基于互相关的大型机组轴系激光对中微弱信号提取方法研究

doi:10.3969/j.issn.1000-1093.2017.10.022

兵工学报 ›› 2017, Vol. 38 ›› Issue (10): 2048-2054.doi: 10.3969/j.issn.1000-1093.2017.10.022

基于互相关的大型机组轴系激光对中微弱信号提取方法研究

唐晨，张茂云，曹国华，丁红昌

(长春理工大学机电工程学院, 吉林长春 130022)

收稿日期:2017-05-02 修回日期:2017-05-02 上线日期:2017-11-22
通讯作者: 曹国华（1965—），男，教授，博士生导师 E-mail:caoguohua@cust.edu.cn
作者简介:唐晨(1986—)，女，讲师。E-mail: tangchen@cust.edu.cn
基金资助:
吉林省科技发展计划项目(20100365)；兵器科技研究项目（62201040504-A）

Study of Cross-correlation Algorithm-based Weak Signal Extraction Method for Laser Alignment of Large Unit

TANG Chen， ZHANG Mao-yun， CAO Guo-hua， DING Hong-chang

(College of Mechanical and Electric Engineering, Changchun University of Science and Technology, Changchun 130022, Jilin, China)

Received:2017-05-02 Revised:2017-05-02 Online:2017-11-22

摘要/Abstract

摘要： 为提高自主研发的大型机组轴系激光对中仪的对中精度，减少由位置检测单元（PSD）受杂散光干扰引起的误差，提出一种基于互相关算法的微弱信号提取方法。建立基于互相关算法的数学模型，并设计模拟电路，实现了大型机组轴系激光对中仪的位置误差补偿；搭建实验测试系统获取PSD坐标数据，使用二维精密微位移平台进行重复性实验验证，对测量数据进行分析。实验结果表明，该方法可以在自然光照条件下保证设备的精度，分辨力在0.005 mm内，可以有效地提高大型机组轴系激光对中仪对外界噪声的抗干扰性能。

关键词: 仪器仪表技术, 激光对中仪, 互相关, 微弱信号提取, 误差补偿

Abstract: To improve the laser alignment accuracy of a large unit shafting and reduce the errors caused by position sensitive detector (PSD) that is easily interfered by stray light, a weak signal detection algorithm based on cross-correlation algorithm is proposed, the specific mathematical models are established, and the circuits are designed. The position error compensation of laser alignment instrument for large unit shafting is achieved using the mathematical model of cross-correlation algorithm and circuit. To obtain the data of PSD, a 2-D micro-displacement platform was built to test the system. The repeatability tests were completed using the micro-displacement platform, then the measured data was analyzed. The results indicate that the proposed method can ensure the alignment accuracy of the equipment with the resolution of 0.005 mm, and the anti-noise performance of large unit shafting laser alignment instrument can be effectively improved. Key

Key words: apparatusandintrumentstechnology, laseralignmentinstrument, cross-correlation, weaksignaldetection, errorcompensation

中图分类号:

TH741.4

唐晨，张茂云，曹国华，丁红昌. 基于互相关的大型机组轴系激光对中微弱信号提取方法研究[J]. 兵工学报, 2017, 38(10): 2048-2054.

TANG Chen， ZHANG Mao-yun， CAO Guo-hua， DING Hong-chang. Study of Cross-correlation Algorithm-based Weak Signal Extraction Method for Laser Alignment of Large Unit[J]. Acta Armamentarii, 2017, 38(10): 2048-2054.

参考文献

［1］曹国华, 苏成志, 徐洪吉. 基于位置敏感探测器和激光技术对大型轴系中心线检测方法的研究［J］. 兵工学报, 2006, 27(4): 765-768.
CAO Guo-hua, SU Cheng-zhi, XU Hong-ji. Study on aligning and detecting of large shaft center-line with PSD and laser technology［J］. Acta Armamentarii, 2006, 27(4):765-768.(in Chinese)
［2］高艺, 徐成宇, 曹国华. 基于仿生光电N点成像理论的大型机组轴系对中在线检测误差模型［J］. 吉林大学学报:工学版, 2014, 44(3):692-695.
GAO Yi, XU Cheng-yu, CAO Guo-hua. Study on correction model of aligning large-scale machine set to its center based on bionic imaging theory with photoelectric multipoint［J］. Journal of Jilin University:Engineering and Technology Edition, 2014, 44(3):692-695.(in Chinese)
［3］ Lang Y, Zheng D, Lv X Y. Study on the angle measurement of laser shaft alignment instrument［J］. Advanced Materials Research, 2014, 3043(898): 644-647.
［4］ David R N, Luis L G J, Ignacio B M, et al. Analysis and calibration of sources of electronic error in PSD sensor response［J］. Sensors, 2016, 16(5):619-649.
［5］闫涛, 沈文亮, 姬冰. 基于双通道互相关的微弱信号检测及测向方法［J］. 无线电工程, 2016, 46(11):75-78.
YAN Tao, SHEN Wen-liang, JI Bing. Study of weak signal detection and direction finding based on dual-channel cross-correlation［J］. Radio Engineering, 2016, 46(11):75-78.(in Chinese)
［6］赵芳. 混沌理论和神经网络的激光测距机弱信号检测［J］. 激光杂志, 2016, 37(1):74-77.
ZHAO Fang. Weak signal detection of laser range finder with chaos theory and neural network［J］. Laser Journal, 2016, 37(1):74-77.(in Chinese)
［7］ Boschi L, Weemstra C. Stationary-phase integrals in the cross correlation of ambient noise［J］. Reviews of Geophysics, 2015, 53(2): 411-451.
［8］ Lin T K, Fajri H. Damage detection of structures with detrended fluctuation and detrended cross-correlation analyses［J］. Smart Materials and Structures, 2017, 26(3):77-88.
［9］王森, 宫玉琳, 王春阳, 等. MATLAB加窗滤波在广义互相关时延估计中的应用［J］. 长春理工大学学报:自然科学版, 2016, 39(6):48-52.
WANG Sen, GONG Yu-lin, WANG Chun-yang, et al. Application of MATLAB windowing and filtering in generalized cross-correlation time delay estimation［J］. Journal of Changchun University of Science and Technology:Natural Scienc Edition, 2016, 39(6):48-52.(in Chinese)

［10］高焕泽. 激光互相关测距系统研究［D］. 西安:西安工业大学, 2015.
GAO huan-ze. The research of laser ranging system based on cross-correlation theory［D］. Xi'an:Xi'an Technological University, 2015.(in Chinese)

第38卷第10期2017 年10月兵工学报ACTA
ARMAMENTARIIVol.38No.10Oct. 2017

[1]	周泉，姚敏立，沈晓卫. 基于支持度的椭球拟合微机械电子系统加速度计现场标定方法研究[J]. 兵工学报, 2020, 41(1): 68-74.
[2]	邢丽, 熊智, 刘建业, 杭义军. 基于对偶四元数的圆锥及划船误差补偿改进算法[J]. 兵工学报, 2017, 38(7): 1336-1347.
[3]	陈显舟，杨旭，陈周，白琳，方海. 双基地多输入多输出雷达收发四维角联合估计[J]. 兵工学报, 2017, 38(5): 917-923.
[4]	杨丽君，田洪刚，安立明，温银堂，罗小元. 基于同面电容成像的航天隔热复合材料粘接缺陷检测方法[J]. 兵工学报, 2017, 38(12): 2488-2496.
[5]	冯卡力，李安，覃方君，李峰. 光纤陀螺温度误差自适应神经模糊补偿方法[J]. 兵工学报, 2016, 37(4): 641-647.
[6]	杨庆涛，王辉，朱新新，周平. 无水冷条件下温度与热流复合传感器设计与试验[J]. 兵工学报, 2016, 37(2): 193-202.
[7]	郝晓剑，桑涛，潘保武，周汉昌. 钽-氧化锆光纤黑体腔温度传感器特性参数测试[J]. 兵工学报, 2016, 37(2): 373-378.
[8]	安喆，徐熙平，乔杨，张宁，吕耀文. 基于复色共焦的透明材料厚度测量数据处理方法研究[J]. 兵工学报, 2016, 37(10): 1964-1968.
[9]	高红俐，刘欢，齐子诚，刘辉，郑欢斌. 基于高速数字图像相关法的疲劳裂纹尖端位移应变场变化规律研究[J]. 兵工学报, 2015, 36(9): 1772-1781.
[10]	胡德金. 大型球面精密磨削的球度判别与误差在位补偿方法研究[J]. 兵工学报, 2015, 36(6): 1082-1088.
[11]	潘越，徐煕平，张帆，姜肇国，乔杨，李艳荻. 图像处理前照灯检测仪校准器自动检定系统[J]. 兵工学报, 2015, 36(5): 861-868.
[12]	张樨，李杰，范建英，陈伟，冯伟. 半捷联微惯性测量系统同轴度误差解析评定[J]. 兵工学报, 2015, 36(3): 503-509.
[13]	孟立新，赵丁选，张立中，姜会林，李小明. 机载激光通信稳瞄吊舱设计与跟踪精度测试[J]. 兵工学报, 2015, 36(10): 1916-1923.
[14]	刘志浩, 高钦和, 牛海龙, 管文良, 李璟玥. 基于驱动端电流检测的电磁阀故障诊断研究[J]. 兵工学报, 2014, 35(7): 1083-1090.
[15]	王会峰，王晓艳，王炳健，关丽敏，汪贵平. 基于视觉序列图像分析的药室参数测量[J]. 兵工学报, 2014, 35(6): 782-788.

基于互相关的大型机组轴系激光对中微弱信号提取方法研究

Study of Cross-correlation Algorithm-based Weak Signal Extraction Method for Laser Alignment of Large Unit

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价