枪械出厂前瞄准等效及其射效自动校正方法

doi:10.12382/bgxb.2021.0607

摘要/Abstract

摘要： 为改变传统以实弹试射为主的枪械出厂前射效校正，提出一种枪械瞄准等效及枪械射效自动校正的方法。基于光学原理和图像识别方法，考虑配合误差等因素建立了射线及瞄准基线的等效空间模型；综合外弹道特性以及相对位置误差的影响，建立了机械瞄具校调数学模型，输入光电检测及信号排异处理得到的等效光束信号集，计算获得校调参数；开发了一套枪械射效自动校正装置和软件系统。通过试验验证表明，枪械瞄准等效和射效自动校正方法有效、可行，可以满足枪械出厂前射击精度要求下机械瞄具的自动化校正要求。

关键词: 枪械射效校正, 等效方法, 误差补偿, 自动校正

Abstract: A method of gun aiming equivalence and shooting efficiency autocorrection of firearms is proposed to replace the traditional pre-delivery shooting correction process mainly based on live-shot tests. Based on optical principles and an image recognition method, an equivalent space model for launching line and aiming baseline is established with factors such as matching errors considered. Based on the external ballistic characteristics and relative position errors, a mathematical model for mechanical aiming adjustment is established. Input photoelectric detection and signal exclusion processing are used to calculate the equivalent beam signal set and then obtain the calibration parameters. A set of autocorrection device and software system for shooting efficiency has been developed. Test results show that the autocorrection method is effective and feasible to meet the shooting accuracy requirements before delivery.

Key words: gunshootingeffectcorrection, equivalentmethod, errorcompensation, autocorrection

中图分类号:

TJ208

李睿冬, 刘科言, 曹岩枫, 王永娟. 枪械出厂前瞄准等效及其射效自动校正方法[J]. 兵工学报, 2022, 43(9): 2274-2282.

LI Ruidong, LIU Keyan, CAO Yanfeng, WANG Yongjuan. Gun Aiming Equivalence and Shooting Efficiency Autocorrection before Delivery[J]. Acta Armamentarii, 2022, 43(9): 2274-2282.

参考文献

［1］陈一中，周群乐，田国辉.武器出厂前校枪方法探索[J].四川兵工学报，2003，24(3):18-20.
CHEN Y Z，ZHOU Q L，TIAN G H.Exploration on methods of calibrating weapons before they leave factory[J].Sichuan Military Engineering Journal，2003，24(3): 18-20. (in Chinese)
[2] 任传铭，尤立宁.激光校枪器的研究与实践[J].兵器装备工程学报，2017，38(5):78-81.
REN C M，YOU L N.Research and practice of laser gun calibrator[J].Journal of Weaponry and Equipment Engineering，2017，38(5): 78-81. (in Chinese)
[3] 艾春玲.一种校枪装置以及校枪方法:CN109443082A[P].2019-03-08.
AI C L.A gun calibration device and a gun calibration method:CN109443082A[P].2019-03-08. (in Chinese)
[4] 吴天文.智能化全自动校枪系统及方法:CN106017217A[P].2016-10-12.
WU T W.Intelligent automatic gun calibration system and method:CN106017217A[P].2016-10-12. (in Chinese)
[5] 浙江震坤实业有限公司.一种多功能无弹校枪仪:CN207610612U[P].2018-07-13.
Zhejiang Zhenkun Industrial Co.，Ltd.A multi-function bullet-free calibrator:CN207610612U[P].2018-07-13. (in Chinese)

[6] 石家庄卓研电子科技有限公司.一种便携式激光校枪靶仪:CN209445891U[P].2019-09-27
Shijiazhuang Zhuoyan Electronic Technology Co，Ltd.A portable laser target calibrator:CN209445891U[P].2019-09-27. (in Chinese)
[7] 罗超群.射击训练中的自动报靶和校枪技术[D].广州：华南理工大学，2018.
LUO C Q.Automatictarget-shooting and gun-proofing techniques in shooting training[D].Guangzhou:South China University of Technology，2018. (in Chinese)
[8] MANUEL G，CARLOS T.Automatic scoring of shooting targets with tournament precision[J].Frontiers in Artificial Intelligence and Applications，2012，243:324-334.
[9] 罗杰，张之明.基于图像处理技术自动报靶系统综述[J].激光杂志，2016，37(7):1-6.
LUO J，ZHANG Z M.Overview of automatic target report system based on image processing technology[J].Laser Magazine，2016，37(7):1-6. (in Chinese)
[10] XIAN J J，LI Z，WU S X.A laser simulated shooting system based on image recognition[C]∥Proceeding of the 2015 10th International Conference on Computer Science & Education. Cambridge，UK:IEEE，2015:735-739.
[11] 张晓云，杨宇召，徐诚.一种枪械射弹散布预测方法[J].弹道学报，2019，31(3):24-29.
ZHANG X Y，YANG Y Z，XU C.Prediction technique for dispersion of gun[J].Journal of Ballistics，2019，31(3):24-29. (in Chinese)
[12] 安宝林，杨耿，薛晋生.基于CCD成像技术的枪械射击准确度验收系统[J].兵工学报，2010，31(2):239-241.
AN B L，YANG G，XUE J S.Firing accuracy acceptance equipment of gun based on CCD imaging technique[J].Acta Armamentarii，2010，31(2):239-241.(in Chinese)
[13] 王中原，史金光，常思江，等.弹道修正弹技术发展综述[J].弹道学报，2021，33(2):1-12.
WANG Z Y，SHI J G，CHANG S J，et al.Review on development of technology of trajectory correction projectile[J].Journal of Ballistics，2021，33(2):1-12. (in Chinese)
[14] 王瑞林，曹金荣，贾云非.枪械结构原理[M].北京：国防工业出版社，2015：62-85.
WANG R L，CAO J R，JIA Y F.Structural principle of firearms[M].Beijing:National Defense Industry Press，2015：62-85. (in Chinese)
[15] 步兵自动武器及弹药设计手册[M].上册.北京：国防工业出版社，1977：57-66.
Infantry automatic weapons and ammunition design manual[M].volume I.Beijing:National Defense Industry Press，1977：57-66. (in Chinese)
[16] 沈超，周克栋，赫雷，等.枪管内膛损伤对弹头外弹道过程的影响研究[J].北京理工大学学报，2020，40(6):623-631.
SHEN C，ZHOU K D，HE L，et al.The influence of bore damage on bullet's exterior ballistics process[J].Transactions of Beijing Institute of Technology，2020，40(6):623-631. (in Chinese)
[17] 地面火炮外弹道表[M].下册.北京：国防工业出版社，1977：27-104.
Ground gun external ballistic table[M].volume 2.Beijing:National Defense Industry Press，1977：27-104. (in Chinese)
[18] 薛萍，何海，王宏民.基于径向基函数网络的光学测量系统误差修正算法[J].光学学报，2020，40(2):1-7.
XUE P，HE H，WANG H M.Error correction algorithm for optical measurement system based on radial basis function network[J].Acta Optica Sinica，2020，40(2):1-7. (in Chinese)
[19] 李伟，刘志芳.基于数据挖掘的激光光斑中心检测定位算法[J].激光杂志，2019，40(6):176-180.
LI W，LIU Z F.Location algorithm for laser spot center detection based on data mining[J].Laser Magazine，2019，40(6):176-180. (in Chinese)
[20] 帅红俊，张帅，宋建涛，等.基于光斑跟踪系统的位敏传感器误差修正[J].红外与激光工程，2016，45(4):1-6.
SHUAI H J，ZHANG S，SONG J T，et al.Error corrections for position sensitive detector based on speckle tracking system[J].Infrared and Laser Engineering，2016，45(4):1-6. (in Chinese)
[21] 唐彦琴，顾国华，钱惟贤，等.四象限探测器基于高斯分布的激光光斑中心定位算法[J].红外与激光工程，2017，46(2):1-7.
TANG Y Q，GU G H，QIAN W X，et al.Four quadrant detector laser spot center location based on gauss distribution[J].Infrared and Laser Engineering，2017，46(2):1-7. (in Chinese)

第43卷第9期2022 年9月
兵工学报ACTA ARMAMENTARII
Vol.43No.9Sep.2022

[1]	周泉，姚敏立，沈晓卫. 基于支持度的椭球拟合微机械电子系统加速度计现场标定方法研究[J]. 兵工学报, 2020, 41(1): 68-74.
[2]	李典，侯海量，朱锡，陈长海，李茂. 破片群侵彻纤维增强层合板破坏机理及穿甲能力等效方法[J]. 兵工学报, 2018, 39(4): 707-716.
[3]	邢丽, 熊智, 刘建业, 杭义军. 基于对偶四元数的圆锥及划船误差补偿改进算法[J]. 兵工学报, 2017, 38(7): 1336-1347.
[4]	唐晨，张茂云，曹国华，丁红昌. 基于互相关的大型机组轴系激光对中微弱信号提取方法研究[J]. 兵工学报, 2017, 38(10): 2048-2054.
[5]	冯卡力，李安，覃方君，李峰. 光纤陀螺温度误差自适应神经模糊补偿方法[J]. 兵工学报, 2016, 37(4): 641-647.
[6]	胡德金. 大型球面精密磨削的球度判别与误差在位补偿方法研究[J]. 兵工学报, 2015, 36(6): 1082-1088.
[7]	张樨，李杰，范建英，陈伟，冯伟. 半捷联微惯性测量系统同轴度误差解析评定[J]. 兵工学报, 2015, 36(3): 503-509.
[8]	延皓, 李长春, 张金英. 基于外部坐标测量的六自由度并联机构标定方法[J]. 兵工学报, 2013, 34(5): 649-656.
[9]	何春燕, 李为民, 张建军, 黄田. 三轴立式加工中心几何误差补偿方法的研究[J]. 兵工学报, 2012, 33(12): 1516-1520.
[10]	吴志添，武元新，胡小平，吴美平. 基于总体最小二乘的捷联三轴磁力仪标定与地磁场测量误差补偿[J]. 兵工学报, 2012, 33(10): 1202-1209.
[11]	黄学功，王炅. 地磁信号检测系统误差分析与补偿方法研究[J]. 兵工学报, 2011, 32(1): 33-36.
[12]	张辽远，宫毅超，刘玉梅. 微位移机构误差补偿技术研究[J]. 兵工学报, 2008, 29(8): 970-973.
[13]	曹国华，徐洪吉，苏成志. 大气湍流对激光校准轴系的影响[J]. 兵工学报, 2005, 26(3): 327-329.