[1] Watt T J, Bryant M D. Modeling assumptions for railguns[J]. IEEE Transactions on Magnetics, 2007, 43(1):380-383. [2] Rodger D, Lai H C. A comparison of formulations for 3D finite element modeling of electromagnetic launchers[J]. IEEE Transactions on Magnetics, 2001, 37(1):135-138. [3] Li X, Weng C S. Three-dimensional investigation of velocity skin effect in U-shape solid armature[J]. Progress in Natural Science 2008, 18(12):1565-1569. [4] Zuo P, Geng Y Q, Li J, et al. An approach for eddy-current calculation in railguns based on the finite-element method[J]. IEEE Transactions on Plasma Science, 2015, 43(5):1592-1596. [5] 林庆华, 栗保明. 电磁轨道炮三维瞬态涡流场的有限元建模与仿真[J]. 兵工学报, 2009, 30(9): 1159-1163. LIN Qing-hua, LI Bao-ming. 3D finite element analysis of transient eddy current in railgun[J]. Acta Armamentarii, 2009, 30(9): 1159-1163.(in Chinese) [6] Lin Q H, Li B, Kwok D Y. Transient heating effects in electromagnetic launchers with complex geometries: a 3D hybrid FE/BE analysis[J]. The European Physical Journal-Special Topics, 2009, 171(1):135-143. [7] Yamazaki K, Watari S, Egawa A. Adaptive finite element meshing for eddy current analysis of moving conductor[J]. IEEE Transactions on Magnetics, 2004, 40(2):993-996. [8] Satapathy S, Hsieh K. Jump conditions for Maxwell equations and their consequences[J]. AIP Advances, 2013, 3(1):765-773. [9] 刘福才, 李欢, 王大正, 等. 基于B 探针的膛内电枢速度测量系统研究[J]. 兵工学报, 2014, 35(6):762-768. LIU Fu-cai,LI Huan,WANG Da-zheng, et al. Research on velocity measurement of solid armature in electromagnetic launch based on B-dot probes[J]. Acta Armamentarii, 2014, 35(6):762-768.(in Chinese) |