[1] 吴万荣,秦伟业,梁向京,等. 大惯性负载液压系统启动冲击成因及控制[J]. 噪声与振动控制,2015,35(4):233-236. WU Wan-rong, QIN Wei-ye, LIANG Xiang-jing, et al. The causes and control of startup impact of hydraulic systems with high inertia loads[J]. Noise and Vibration Control, 2015, 35(4): 233- 236. (in Chinese) [2] Cerman O, Huek P. Adaptive fuzzy sliding mode control for electro-hydraulic servo mechanism[J]. Expert Systems with Applications, 2012, 39(11): 10269-10277. [3] Khansar M A, Kaynak O, Yin S, et al. Adaptive indirect fuzzy sliding mode controller for networked control systems subject to time-varying network-induced time delay[J]. IEEE Transactions on Fuzzy Systems, 2015, 23(1): 205-214. [4] Yao J Y, Jiao Z X, Ma D W. Extended-state-observer-based output feedback nonlinear robust control of hydraulic systems with backstepping[J]. IEEE Transactions on Industrial Electronics, 2014, 61(11): 6285-6293. [5] 权龙,许小庆,李敏,等. 电液伺服位置、压力复合控制原理的仿真及试验[J]. 机械工程学报,2008,44(9):100-105. QUAN Long, XU Xiao-qing, LI Min, et al. Simulation and test of electro-hydraulic servo position and pressure hybrid control principle[J]. Chinese Journal of Mechanical Engineering, 2008, 44(9): 100-105. (in Chinese) [6] 许小庆,权龙,王永进. 伺服阀流量动态校正改善电液位置系统性能的理论和方法[J]. 机械工程学报,2009,45(8):95-100. XU Xiao-qing,QUAN Long,WANG Yong-jin. Theory and methods of modifying electro-hydraulic position servo system with correction on flow rate at servo valve[J]. Journal of Mechanical Engineering, 2009, 45(8): 95-100. (in Chinese) [7] 柏艳红,权龙. 电液位置速度复合伺服系统控制策略[J]. 机械工程学报,2010, 46(24): 150-155. BAI Yan-hong, QUAN Long. Control strategy of the electro-hydraulic position and speed hybrid servo system[J]. Journal of Mechanical Engineering, 2010, 46(24): 150-155. (in Chinese) [8] 吴万荣,徐胜,梁向京,等. 负载口独立方向控制系统阀控策略[J]. 武汉大学学报:工学版,2017, 50(2): 274-279. WU Wan-rong, XU Sheng, LIANG Xiang-jing, et al. Strategy of controlling electrohydraulic proportional valve for separate meter-in and separate meter-out control system[J]. Engineering Journal of Wuhan University, 2017, 50(2): 274-279. (in Chinese) [9] 陈晓波,魏聪梅,丁鼎. 基于装载机动臂缸负载口独立控制的仿真分析[J]. 太原科技大学学报,2017,38(2):121-126. CHEN Xiao-bo, WEI Cong-mei, DING Ding.Simulation analysis of independent metering control technique based on loader hydraulic system[J]. Journal of Taiyuan University of Science and Technology, 2017, 38(2): 121-126.(in Chinese)
[10] Lu L, Yao B. Energy-saving adaptive robust control of a hydraulic manipulator using five cartridge valves with an accumulator[J]. IEEE Transactions on Industrial Electronics, 2014, 61(12): 7046-7054. [11] 顾临怡,王庆丰,路甬祥. 液压驱动的大惯性负载加减速特性研究[J]. 机械工程学报,2002,38(10):46-49. GU Lin-yi, WANG Qing-feng, LU Yong-xiang. Research on acceleration and deceleration characteristic for high inertia loads driven by hydraulic[J]. Chinese Journal of Mechanical Engineering, 2002, 38(10): 46-49. (in Chinese) [12] Choi K, Seo J, Nam Y, et al. Energy-saving in excavators with application of independent metering valve[J]. Journal of Mechanical Science and Technology, 2015, 29(1): 387-395. [13] 徐兵,丁孺琦,张军辉. 基于泵阀联合控制的负载口独立系统试验研究[J]. 浙江大学学报:工学版,2015,49(1):93-101. XU Bing,DING Ru-qi,ZHANG Jun-hui. Experiment research on individual metering systems of mobile machinery based on coordinate control of pump and valves[J]. Journal of Zhejiang University:Engineering Science, 2015, 49(1): 93-101. (in Chinese) [14] Xu B, Ding R Q, Zhang J H, et al. Pump/valves coordinate control of the independent metering system for mobile machinery[J]. Automation in Construction, 2015, 57: 98-111. [15] 孙船斌,马大为,朱忠领. 基于碰撞的全行程液压起竖油缸振动性能研究[J]. 兵工学报,2015, 36(4): 681-686. SUN Chuan-bin, MA Da-wei, ZHU Zhong-ling. Vibration performance of hydraulic erecting cylinder in collision at full stroke[J]. Acta Armamentarii, 2015, 36(4): 681-686. (in Chinese) [16] 姚晓光,郭晓松,冯永保,等. 导弹起竖过程的载荷研究[J]. 兵工学报, 2008, 29(6): 718-722. YAO Xiao-guang, GUO Xiao-song, FENG Yong-bao, et al. Load analysis on missile erection[J]. Acta Armamentarii, 2008, 29(6): 718-722. (in Chinese) [17] 张海平. 液压速度控制技术[M]. 北京:机械工业出版社,2014. ZHANG Hai-ping. Hydraulic velocity control technology[M]. Beijing: China Machine Press, 2014. (in Chinese) [18] 张利平,张津. 液压传动与控制[M]. 西安:西北工业大学出版社,2014. ZHANG Li-ping, ZHANG Jin. Hydraulic transmission and control[M]. Xi'an: Northwestern Polytechnical University Press, 2014. (in Chinese)
第39卷 第2期2018 年2月兵工学报ACTA ARMAMENTARIIVol.39No.2Feb.2018
|