三轴转动惯量的直立振复摆与圆周扭摆协同测量方法

doi:10.12382/bgxb.2021.0383

摘要/Abstract

摘要： 质量特性测量设备在测量导弹弹头水平状态2个转动惯量分量时需要导弹弹头转动90°，为解决这个问题，提出导弹弹头三轴转动惯量的直立振复摆与圆周扭摆协同测量方法，给出该方法的实现结构和计算原理。利用导弹弹头直立姿态时沿y轴、z轴方位的摆动周期建立2个转动惯量分量间的差值关系，该关系相对比例关系更直接便捷，可以直接将这一差值关系等同于相对摆动轴线的转动惯量分量间的差值关系。结果表明：水平姿态下只需测量一个方位的转动惯量分量即能得到另一个转动惯量分量，测量值最大绝对误差0.35 kg·m²，满足定型设备1 kg·m²的精度要求；新方法有效整合了直立振复摆和圆周扭摆法各自在测量转动惯量方面的优势，实现了三轴转动惯量的便捷与高精度测量。

关键词: 导弹弹头, 三轴转动惯量, 协同测量, 直立振复摆, 圆周扭摆

Abstract: A missile warhead in the horizontal posture is supposed to rotate 90 degrees during a moment of inertia measurement. To simplify the measuring process for mass property parameters, a coordinative triaxial measuring method for moment of inertia is proposed based on the use of both a vertical vibration compound pendulum and a circular torsion pendulum. The structure of the measuring device and the calculation principle are also introduced. The difference relation between the components of the two moments of inertia along the y and z directions of the missile warhead in the vertical posture is obtained by measuring swing periods along the two axes. The method is more convenient than using the proportional relation, and it is equal to the difference relation between the components of the two moments of inertia based on the vertical vibration compound pendulum axis. The results show that the other moment of inertia can only be calculated by measuring a moment of inertia in the horizontal posture, with a maximum measuring error of 0.35 kg·m² which meets the accuracy requirement of 1 kg·m² for the finalized measuring device. The new method combines the advantages of both vibration pendulum and torsion pendulum, and improves the convenience and accuracy for measuring the triaxial moment of inertia.

Key words: missilewarhead, triaxialmomentofinertia, collaborativemeasurement, verticalvibrationcompoundpendulum, circulartorsionpendulum

中图分类号:

TJ760.6⁺29

卢志辉，孙浩智，王和，杨洪涛，武艺泳. 三轴转动惯量的直立振复摆与圆周扭摆协同测量方法[J]. 兵工学报, 2022, 43(7): 1628-1635.

LU Zhihui， SUN Haozhi， WANG He， YANG Hongtao， WU Yiyong. A Collaborative Method for Measuring the Triaxial Moment of Inertia Using the Vertical Vibration Compound Pendulum andCircular Torsion Pendulum[J]. Acta Armamentarii, 2022, 43(7): 1628-1635.

参考文献

［1］卢志辉，孙志扬，李祥云，等.高精度质心测量方法研究［J］.兵工学报，2009，30(12):1748-1752.
LU Z H，SUN Z Y，LI X Y，et al.Research on high precision measurement of centroid［J］.Acta Armamentarii，2009，30(12):1748-1752. (in Chinese)
［2］张磊乐，武艺泳，时永华.基于立式旋转平衡系统的惯性积测试方法研究［J］.计量学报，2020，41(12A):124-128.
ZHANG L L，WU Y Y，SHI Y H.Research on the method of measuring inertial product based on vertical Rotating balance system［J］.Acta Metrologica Sinica，2020，41(12A):124-128. (in Chinese)
［3］ KLAUS L.Comparison of two experiments based on a physical and a torsion pendulum to determine the mass moment of inertia including measurement uncertainties［J］.Measurement Science Review，2017，17(1): 9-18.
［4］唐文彦，李慧鹏，张春富.扭摆法测量飞行体转动惯量［J］.南京理工大学学报(自然科学版)，2008，32(1): 69-72.
TANG W Y，LI H P，ZHANG C F.Measurement of flight object's moment of inertia using torsion pendulum［J］.Journal of Nanjing University of Science and Technology (Natural Science)，2008，32(1): 69-72. (in Chinese)
［5］卢志辉，张磊乐，武艺泳，等.用于测量物体质心、转动惯量和惯性积的测量装置:CN104180940A ［P］.2016-08-17.
LU Z H，ZHANG L L，WU Y Y，et al.Measuring device for measuring center of mass，moment of inertia and inertial product: CN104180940A ［P］.2016-08-17. (in Chinese)
［6］张磊乐.细长杆件质量特性参数测量技术及设备研究［D］.郑州:郑州机械研究所有限公司，2008.
ZHANG L L.Research on the measuring technique and equipment for measurement of quality characteristic parameters of slender bar［D］.Zhengzhou:Zhengzhou Research Institute of Mechanical Engineering Co.,Ltd.,2008. (in Chinese)
［7］李慧鹏，唐文彦，张春富，等.导弹转动惯量测试系统及误差分析［J］.兵工学报，2007，28(2):206-208.
LI H P，TANG W Y，ZHANG C F，et al.A measuring system of inertia moment of missile and its error analysis［J］.Acta Armamentarii，2007，28(2):206-208. (in Chinese)
［8］车英，李占国，陈礼华，等.弹丸转动惯量测试系统及其误差分析［J］.兵工学报，2000，21(1): 87-89.
CHE Y，LI Z G，CHEN L H，et al.Development and error analysis of an inspecting system for measuring the rotational inertia of bullets［J］.Acta Armamentarii，2000，21(1): 87-89. (in Chinese)
［9］王德民，吴红刚，张健，等.基于扭摆法的三扭杆转动惯量测量装置［J］.机械设计与研究，2017，33(3): 131-133，137.
WANG D M，WU H G，ZHANG J，et al.Research on torsion pendulum based triple torsion bars device for measuring moment of inertia［J］.Machine Design and Research，2017，33(3):131-133，137. (in Chinese)
［10］卢志辉，支余吉.转动惯量标准件标准值的不确定度研究［C］∥
全国计量测试技术学术交流会论文集.北京:中国计量测试学会，2016: 256-261.
LU Z H，ZHI Y J.Research on uncertainty of standard value of moment of inertia of standard sample［C］∥Proceedings of Collection of Essays of National Symposium on Measurement and Testing Technology.Beijing: Chinese Society for Measurement，2016:256-261. (in Chinese)
［11］孙宝光，刘春兰，罗微.扭摆法测定物体的转动惯量实验中的标定研究［J］.大学物理实验，2017，30(6):53-56.
SUN B G，LIU C L，LUO W.Research on the calibration in measuring objects' processional moment by torsion pendulum method［J］.Physical Experiment of College，2017，30(6):53-56. (in Chinese)
［12］张心明，王凌云，刘建河，等.复摆法测量箭弹转动惯量和质偏及其误差分析［J］.兵工学报，2008，29(4):450-453.
ZHANG X M，WANG L Y，LIU J H，et al.The measurement of inertia moment and centroidal deviation of rocket projectile with compound pendulum method and its error analysis［J］.Acta Armamentarii，2008，29(4):450-453. (in Chinese)
［13］ HOU W，ZHENG B，YANG R F.A measuring method on moment of inertia of large-scale ammunition［J］.Journal of China Ordnance，2005，1(1):41-45.
［14］徐向辉，陈平，唐一科，等.弹箭转动惯量的振复摆法测量及误差分析［J］.弹箭与制导学报，2016，36(1):149-153.
XU X H，CHEN P， TANG Y K，et al.The inertia moment of projectile measured by vibration pendulum method and error analysis［J］.Journal of Projectiles，Rockets，Missiles and Guidance，2016，36(1):149-153. (in Chinese)
［15］张心明，王德民，李俊烨，等.基于复摆测量法阻尼对转动惯量的影响分析［J］.长春理工大学学报(自然科学版)，2018，41(4):54-59.
ZHANG X M，WANG D M，LI J Y，et al.Analysis on the influence of rotational inertia by damping based on compound pendulum measuring method［J］.Journal of Changchun University of Science and Technology (Natural Science Edition)，2018，41(4):54-59.(in Chinese)