中心锥鳞片阀吸气式脉冲爆轰发动机推力试验研究

doi:10.3969/j.issn.1000-1093.2014.10.001

兵工学报 ›› 2014, Vol. 35 ›› Issue (10): 1521-1527.doi: 10.3969/j.issn.1000-1093.2014.10.001

• 论文 • 下一篇

中心锥鳞片阀吸气式脉冲爆轰发动机推力试验研究

胡焰彬，翁春生，白桥栋，杨建鲁，黄孝龙

（南京理工大学瞬态物理国家重点实验室，江苏南京 210094）

收稿日期:2014-01-10 修回日期:2014-01-10 上线日期:2014-11-28
通讯作者: 胡焰彬 E-mail:bingyanhu123@126.com
作者简介:胡焰彬（1985—），男，博士研究生
基金资助:
国家自然科学基金项目（11372141）；中央高校基本科研业务费专项（30920130112007）

Experimental Research of the Thrust of Air-Breathing Pulse Detonation Engine with Central Cone-scales Valve

HU Yan-bin, WENG Chun-sheng, BAI Qiao-dong, YANG Jian-lu, HUANG Xiao-long

(National Key Laboratory of Transient Physics, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China)

Received:2014-01-10 Revised:2014-01-10 Online:2014-11-28
Contact: HU Yan-bin E-mail:bingyanhu123@126.com

摘要/Abstract

摘要： 为提高吸气式脉冲爆轰发动机的推力，进行了中心锥鳞片阀与中心锥钝体阀吸气式脉冲爆轰发动机（PDE）的对比试验研究，并对多循环吸气式脉冲爆轰发动机工作过程的受力状况进行分析。研究结果表明：采用压电式力传感器能准确测量多循环吸气式脉冲爆轰发动机的平均推力；在10 Hz相同工况下，中心锥鳞片阀吸气式PDE的平均推力是中心锥钝体阀吸气式PDE平均推力的2.05倍。研究结果对多循环吸气式PDE推力的直接测量以及提高吸气式PDE的推进性能具有重要意义。

关键词: 兵器科学与技术, 脉冲爆轰发动机, 吸气式, 进气阀, 推力, 直接测量

Abstract: In order to improve the thrust of air-breathing pulse detonation engine, the air-breathing pulse detonation engines with central cone-scales valve (CCSV) and central cone-blunt valve (CCBV) are investigated, and the force condition of multi-cycle air-breathing pulse detonation engine during working is analyzed. The results show that the average thrust of multi-cycle air-breathing pulse detonation engine can be accurately measured by using the piezoelectric force sensor. Furthermore, the average thrust of air-breathing pulse detonation engine with CCSV is 2.05 times as high as that of the engine with CCBV at 10 Hz. For this point of view, the results are significant to the direct measurement of the thrust of multi-cycle air-breathing pulse detonation engine and the improvement of the propulsion performance of air-breathing pulse detonation engine.

Key words: ordnance science and technology, pulse detonation engine, air-breathing, inlet valve, thrust, direct measurement

中图分类号:

V235.22

胡焰彬，翁春生，白桥栋，杨建鲁，黄孝龙. 中心锥鳞片阀吸气式脉冲爆轰发动机推力试验研究[J]. 兵工学报, 2014, 35(10): 1521-1527.

HU Yan-bin, WENG Chun-sheng, BAI Qiao-dong, YANG Jian-lu, HUANG Xiao-long. Experimental Research of the Thrust of Air-Breathing Pulse Detonation Engine with Central Cone-scales Valve[J]. Acta Armamentarii, 2014, 35(10): 1521-1527.

参考文献

［1］ Dominique P, Alban P, Laurent S. Performance of a valveless air breathing pulse detonation engine，AIAA 2004-3749［R］.Florida：AIAA/ASME/SAE/ASEE,2004.
［2］ Wang Z W, Yan C J, Fan W, et al. Experimental study of kerosene/air valveless air-breathing pulse detonation engines，AIAA 2009-1066［R］.Florida：AIAA，2009 .
［3］李建中, 王家骅, 唐豪, 等. 煤油/空气三管气动阀式脉冲爆震发动机［J］. 航空学报, 2009, 30(11):2052-2058.
LI Jian-zhong, WANG Jia-hua, TANG Hao, et al. Kerosene/air triple-tube aero-valve pulse detonation engine［J］. Acta Aeronautica et Astronautica Sinica, 2009, 30(11):2052-2058. (in Chinese)
［4］郑龙席, 严传俊, 范玮, 等. 脉冲爆震发动机推力测试方法分析与比较［J］. 测控技术, 2006, 25(4):37-41.
ZHENG Long-xi, YAN Chuan-jun, FAN Wei, et al. Analysis and comparison of pulse detonation engine thrust measuring methods［J］. Measurement & Control Technology, 2006, 25(4):37-41. (in Chinese)
［5］张义宁, 王家骅, 张靖周. 多循环吸气式脉冲爆震发动机推力直接测量［J］. 推进技术, 2006, 27(5):459-462.
ZHANG Yi-ning, WANG Jia-hua, ZHANG Jing-zhou. Impulse of cyclic air-breathing pulse detonation engine［J］. Journal of Propulsion Technology, 2006, 27(5):459-462. (in Chinese)
［6］陈文娟, 张群, 严传俊, 等. 吸气式脉冲爆震发动机原理性试验研究［J］. 实验流体力学, 2009, 23(2):26-30.
CHEN Wen-juan, ZHANG Qun, YAN Chuan-jun, et al. Elementary experimental investigation of air-breathing pulse detonation engines［J］. Journal of Experiments in Fluid Mechanics, 2009, 23(2):26-30. (in Chinese)
［7］李海鹏, 何立明, 李天亮, 等. 钝体/阻流孔式气动阀工作机理及流阻特性研究［J］. 航空动力学报, 2008, 23(8):1480-1485.
LI Hai-peng, HE Li-ming, LI Tian-liang, et al. Research on mechanism and flow drag character of an aerodynamic valve with blunt block and backflow damping orifices［J］. Journal of Aerospace Power, 2008, 23(8):1480-1485. (in Chinese)
［8］郑殿峰, 王家骅, 王波, 等. 脉冲爆震发动机旋流式气动阀工作机理和扰流器阻力特性的实验研究［J］. 南京航空航天大学学报, 2005, 37(1):101-105.
ZHENG Dian-feng, WANG Jia-hua, WANG Bo, et al. Experimental investigation on mechanism of swirling aerovalve and drag coefficient of turbulence generation in PDE［J］. Journal of Nanjing University of Aeronautics & Astronautics, 2005, 37(1):101-105. (in Chinese)
［9］宫继双, 范育新, 王家骅, 等. 脉冲爆震发动机倒旋流气动阀数值与实验研究［J］. 航空动力学报, 2011, 26(8):1719-1726.
GONG Ji-shuang, FAN Yu-xin, WANG Jia-hua, et al. Numerical and experimental study on inversing-rotating aero-valves of PDE［J］. Journal of Aerospace Power, 2011, 26(8):1719-1726. (in Chinese)
［10］李建中, 王家骅. 煤油/空气脉冲爆震发动机气动阀研究［J］. 南京航空航天大学学报, 2008, 40(3):279-283.
LI Jian-zhong, WANG Jia-hua. Aerovalves of kerosene/air pulse detonation engine［J］. Journal of Nanjing University of Aeronautics & Astronautics, 2008, 40(3):279-283. (in Chinese)
［11］马丹花, 翁春生. 爆震管内扰流片对爆震波影响的数值分析［J］. 推进技术, 2011, 32(3):425-430.
MA Dan-hua, WENG Chun-sheng. Numerical investigation of two-phase detonation with the osbstacles［J］. Journal of Propulsion Technology, 2011, 32(3):425-430. (in Chinese)
［12］严传俊, 范玮. 脉冲爆震发动机原理及关键技术［M］. 西安:西北工业大学出版社, 2005:293-296.
YAN Chuan-jun, FAN Wei. Principle and key technology of pulse detonation engine［M］. Xi'an:Northwestern Polytechnical University Press, 2005:293-296. (in Chinese)
［13］ PCB Piezotronics Inc. Model 200B05 installation and operating manual［EB/OL］. ［2014-04-14］. http:∥www.pcb.com/products.aspx?m=200B05.htm.
［14］彭振. 等离子体点火对脉冲爆轰发动机两相爆轰影响的研究［D］. 南京:南京理工大学, 2011.
PENG Zhen. The studies of effect of plasma ignition on two-phase detonation in pulse detonation engine［D］. Nanjing:Nanjing University of Science and Technology, 2011. (in Chinese)
［15］ Roy G D, Frolov S M, Netzer D W, et al. High speed deflagration and detonation:fundamentals and control［M］. Moscow:Elex-KM, 2000:315-332.

[1]	康杨，李宁，黄孝龙，翁春生. 基于环形喷管的脉冲爆轰发动机爆轰声波声学特性[J]. 兵工学报, 2022, 43(5): 1075-1082.
[2]	魏万里，郑权，鲁江涛，翁春生，武郁文. 中心锥对液态燃料旋转爆轰发动机工作过程与性能的影响[J]. 兵工学报, 2021, 42(6): 1185-1194.
[3]	蔺君，何英姿，黄盘兴. 带推力高超声速飞行器非连续点火再入轨迹研究[J]. 兵工学报, 2020, 41(7): 1307-1316.
[4]	张小圆，李世鹏，杨保雨，王勇，童悦，王宁飞. 潜航飞行体深水超音速气体射流的流动稳定性研究[J]. 兵工学报, 2019, 40(12): 2385-2398.
[5]	王大鹏，金星，周伟静，李南雷. 星载微推进器推力测量中电容位移传感器极板不平行误差分析[J]. 兵工学报, 2018, 39(4): 816-824.
[6]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[7]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[8]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[9]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[10]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[11]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[12]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[13]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[14]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[15]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.

中心锥鳞片阀吸气式脉冲爆轰发动机推力试验研究

Experimental Research of the Thrust of Air-Breathing Pulse Detonation Engine with Central Cone-scales Valve

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价