Research on Effect of Al on Curing Property of GAP Spherical Propellant by Rheological Isothemal Measuring Method

doi:10.3969/j.issn.1000-1093.2016.06.008

Abstract

Abstract: In order to study the effect of Al on the curing process of glycidyl azide polymer (GAP) spherical propellant, the curing kinetics of GAP spherical propellant is studied by rheotogical isothermal measurement. Cuing parameters are obtained through Sestak-Berggren model, and the curing models of GAP spherical propellants with 0% Al and 10% Al are established. The results show that the apparent activation energy of GAP spherical propellant during cuing is less changed in the range of 0

Key words: ordnance science and technology, rheometer, glycidyl azide polymer, spherical propellant, curing kinetics, Al

CLC Number:

V512⁺.3

HE Wei, HE Li-ming, MA Zhong-liang, XIAO Zhong-liang, GUO Yan-li. Research on Effect of Al on Curing Property of GAP Spherical Propellant by Rheological Isothemal Measuring Method[J]. Acta Armamentarii, 2016, 37(6): 1023-1029.

References

［1］张海燕.改性双基低特征信号推进剂研究进展[J].固体火箭技术,2000,23(2):36-38.
ZHANG Hai-yan. Advances in low signature signal CMDB propellants[J].Journal of Solid Rocket Technology,2000, 23(2):36-38.(in Chinese)
[2］石小兵,庞维强,蔚红建. 钝感推进剂研究进展及发展趋势[J].化学推进剂与高分子材料,2007,5（2）:24-28,32.
SHI Xiao-bing, PANG Wei-qiang, WEI Hong-jian.Research progress and development trends of insensitive propellant[J].Chemical Propellants and Polymeric Materials,2007,5（2）:24-28,32.(in Chinese)
[3］何利明,何伟,罗运军,等.几种钝感含能增塑剂之间的相容性[J].固体火箭技术,2015,38(4):523-527.
HE Li-ming，HE Wei，LUO Yun-jun， et al. Compatibility of some insensitive energetic plasticisers with each other[J]. Journal of Solid Rocket Technology,2015,38(4):523-527.(in Chinese)
[4］ Wu Y, Luo Y, Ge Z. Properties and application of a novel type of glycidyl azide polymer (GAP)-modified nitrocellulose powders[J]. Propellants, Explosives, Pyrotechnics, 2015, 40(1): 67-73.
[5］ Tang C J, Lee Y, Litzinger T A. Simultaneous temperature and species measurements of the glycidyl azide polymer (GAP) propellant during laser-induced decomposition[J]. Combustion and Flame, 1999, 117(1): 244-256.
[6］ Hu C, Guo X, Jing Y, et al. Structure and mechanical properties of crosslinked glycidyl azide polymers via click chemistry as potential binder of solid propellant[J]. Journal of Applied Polymer Science, 2014, 131(16):318-323.
[7］ Niehaus M. Compounding of glycidyl azide polymer with nitrocellulose and its influence on the properties of propellants[J]. Propellants, Explosives, Pyrotechnics, 2000, 25(5): 236-240.
[8］吴艳光, 罗运军, 葛震. GAP 改性单基球形药的热分解性能研究[J]. 北京理工大学学报, 2013, 33(6): 653-656.
WU Yan-guang,LUO Yun-jun,GE Zhen. An investigation on the thermal decomposition properties of GAP modified single base special powder[J].Transactions of Beijing Institute Technology,2013,33(6):653-656.(in Chinese)
[9］ Wu Y, Ge Z, Luo Y. Properties and application of a novel type of glycidyl azide polymer modified double-base spherical powders[J]. Journal of Thermal Analysis and Calorimetry, 2016,124(1): 107-115.
[10］张在娟,罗运军,李国平.变温红外光谱法研究GAP与三种异氰酸酯的反应动力学[J].含能材料,2014,22(3):382-385.
ZHANG Zai-juan，LUO Yun-jun，LI Guo-ping.Reaction kinetics of GAP and three kinds of isocyanates with variable temperature FTIR spectrum method[J].Chinese Journal of Energetic Materials,2014,22(3):382-385.(in Chinese)
[11］ Manu S K, Sekkar V, Scariah K J, et al. Kinetics of glycidyl azide polymer-based urethane network formation[J]. Journal of Applied Polymer Science, 2008, 110(2): 908-914.
[12］ Lucio B, de la Fuente J L. Rheokinetic analysis on the formation of metallo-polyurethanes based on hydroxyl-terminated polybutadiene[J]. European Polymer Journal, 2014, 50(1): 117-126.
[13］ Hardis R, Jessop J L P, Peters F E, et al. Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA[J]. Composites Part A: Applied Science and Manufacturing, 2013, 49(1): 100-108.
[14］ Garschke C, Parlevliet P P, Weimer C, et al. Cure kinetics and viscosity modelling of a high-performance epoxy resin film[J]. Polymer Testing, 2013, 32(1): 150-157.
[15］ Ruiz E, Trochu F. Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts[J]. Composites Part A: Applied Science and Manufacturing, 2005, 36(6): 806-826.
[16］ Rahier H, Van Mele B, Wastiels J. Low-temperature synthesized aluminosilicate glasses. Part II rheological transformations during low-temperature cure and high-temperature properties of a model compound[J]. Journal of Materials Science, 1996, 31(1): 80-85.
[17］ Follensbee R A, Koutsky J A, Christiansen A W, et al. Development of dynamic mechanical methods to characterize the cure state of phenolic resole resins[J]. Journal of Applied Polymer Science, 1993, 47(8): 1481-1496.
[18］ Sudha J D, Pradhan S, Viswanath H, et al. Studies on the cure parameters of cyanate ester-epoxy blend system through rheological property measurements[J]. Journal of Thermal Analysis and Calorimetry, 2014, 115(1): 743-750.
[19］ Canamero-Martinez P, Fernandez-Garcia M, De la Fuente J L. Rheological cure characterization of a polyfunctional epoxy acrylic resin[J]. Reactive and Functional Polymers, 2010, 70(10): 761-766.
[20］ Reghunadhan Nair C P, Ninan K N. Rheological cure characterization of phosphazene-triazine polymers[J]. Journal of Applied Polymer Science, 2003, 88(4): 908-914.
[21］ Akhlaghi S, Kalaee M, Jowdar E, et al. Simultaneous study of cure kinetics and rheology of montmorillonite/vinyl ester resin nanocomposites[J]. Polymers for Advanced Technologies, 2012, 23(3): 534-544.
[22］ He W, He L M, Ma Z L,Guo Y L.Using rheometry to study the curing kinetics of glycidyl azide polymers spherical propellant by non-isothernal method[J]. Rheologica Acta, 2016, 55(5): 365-371.
[23］刘晶如, 罗运军. 非等温 DSC 研究 Al/HTPB/TDI 体系的固化反应动力学[J]. 含能材料, 2009, 17(1): 83-86.
LIU Jing-ru, LUO Yun-jun.Curing Kinetics of HTPB/TDI/Al system by non-isothermal DSC[J].Chinese Journal of Energetic Materials,2009,17(1):83-86.(in Chinese)
[24］ Madbouly S A, Otaigbe J U. Kinetic analysis of fractal gel formation in waterborne polyurethane dispersions undergoing high deformation flows[J]. Macromolecules, 2006, 39(12): 4144-4151.
[25］ Abenojar J, Encinas N, del Real J C, et al. Polymerization kinetics of boron carbide/epoxy composites[J]. Thermochimica Acta, 2014, 575(1): 144-150.
[26］ Jankovic B. The kinetic analysis of isothermal curing reaction of an unsaturated polyester resin: estimation of the density distribution function of the apparent activation energy[J]. Chemical Engineering Journal, 2010, 162(1): 331-340.
[27］王薇薇,王瑞,刘靖,等.端羟基聚丁二烯改性氰酸酯体系固化反应动力学[J].热固性树脂,2011,26(5) 21-24.
WANG Wei-wei，WANG Rui，LIU Jing，et al.Curing kinetics of hydroxyl-terminated polybutadiene modified cyanate ester resin[J].Thermosetting Resin,2011,26(5) 21-24.(in Chinese)
[28］ Hagen T H, Jensen T L, Unneberg E, et al. Curing of glycidyl azide Polymer (GAP) diol using isocyanate, isocyanate-free, synchronous dual, and sequential dual curing systems[J]. Propellants, Explosives, Pyrotechnics, 2015, 40(2): 275-284.
[29］ Málek J, Mitsuhashi T, Criado J M. Kinetic analysis of solid-state processes[J]. Journal of Materials Research, 2001, 16(6): 1862-1871.
[30］ He W, He L M, Ma Z L, et al. The kinetic and viscosity analysis of glycidyl azide polymer spherical propellant[J]. Journal of Thermal Analysis and Calorimetry,2016, 124(2): 943-950.

[1]	LIN Sen, WANG Jingang, GAO Hongwei. Battlefield Image Dehazing Based on Global Compensation Attention Mechanism [J]. Acta Armamentarii, 2024, 45(4): 1344-1353.
[2]	ZHANG Cheng， ZHANG Yuqi, WEN Xiangli, BAI Pengpeng, MENG Yonggang, MA Liran, TIAN Yu. High-temperature Oxidation Behavior of Barrel Materials [J]. Acta Armamentarii, 2024, 45(4): 1354-1362.
[3]	LI Shiquan, ZHU Wenchao, SUN Fangping, WANG Yuhui, WANG Jianping. Effect of Particle Injection Velocity on Aluminum Powder/air Two-phase Rotating Detonation Waves [J]. Acta Armamentarii, 2024, 45(4): 1148-1157.
[4]	ZHANG He, HUANG Yi, LIU Keyan, LI Pengchao, GU Tongguang, WANG Yongjuan, XU Cheng. Research on the Influence of Salt Spray Environment on the Movement of Typical Rifle Automaton [J]. Acta Armamentarii, 2024, 45(4): 1082-1093.
[5]	LIANG Yuan, QI Guoqing, CHEN Ye, LI Yinya, SHENG Andong. Event-triggered Surface Extended Target Tracking with Intermittent Measurements [J]. Acta Armamentarii, 2024, 45(4): 1219-1228.
[6]	TIAN Feng, MIAO Long, LIANG Fuwen, SONG Jiahui, HE Zihao, WU Zhiwen, WANG Ningfei. Research on Two-dimensional Simulation Model of Discharge Instability of Hollow Cathode Plume Plasma [J]. Acta Armamentarii, 2024, 45(4): 1208-1218.
[7]	YU Jintao, XIAO Bing, CUI Yuzhu, QI Dong, YAN Tao. Mission Support Capability Assessment of Early-warning Combat System-of-systems Based on Temporal Network Simulation andContribution Rate [J]. Acta Armamentarii, 2024, 45(4): 1237-1251.
[8]	ZHAI Sikuan, LIU Jianhua, ZHUANG Cunbo. Knowledge-based Rapid Preparation Method for Complex Product Assembly Process [J]. Acta Armamentarii, 2024, 45(4): 1332-1343.
[9]	LIU Zhifeng, ZHANG Xue, LI Ping, ZHANG Jihao, LI Siqi, WANG Weidong, GONG Peng. Research on the Transmission Scheme of Multi-aircraft Network Based on D2D Communication and Virtual MIMO [J]. Acta Armamentarii, 2024, 45(4): 1141-1147.
[10]	WANG Yiming, WANG Hengdi, CUI Yongcun, LI Chang, DENG Sier. Thermal Characteristics of Large Span Double Row Tapered Roller Bearing [J]. Acta Armamentarii, 2024, 45(4): 1285-1296.
[11]	PAN Zuodong, ZHOU Yue , GUO Wei, XU Gaofei, SUN Yu. Path Planning of Tidal Flat Tracked Vehicle Based on CB-RRT^* Algorithm [J]. Acta Armamentarii, 2024, 45(4): 1117-1128.
[12]	CHEN Guiming, XU Lingliang. Ultra-local Model-free Current Predictive Control of Permanent Magnet Synchronous Motor Based on Nonlinear DisturbanceCompensation [J]. Acta Armamentarii, 2024, 45(4): 1129-1140.
[13]	ZHAO Wei, ZHUO Zhihai, ZHANG Yuexia. Application of Two-parameter Threshold Function Based on Energy Thresholds in Denoising of Physiological Signal [J]. Acta Armamentarii, 2024, 45(4): 1264-1272.
[14]	YANG Haowei, GONG Peng, ZHANG Jihao, WANG Weidong, TANG Feixi, ZHOU Zijiao, ZHANG Guangwei. Design and Implementation of Information Interactive Interface between QualNet and Virtual Machine for Link16 [J]. Acta Armamentarii, 2024, 45(4): 1186-1195.
[15]	WU Gang, XIAO Jing, XIE Linshen. Loss and Distortion Characteristics of Large Two-plate Guided-wave Antennas for Transmitting Nuclear Electromagnetic Pulse [J]. Acta Armamentarii, 2024, 45(4): 1311-1320.