[1] 运新兵,宋宝韫,陈莉. 连续等径角挤压制备超细晶铜[J]. 中国有色金属学报, 2006, 16(9): 1563-1569. YUN Xin-bing, SONG Bao-yun, CHEN Li. Ultra-fine grain copper prepared by continuous equal channel angular press[J]. The Chinese Journal of Nonferrous Metal, 2006, 16(9): 1563-1569. (in Chinese) [2] 丁雨田,斯志军,周怀存,等. 等径角挤压对纯铜组织与性能的影响[J]. 兰州理工大学学报, 2007, 33(6): 10-12. DING Yu-tian, SI Zhi-jun, ZHOU Huai-cun, et al. Effect of equal channel angular pressing on microstructure and properties of pure copper[J]. Journal of Lanzhou University of Technology, 2007, 33(6): 10-12. (in Chinese) [3] Rodak K, Radwański K. Structural stability of Cu processed by severe plastic deformation method[J]. Solid State Phenomena, 2010,163: 114-117. [4] Popov V V,Stolbovkiy A V,Popova E N,et al. Structure and thermal stability of Cu after severe plastic deformation[J]. Defect and Diffusion Forum, 2010,297-301: 1312-1321. [5] 肖攀. 高速冲击挤进问题的动力学建模与瞬态有限元分析[D]. 南京: 南京理工大学, 2002. XIAO Pan. Dynamics modeling and transient FEA analysis of high speed impact and extrusion problem[D]. Nanjing: Nanjing University of Science and Technology, 2002. (in Chinese) [6] 李建军. 铸造镁合金弹塑性变形的多尺度模型研究[D]. 重庆: 重庆大学, 2006 LI Jian-jun. Studying inmulti-scales model of elastoplastic deformation for casting magnesium alloy[D]. Chongqing: Chongqing University, 2006. (in Chinese) [7] 全国钢标准化技术委员会. GB/T 4340.1—2009, 金属材料维氏硬度试验第1部分: 试验方法[S]. 北京: 中国国家标准化管理委员会, 2010 National Technical Committee on Iron and Steel of Standardization Administration of China. GB/T 4340.1—2009, Metallic materials-Vickers hardness test Part 1: Test method[S]. Beijing: Standardization Administration of the People’s Republic of China, 2010. (in Chinese) [8] 洛阳铜加工厂中心试验室金相组. 铜及铜合金金相图谱[M]. 北京: 冶金工业出版社, 1983 Metallographical Group of Central Laboratory in Luoyang Copper Processing Plant. Collection of metallographs on copper and copper alloy[M]. Beijing: Metallurgical Industry Press, 1983. (in Chinese) [9] Kato K, Hamatani D, Matsuda K. HRTEM observation of α-Phase in Cu-Zn alloy annealed at lower temperature[J]. Advanced Materials Research,2007,26-28: 1279-1282. [10] 陈桂东,周彦煌. 自行火炮身管温度响应试验及数值模拟[J]. 弹道学报, 2003, 15(3): 24-28. CHEN Gui-dong, ZHOU Yan-huang. Simulated and experimental in-wall temperatures for 155 mm gun[J]. Journal of Ballistic, 2003, 15(3): 24-28. (in Chinese) [11] 郭锥. 基于单片机的膛壁温度报警系统设计[D]. 南京: 南京理工大学, 2006. GUO Zhui. Design of inside-wall temperature alarming system based on single chip computer[D]. Nanjing: Nanjing University of Science and Technology, 2006. (in Chinese) [12] 温诗铸,黄平. 摩擦学原理[M]. 第3版. 北京: 清华大学出版社, 2008 WEN Shi-zhu, HUANG Ping. Principles of tribology[M]. 3rd ed. Beijing: Tsinghua University Press, 2008. (in Chinese) [13] 彭志国, 周彦煌, 齐丽婷. 火炮内膛涂油弹炮接触熔化热流体模型与分析[J]. 南京理工大学学报:自然科学版, 2008, 32(1): 13-17. PENG Zhi-guo, ZHOU Yan-huang, QI Li-ting. Model and analysis of melt-lubrication between band and tube with oil on gun internal surface[J]. Journal of Nanjing University of Science and Technology: Natural Science, 2008, 32(1): 13-17. (in Chinese) |