激光沉积大面积均匀类金刚石膜的设计改进及实验

doi:10.3969/j.issn.1000-1093.2017.03.019

兵工学报 ›› 2017, Vol. 38 ›› Issue (3): 555-560.doi: 10.3969/j.issn.1000-1093.2017.03.019

激光沉积大面积均匀类金刚石膜的设计改进及实验

陆益敏，黄国俊，郭延龙，丁方正，陈霞，韦尚方，米朝伟

（武汉军械士官学校光电技术研究所，湖北武汉 430075）

收稿日期:2016-06-24 修回日期:2016-06-24 上线日期:2017-04-24
作者简介:陆益敏(1981—)，男，讲师，博士。E-mail：luyimin_zy@163.com
基金资助:
国家部委预先研究项目（51318060212）

Improved Design and Experiment for Preparing Uniform Optical DLC Film by Large Area PLD

LU Yi-min, HUANG Guo-jun, GUO Yan-long, DING Fang-zheng, CHEN Xia, WEI Shang-fang, MI Chao-wei

(Opto-Electronics Institute, Wuhan Institute of Ordnance Officer, Wuhan 430075, Hubei, China)

Received:2016-06-24 Revised:2016-06-24 Online:2017-04-24

摘要/Abstract

摘要： 针对激光等离子体的边缘粒子对激光沉积类金刚石膜性能的不利影响，改进自转衬底一维变速平移技术的大面积均匀镀膜机构。利用开孔的挡板滤除等离子体边缘的粒子，同时在原有膜厚分布数学模型中加入相应的模块；通过优化模型中的机构运动参数，指导实验获得了直径200 mm的大面积均匀类金刚石膜。测试结果表明：该类金刚石膜的不均匀性为±4.5%，且膜厚分布特征与理论优化结果相同，同时纳米硬度和红外透过率较改进前显著提高；相对于改进前的大面积均匀镀膜技术，改进后的机构具有更实际的应用价值。

关键词: 机械制造工艺与设备, 光学薄膜, 脉冲激光沉积, 类金刚石膜, 大面积均匀薄膜

Abstract: The former coating setup for uniform film is improved by considering the effect of the peripheral particles of plasma on the diamond-like carbon (DLC) film prepared by pulsed laser deposition (PLD). A shield with an aperture is inserted between the substrate and the target to remove the peripheral particles and only allow the centric particles pass the aperture. A corresponding module is added in the mathematical model for thickness distribution of film. The uniform diamond-like carbon film with 200 mm in diameter is prepared after simulation and optimization of model. The test results show that thickness variation of film is ±4.5%, and the thickness distribution characteristics are the same as the optimized results. Moreover, the nanohardness and infrared transmittance of film are apparently increased compared with those of the film prepared before improvement. Key

Key words: manufaturingtechnologyandequipment, opticalthinfilm, pulsedlaserdeposition, diamond-likecarbonfilm, largeareauniformfilm

中图分类号:

TN304.2

陆益敏，黄国俊，郭延龙，丁方正，陈霞，韦尚方，米朝伟. 激光沉积大面积均匀类金刚石膜的设计改进及实验[J]. 兵工学报, 2017, 38(3): 555-560.

LU Yi-min, HUANG Guo-jun, GUO Yan-long, DING Fang-zheng, CHEN Xia, WEI Shang-fang, MI Chao-wei. Improved Design and Experiment for Preparing Uniform Optical DLC Film by Large Area PLD[J]. Acta Armamentarii, 2017, 38(3): 555-560.

参考文献

［1］薛群基, 王立平. 类金刚石碳基薄膜材料[M]. 北京:科学出版社, 2012.
XUE Qun-ji, WANG Li-ping. Thin film materials of carbon-base DLC[M]. Beijing: Science Press, 2012. (in Chinese)
[2］ Bewilogua K, Hofmann D. History of diamond-like carbon films—from first experiments to world wide applications[J]. Surface & Coatings Technology, 2014, 242(4): 214-225.
[3］ Eason R. Pulsed laser deposition of thin films: applications-led growth of functional materials[M]. NY, US: John Wiley & Sons Inc, 2007.
[4］ Lackner J M. Industrially-scaled large-area and high-rate tribological coating by pulsed laser deposition[J]. Surface & Coatings Technology, 2005, 200(5/6):1439-1444.
[5］ Lackner J M, Waldhauser W, Ebner R. Large-area high-rate pulsed laser deposition of smooth TiCxN_1-x coatings at room temperature — mechanical and tribological properties[J]. Surface and Coatings Technology, 2004, 188/189:519-524.
[6］ Pryds N, Schou J, Linderoth S. The spatial thickness distribution of metal films produced by large area pulsed laser deposition[J]. Applied Surface Science, 2007, 253(19): 8231-8234.
[7］ Pryds N, Toftmann B, Bilde-Srensen J B, et al. Thickness determination of large-area films of yttria-stabilized zirconia produced by pulsed laser deposition[J]. Applied Surface Science, 2006, 252(13): 4882-4885.
[8］张磊, 王秀凤, 林晓东. 脉冲激光沉积类金刚石薄膜的厚度均匀性建模[J]. 西南科技大学学报, 2007, 22(4):14-19.
ZHANG Lei, WANG Xiu-feng, LIN Xiao-dong. The thickness uniformity modeling for DLC films obtained by PLD[J]. Journal of Southwest University of Science and Technology, 2007, 22(4):14-19. (in Chinese)
[9］王晟, 叶景峰, 刘晶儒, 等. 光溅射镀膜均匀性的优化模拟[J]. 光子学报, 2010, 39(9):1544-1547.
WANG Sheng, YE Jing-feng, LIU Jing-ru, et al. Optimal simulation for the thickness uniformity of the film deposited by pulse laser sputtering[J]. Acta Photonica Sinica, 2010, 39(9): 1544-1547.(in Chinese)

[10］陆益敏, 王淑云, 郭延龙, 等. 激光沉积大面积均匀薄膜数学模型与实验[J]. 强激光与离子束, 2015, 27(7): 41-45.
LU Yi-min, WANG Shu-yun, GUO Yan-long, et al. Mathematical model and experiment for preparing uniform film by PLD on large surface[J]. High Power Laser and Particle Beams, 2015, 27(7): 41-45.(in Chinese)
[11］郭延龙, 程勇, 陆益敏, 等. 沉积角度对激光沉积类金刚石膜的影响[J]. 真空科学与技术学报, 2014, 34(9): 970-973.
GUO Yan-long, CHENG Yong, LU Yi-min, et al. Growth and properties characterization of diamond-like-carbon films by KrF pulsed laser deposition[J]. Chinese Journal of Vacuum Science and Technology, 2014, 34(9): 970-973.(in Chinese)

第38卷
第3期2017 年3月兵工学报ACTA
ARMAMENTARIIVol.38No.3Mar.2017

[1]	辛彬，李淑娟，李玉玺. 单晶硅电火花成形加工试验研究与工艺参数优化[J]. 兵工学报, 2017, 38(9): 1854-1861.
[2]	何泽地，田东宁，杨金川，姚智慧. 薄壁球壳真空吸附装夹变形力学分析与控制[J]. 兵工学报, 2017, 38(7): 1409-1415.
[3]	郑建新，刘威成，段玉涛. 7075铝合金二维超声挤压加工表面质量影响因素及其交互作用研究[J]. 兵工学报, 2017, 38(6): 1231-1238.
[4]	陈实现，刘双宇，张宏，李彦清，刘凤德. 激光-电弧复合焊等离子体特性与焊缝熔深相关性研究[J]. 兵工学报, 2017, 38(5): 978-985.
[5]	赵建社，周学德，周旭娇，汪文峰. 带冠整体叶轮电火花加工电极及其运动轨迹同步设计方法[J]. 兵工学报, 2017, 38(4): 744-749.
[6]	李强，谢里阳，李海洋，张芳敏，宋佳昕. 基于模糊综合层次评判法的精密齿轮制造工艺优化优先度分析[J]. 兵工学报, 2017, 38(4): 750-757.
[7]	林涛, 杨炜, 王健. 基于快速抛光技术的光学元件材料去除模型研究[J]. 兵工学报, 2017, 38(3): 527-533.
[8]	杨臻，张平，蔡志海，秦航. 高强钢激光-电弧复合焊接接头力学性能研究[J]. 兵工学报, 2017, 38(3): 549-554.
[9]	崔凤奎，凌远非，薛进学，李玉玺，李言，解克各. 花键冷滚打成形表层加工硬化研究[J]. 兵工学报, 2017, 38(2): 358-366.
[10]	张国华，李咚咚，李茂伟，张德远. 超声椭圆振动车削三维形貌形成研究[J]. 兵工学报, 2017, 38(10): 2002-2009.
[11]	李俊烨，卫丽丽，张心明，乔泽民. 介观尺度下磨粒流抛光温度对发动机喷油嘴质量影响研究[J]. 兵工学报, 2017, 38(10): 2010-2018.
[12]	张发平，吴迪，张体广，张凌雲，杨吉彬. 基于盲源信号分离的加工误差分离方法研究[J]. 兵工学报, 2016, 37(9): 1692-1699.
[13]	秦国华，孙烁，王华敏，左敦稳，吴铁军，鲁宇明. 基于工件稳定性的全区域夹紧力变向迭代规划算法[J]. 兵工学报, 2016, 37(9): 1700-1707.
[14]	巩亚东，孙瑶，刘寅. 低速单向走丝电火花线切割钛合金TC4表面粗糙度试验研究与建模[J]. 兵工学报, 2016, 37(6): 1058-1065.
[15]	孔令飞，牛晗，侯晓丽，林宏斌，王杰. 错齿内排屑刀具深孔加工中的刀具振动特性对孔圆度形貌的作用机制[J]. 兵工学报, 2016, 37(6): 1066-1074.

激光沉积大面积均匀类金刚石膜的设计改进及实验

Improved Design and Experiment for Preparing Uniform Optical DLC Film by Large Area PLD

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价