超声横向激励下轴向运动金刚石线锯振动切割分析

doi:10.3969/j.issn.1000-1093.2014.10.020

兵工学报 ›› 2014, Vol. 35 ›› Issue (10): 1651-1658.doi: 10.3969/j.issn.1000-1093.2014.10.020

超声横向激励下轴向运动金刚石线锯振动切割分析

李伦^1，2，李淑娟¹，汤奥斐¹，李言¹

(1.西安理工大学机械与精密仪器工程学院，陕西西安 710048；

收稿日期:2013-11-26 修回日期:2013-11-26 上线日期:2014-11-28
通讯作者: 李伦 E-mail:lilunxn@163.com
作者简介:李伦（1969—），男，副教授
基金资助:
国家自然科学基金项目（51175420）

Vibration Cutting Analysis of Axially Moving Diamond Wire Saw Excited by Transverse Ultrasonic Wave

LI Lun^1,2， LI Shu-juan¹， Tang Ao-fei¹， LI Yan¹

（1.School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an 710048, Shaanxi, China;2.Henan Key Laboratory for Machinery Design and Transmission System, Henan University of Science and Technology,Luoyang 471023, Henan, China）

Received:2013-11-26 Revised:2013-11-26 Online:2014-11-28
Contact: LI Lun E-mail:lilunxn@163.com

摘要/Abstract

摘要： 金刚石线锯由于切缝窄、柔性好而广泛应用于Si、SiC等超硬脆材料的切割过程中，而超声振动在硬脆材料加工方面具有独特的优势。将超声振动应用于线锯切割过程中，在分析轴向运动弦线振动模型的基础上，利用变量分离求解出线锯在两种不同位置超声激励下横向受迫振动位移场的函数表达式以及线锯系统自然频率的函数表达式；研究讨论了线锯系统的参数对固有频率的影响；分析了线锯临界速度以及线锯往复切割时线锯中点振幅与超声激振线锯系统参数的关系；提出了工件进给速度是影响超声振动线锯切割模式的决定因素。用多普勒激光测振仪对线锯的固有频率、线锯超声激励频率和在振动切割SiC中线锯不同点处的频率进行测定，并对线锯施加超声和不施加超声切割SiC进行了对比实验。结果表明超声振动切割能减小23%～38%的切割力，能明显改善切割表面的质量。测定和实验结果与模型分析有较好的一致性。

关键词: 机械制造工艺与设备, 金刚石线锯, 超声波激励, 受迫振动响应, 振动切割, 对比切割实验

Abstract: The diamond wire saw has been widely used in cutting the hard and brittle materials, such as Si and SiC single crystals, because of its narrow kerf and great flexibility. The ultrasonic vibration has a unique benefit in cutting the ultra-hard and brittle materials. Based on the analysis of vibration model of axially moving string, the expressions of transverse vibration displacement field in which the wire saw is excited in different positions by ultrasonic wave are solved by applying the separation-of-variables method, and the expression of system natural frequency is obtained, too. The effect of wire saw system parameters on natural frequency is discussed. The critical speed of wire saw is analyzed. The relation among the midpoint amplitude of wire saw excited by ultrasonic wave when wire saw reciprocatedly cuts and the parameters of wire saw system is analyzed. It is proposed that the feed speed of workpiece is a decisive factor affecting cutting mode of wire saw excited by ultrasonic wave. Doppler laser vibrometer is used to measure the natural frequency of wire saw, the vibration response frequency of wire saw excited by ultrasonic wave, and the frequencies of wire saw in different positions when wire saw cuts SiC ingot with ultrasonic vibration. Comparative experiments of cutting SiC are carried out with and without ultrasonic vibration.The result shows that cutting forces is reduced by 23%～38% with ultrasonic vibration cutting, and the quality of the cut surface is improved obviously. The measurement and experimental results are consistent with the analysis results of model.

Key words: manufaturing technology and equipment, diamond wire saw, ultrasonic excitation, forced vibration response, vibration cutting, comparative cutting experiment

中图分类号:

TH113.1

李伦，李淑娟，汤奥斐，李言. 超声横向激励下轴向运动金刚石线锯振动切割分析[J]. 兵工学报, 2014, 35(10): 1651-1658.

LI Lun， LI Shu-juan， Tang Ao-fei， LI Yan. Vibration Cutting Analysis of Axially Moving Diamond Wire Saw Excited by Transverse Ultrasonic Wave[J]. Acta Armamentarii, 2014, 35(10): 1651-1658.

参考文献

［1］ Hardin C W, Qu J, Shih A J. Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers[J]. Materials and Manufacturing Processes, 2004, 19(2): 355-367.
[2] 曹凤国. 超声加工技术[M]. 北京：化学工业出版社，2004.
CAO Feng-guo.Ultrasonic machining technology[M].Beijing:Chemical Industry Press, 2004.(in Chinese)
[3] Zhou M . Brittle-ductile transition in the diamond cutting of glasses with the aid of ultrasonic vibration[J]. Journal of Materials Processing Technology, 2002, 121:243-251.
[4] 孟剑峰. 环形电镀金刚石线锯加工技术及加工质量研究[D]. 济南：山东大学，2006.
MENG Jian-feng. Research on processing technology and processing quality of endless electroplated diamond wire saw[D]. Jinan：Shandong University,2006. (in Chinese)
[5] 张辽远,贾春德,吕玉山.电镀金刚石线锯的超声纵振动切割加工方法[J].兵工学报，2006，27（5）：899-902.
ZHANG Liao-yuan, JIA Chun-de, LYU Yu-shan. A machining method on electroplated diamond wire saw with ultrasonic vibration[J]. Acta Armamentarii,2006，27（5）：899-902.(in Chinese)
[6] 张辽远．电镀金刚石线锯超声波切割实验装置的研制和加工机理的研究[D]．长春：长春理工大学，2007.
ZHANG Liao-yuan. Research of processing principle and development of experiment setup for electroplated diamond wire saw with ultrasonic vibration [D].Changchun:Changchun University of Science and Technology, 2007.(in Chinese)
[7] Nelson H M. Transverse vibration of a moving strip[J]. Journal of Sound and Vibration, 1979,65(3):381-389.
[8] 陈立群,Jean W Z. 轴向运动弦线的纵向振动及其控制[J]. 力学进展，2001，31（4）：535-546.
CHEN Li-qun,Jean W Z. Transverse vibration of axially moving strings and its control[J]. Advaces in Mechanics, 2001，31（4）：535-546.(in Chinese)
[9] CHEN L Q, ZhANG W, Jean W Z. Nonlinear dynamics for transverse motion of axially moving strings[J]. Chaos, Solitons and Fractals, 2009 (40):78-90.
[10] Hedrih K. Transversal forced vibrations of an axially moving sandwich belt system[J]. Archive of Applied Mechanics, 2008,78(9): 725-735.
[11] Wickert J A, Mote C D．Current research on the vibrations of an axially moving string[J]. Shock and Vibration Digest, 1988,20(5): 3-13.
[12] Oz H R.Current research on the vibration and stability of axially moving materials[J].Journal of Sound and Vibration, 2003, 259(2): 445-456.
[13] Wickert J A, Mote C D Jr. Classical vibration analysis of axially moving continua[J]. Transactions of the ASME, 1990, 57(9): 738-744.
[14] Alao Abdur-Rasheed. A fundamental study of vibration assisted machining[J].Advanced Materials Research,2011, 264/265: 1702-1707.
[15] Zhang L, Jean W Z. Nonlinear vibration of parametrically excited moving belt,partⅠ:dynamic response[J].Transactions of the ASME, 1990, 66(6): 396-402.

[1]	辛彬，李淑娟，李玉玺. 单晶硅电火花成形加工试验研究与工艺参数优化[J]. 兵工学报, 2017, 38(9): 1854-1861.
[2]	何泽地，田东宁，杨金川，姚智慧. 薄壁球壳真空吸附装夹变形力学分析与控制[J]. 兵工学报, 2017, 38(7): 1409-1415.
[3]	郑建新，刘威成，段玉涛. 7075铝合金二维超声挤压加工表面质量影响因素及其交互作用研究[J]. 兵工学报, 2017, 38(6): 1231-1238.
[4]	陈实现，刘双宇，张宏，李彦清，刘凤德. 激光-电弧复合焊等离子体特性与焊缝熔深相关性研究[J]. 兵工学报, 2017, 38(5): 978-985.
[5]	赵建社，周学德，周旭娇，汪文峰. 带冠整体叶轮电火花加工电极及其运动轨迹同步设计方法[J]. 兵工学报, 2017, 38(4): 744-749.
[6]	李强，谢里阳，李海洋，张芳敏，宋佳昕. 基于模糊综合层次评判法的精密齿轮制造工艺优化优先度分析[J]. 兵工学报, 2017, 38(4): 750-757.
[7]	林涛, 杨炜, 王健. 基于快速抛光技术的光学元件材料去除模型研究[J]. 兵工学报, 2017, 38(3): 527-533.
[8]	杨臻，张平，蔡志海，秦航. 高强钢激光-电弧复合焊接接头力学性能研究[J]. 兵工学报, 2017, 38(3): 549-554.
[9]	陆益敏，黄国俊，郭延龙，丁方正，陈霞，韦尚方，米朝伟. 激光沉积大面积均匀类金刚石膜的设计改进及实验[J]. 兵工学报, 2017, 38(3): 555-560.
[10]	崔凤奎，凌远非，薛进学，李玉玺，李言，解克各. 花键冷滚打成形表层加工硬化研究[J]. 兵工学报, 2017, 38(2): 358-366.
[11]	张国华，李咚咚，李茂伟，张德远. 超声椭圆振动车削三维形貌形成研究[J]. 兵工学报, 2017, 38(10): 2002-2009.
[12]	李俊烨，卫丽丽，张心明，乔泽民. 介观尺度下磨粒流抛光温度对发动机喷油嘴质量影响研究[J]. 兵工学报, 2017, 38(10): 2010-2018.
[13]	张发平，吴迪，张体广，张凌雲，杨吉彬. 基于盲源信号分离的加工误差分离方法研究[J]. 兵工学报, 2016, 37(9): 1692-1699.
[14]	秦国华，孙烁，王华敏，左敦稳，吴铁军，鲁宇明. 基于工件稳定性的全区域夹紧力变向迭代规划算法[J]. 兵工学报, 2016, 37(9): 1700-1707.
[15]	巩亚东，孙瑶，刘寅. 低速单向走丝电火花线切割钛合金TC4表面粗糙度试验研究与建模[J]. 兵工学报, 2016, 37(6): 1058-1065.

超声横向激励下轴向运动金刚石线锯振动切割分析

Vibration Cutting Analysis of Axially Moving Diamond Wire Saw Excited by Transverse Ultrasonic Wave

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价