2019
|