高温引起的弹头壳铜被甲材料性能变化对弹头膛内运动影响

doi:10.3969/j.issn.1000-1093.2018.06.005

兵工学报 ›› 2018, Vol. 39 ›› Issue (6): 1074-1081.doi: 10.3969/j.issn.1000-1093.2018.06.005

高温引起的弹头壳铜被甲材料性能变化对弹头膛内运动影响

杨宇召，徐诚，樊黎霞

(南京理工大学机械工程学院, 江苏南京 210094)

收稿日期:2017-08-25 修回日期:2017-08-25 上线日期:2018-07-29
通讯作者: 徐诚（1962—），男，教授，博士生导师 E-mail:xucheng62@163.com
作者简介:杨宇召(1992—), 男, 博士研究生。E-mail: yangyuzhao527@foxmail.com
基金资助:
国家自然科学基金项目(51575279)

An Analysis of Motion of Projectile in Bore with the Change of Material Properties of Copper Armor due to High Temperature

YANG Yu-zhao, XU Cheng, FAN Li-xia

（School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China)

Received:2017-08-25 Revised:2017-08-25 Online:2018-07-29

摘要/Abstract

摘要： 为了研究高温下铜被甲弹头在膛内运动状况，通过高温拉伸试验得到枪管材料和弹头壳铜被甲材料的力学性能参数，建立了铜被甲弹头在全枪管中的挤进运动有限元模型。该模型考虑了枪管在重力作用下的预弯曲以及铜被甲材料在不同温度时的力学性能。通过数值模拟研究了弹头挤进过程以及弹头在膛内运动姿态，分析了铜被甲弹头在不同温度下的挤进阻力、材料流动及变形。计算结果表明，温度越高，弹头在膛内变形越大，前进阻力也越大，弹头头部铜被甲弯曲程度越厉害；对弹头运动姿态进行分析后发现，温度越高，弹头在膛内摆动角越大，说明了热枪状态下铜被甲弹头的射击精度会下降，射弹散布变大。

关键词: 弹头, 铜被甲, 弹头挤进, 弹头受力变形, 膛内运动

Abstract: A finite element model of projectile and barrel is established to study the motion of projectile in bore at high temperature, in which the pre-bending of barrel under gravity and the mechanical properties of copper armor at different temperatures are considered. The engraving process of projectile and its motion attitude in bore are studied through numerical simulation, and the engraving resistance, material flow and deformation of projectile at different temperatures are analyzed. The mechanical properties of barrel and copper armor were obtained through high temperature tensile tests, and the processes of projectile entering into the barrel at different temperatures are analyzed. The results show that the higher the temperature is, the greater the stress, strain, deformation and swing angle of projectile will be. Key

Key words: bullet, copperarmor, projectileengraving, projectiledeformation, motionstateofprojectile

中图分类号:

TJ410.4

杨宇召，徐诚，樊黎霞. 高温引起的弹头壳铜被甲材料性能变化对弹头膛内运动影响[J]. 兵工学报, 2018, 39(6): 1074-1081.

YANG Yu-zhao, XU Cheng, FAN Li-xia. An Analysis of Motion of Projectile in Bore with the Change of Material Properties of Copper Armor due to High Temperature[J]. Acta Armamentarii, 2018, 39(6): 1074-1081.

参考文献

［1］韩文祥. 弹头挤进变形模拟问题研究[D].南京：南京理工大学, 2009.
HAN Wen-xiang. Study on the deformation process of projectile pulling into bore [D]. Nanjing: Nanjing University of Science and Technology, 2009. (in Chinese)
[2］ South J, Yiournas A. A study of the engraving of the M855 5.56 mm projectile, ARL-TR-4743[R]. Adelphi, MD, US: Army Research Laboratory, 2009.
[3］樊黎霞, 何湘玥. 弹头挤进过程的有限元模拟与分析[J].兵工学报, 2011, 32(8): 963-969.
FAN Li-xia, HE Xiang-yue. Finiteelement simulation and process analysis of projectile entering into barrel[J]. Acta Armamentarii, 2011, 32(8):963-969. (in Chinese)
[4］刘国庆, 徐诚. 狙击步枪弹准静态弹头挤进力研究[J]. 兵工学报, 2014, 35(10):1528-1535.
LIU Guo-qing, XU Cheng. Research on quasi-static engraving force of sniper rifle bullet[J]. Acta Armamentarii, 2014, 35(10): 1528-1535. (in Chinese)
[5］蒋泽一. 弹头挤进过程研究[D]. 太原:中北大学, 2014.
JIANG Ze-yi. Research on the process of projectile engraving[D]. Taiyuan:North University of China, 2014. (in Chinese)
[6］孙全兆, 杨国来, 葛建立, 等. 基于Johnson-Cook本构模型的弹带挤进过程数值模拟[J]. 弹道学报, 2015,27(2):55-61.
SUN Quan-zhao, YANG Guo-lai, GE Jian-li, et al. Numerical simulation of rotating band engraving process based on Johnson-Cook constitutive model[J]. Journal of Ballistics, 2015, 27(2): 55-61. (in Chinese)
[7］李淼, 钱林方, 孙河洋. 某大口径火炮弹带热力耦合挤进动力学数值模拟研究[J]. 兵工学报, 2016, 37(3):1803-1811.
LI Miao, QIAN Lin-fang, SUN He-yang. Research on coupled thermo-mechanical model during rotating band engraving process[J]. Acta Armamentarii, 2016, 37(10):1803-1811. (in Chinese)
[8］安俊斌, 李强, 李世康,等. 某大口径枪械弹头挤进坡膛过程的仿真分析[J]. 火炮发射与控制学报, 2017, 38（1）17-21.
AN Jun-bin, LI Qiang, LI Shi-kang,et al. Simulation analysis of projectile engraving process of the large-caliber firearm[J]. Journal of Gun Launch & Control, 2017, 38(1):17-21. (in Chinese)

第39卷第6期
2018 年6月兵工学报ACTA
ARMAMENTARIIVol.39No.6Jun.2018

[1]	郑秋杰, 郭迎福, 蔡志华, 张磊. 步枪弹高速冲击下防弹头盔功能梯度泡沫内衬的防护性能[J]. 兵工学报, 2021, 42(6): 1275-1282.
[2]	游鹏，周克栋，赫雷，缪桓举. 含运动弹头的手枪膛口射流噪声场特性[J]. 兵工学报, 2021, 42(12): 2597-2605.
[3]	潘楠，潘地林，蒋雪梅，刘益，钱俊兵，赵成俊. 基于单点激光检测的枪弹弹头快速匹配系统[J]. 兵工学报, 2021, 42(1): 91-99.
[4]	彭嘉诚，蒋建伟，廖伟. 高速旋转弹丸炸药装药在膛内运动中底层温度的数值模拟[J]. 兵工学报, 2020, 41(9): 1783-1791.
[5]	林逸雪，狄长安，狄长春，宫新宇，计寒. 基于激波传播路径的弹头斜入射双三角阵定位模型[J]. 兵工学报, 2019, 40(2): 251-256.
[6]	路丽睿，魏英杰，王聪，宋武超. 不同头型射弹低速倾斜入水空泡及弹道特性试验研究[J]. 兵工学报, 2018, 39(7): 1364-1371.
[7]	沈超，周克栋，陆野，乔自平. 某大口径机枪内膛损伤对弹头挤进过程的影响研究[J]. 兵工学报, 2018, 39(12): 2320-2329.
[8]	胡春东，董瀚，赵洪山，向多伦，王俊红，李峻松. 自润滑弹头壳用钢摩擦行为研究[J]. 兵工学报, 2018, 39(12): 2450-2458.
[9]	蔡志华, 包正, 王威, 毛征宇. 枪弹冲击防弹头盔致头部非贯穿性损伤的数值模拟研究[J]. 兵工学报, 2017, 38(6): 1097-1105.
[10]	许耀峰，丁宏民，徐坚，宁变芳. 大口径火炮膛线结构对滑动弹带弹丸膛内运动影响的数值分析[J]. 兵工学报, 2016, 37(11): 2148-2156.
[11]	陆野，周克栋，赫雷，李峻松，黄雪鹰. 坡膛结构参数对枪械内弹道挤进时期的影响研究[J]. 兵工学报, 2015, 36(7): 1363-1369.
[12]	金学科，余庆波，郑元枫，王海福. 高速侵彻体碰撞子母化学弹头有效载荷毁伤效应[J]. 兵工学报, 2015, 36(3): 437-442.
[13]	葛超，董永香，陆志超，冯顺山. 弹丸头部对斜侵彻弹道偏转影响研究[J]. 兵工学报, 2015, 36(2): 255-262.
[14]	莫根林, 吴志林, 冯杰，刘坤. 步枪弹侵彻明胶的表面受力模型[J]. 兵工学报, 2014, 35(2): 164-169.
[15]	刘国庆，徐诚. 狙击步枪弹准静态弹头挤进力研究[J]. 兵工学报, 2014, 35(10): 1528-1535.

高温引起的弹头壳铜被甲材料性能变化对弹头膛内运动影响

An Analysis of Motion of Projectile in Bore with the Change of Material Properties of Copper Armor due to High Temperature

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价