Experimental Research on Dynamic Concentration Distribution of FAE Solid Fuel

doi:10.3969/j.issn.1000-1093.2016.02.005

Abstract

Abstract: The appropriate concentration of fuel cloud is a precondition of the detonation reaction. Because of the complex mechanism of the dispersing process and the lack of the testing devices, the special experimental research on the dynamic concentration distribution of fuel is still very lack. An array experimental system based on the concentration measurement microsystem CMM-1 is established to detect the concentration of the fuel cloud generated by a scaled-down dispersing device; the temporal and spatial variation curves of the fuel concentration are obtained, and the change law of the concentration peak is established. The experimental results show that the dynamic concentration distribution of fuel can be obtained using the experiment system and the proposed method.

Key words: ordnance science and technology, fuel air explosive, concentration, distribution, measurement

CLC Number:

TJ01

GUO Ming-ru, LOU Wen-zhong, JIN Xin, DAI Xi-ming. Experimental Research on Dynamic Concentration Distribution of FAE Solid Fuel[J]. Acta Armamentarii, 2016, 37(2): 226-231.

References

［1］惠君明. FAE燃料抛撒与云雾状态的控制［J］.火炸药学报, 1999,22(1):10-14.
HUI Jun-ming. FAE fuel throw and control of cloud state ［J］. Chinese Journal of Explosive and Propellants, 1999,22(1): 10-14. (in Chinese)
［2］ Zabelka R J, Smith L H. Explosively dispersed liquids, AD-863268［R］. China Lake, CA:Naval Weapons Center, 1969.
［3］ Gardner D R. Near-field dispersal modeling for liquid fuel-air-explosives, SAND90-0686［R］. New Mexico, US:Sandia National Laboratories, 1990.
［4］ Glass M W. Far-field dispersal modeling for liquid fuel-air-explosives, SAND90-0687［R］. New Mexico, US:Sandia National Laboratories, 1991.
［5］席志德, 解立峰, 刘家骢, 等. 高速运动液体燃料爆炸抛撒模型的建立［J］. 弹道学报, 2004, 16(2):80-85.
XI Zhi-de, XIE Li-feng, LIU Jia-cong, et al. The model for process of explosive dispersal of high speed fuel［J］. Journal of Ballistics, 2004, 16(2):80-85. (in Chinese)
［6］於津, 彭金华, 张陶, 等. 基于量纲分析的FAE爆炸场云雾膨胀半径的计算［J］. 弹箭与制导学报, 2004, 24(4):143-144.
YU Jin, PENG Jin-hua, ZHANG Tao, et al. Formula fitting to cloud radius calculation of FAE warhead with dimension analytic technique［J］. Journal of Projectiles, Rockets, Missiles and Guidance, 2004, 24(4):143-144. (in Chinese)
［7］陈嘉琛, 张奇, 马秋菊, 等. 固体和液体混合燃料抛撒过程数值模拟［J］. 兵工学报, 2014, 35(7):972-976.
CHEN Jia-chen，ZHANG Qi，MA Qiu-ju, et al. Numerical simulation of dispersal process of solid-liquid mixed fuel ［J］. Acta Armamentarii, 2014, 35(7):972-976.(in Chinese)
［8］丁珏, 刘家骢. 液体燃料爆炸抛撒和FAE形成过程的数值模拟［J］. 南京理工大学学报, 2000, 24(2):168-171.
DING Jue, LIU Jia-cong. Numerical simulation on the process of explosive dispersal for forming FAE cloud［J］. Journal of Nanjing University of Science and Technology，2000，24(2):168-171. (in Chinese)
［9］薛社生, 刘家骢, 秦承森, 等. 燃料爆炸抛撒成雾的实验与数值研究［J］. 爆炸与冲击, 2001, 21(4):272-276.
XUE She-sheng, LIU Jia-cong, QIN Cheng-sen, et al. Experimental and numerical investigation on explosive dispersal and cloud forming ［J］. Explosion and Shock Waves, 2001, 21(4):272-276.(in Chinese)
［10］张奇, 白春华, 刘庆明, 等. 一次引爆型燃料空气炸药装置结构的实验研究［J］. 兵工学报, 2001, 22(4):560-562.
ZHANG Qi, BAI Chun-hua, LIU Qing-ming, et al. Experimental investigation of explosion effects of fuel air explosive by various device structures［J］. Acta Armamentarii, 2001, 22(4):560-562.(in Chinese)
［11］张奇，覃斌，白春华, 等.中心装药对FAE燃料成雾特性影响的试验分析［J］. 含能材料, 2007, 15(5):447-450.
ZHANG Qi, QIN Bin, BAI Chun-hua, et al. Effect of total energy of center explosive charge on fuel dispersal characteristic feature［J］. Chinese Journal of Energetic Materials, 2007, 15(5):447-450.(in Chinese)
［12］郭学永, 惠君明. 装置参数对FAE云雾状态的影响［J］.含能材料，2002,10(4):161-164.
GUO Xue-yong, HUI Jun-ming. Influence of equipment parameters on FAE cloud status ［J］. Chinese Journal of Energetic Materials, 2002, 10(4):161-164. (in Chinese)
［13］ Guo M R, Lou W Z, Liu Y K, et al. Ultrasonic attenuation of high concentration of micro particle clouds［J］. Key Engineering Materials, 2013, 562/563/564/565:1538-1541.

[1]	LIANG Yuan, QI Guoqing, CHEN Ye, LI Yinya, SHENG Andong. Event-triggered Surface Extended Target Tracking with Intermittent Measurements [J]. Acta Armamentarii, 2024, 45(4): 1219-1228.
[2]	WANG Zherui, WANG Yan, WANG Yilin, LIANG Guolong. Multi-dimensional Parameter Estimation of Non-cooperative Underwater Acoustic Frequency-hopping Signal Based on Time-frequency Acoustic Intensity Method of Single Vector Hydrophone [J]. Acta Armamentarii, 2024, 45(2): 454-465.
[3]	NING Keyan, ZENG Qiang, TIAN Jinshan, ZHAO Pan, LAN Hai, HE Jiafu, WAN Li. A Spring Function-sensing Conformal Displacement Measuring Device and Method for High Temperature Application [J]. Acta Armamentarii, 2024, 45(2): 662-670.
[4]	LIU Haobang, SHI Xianming, ZHAO Mei, ZHANG Jianjun. Bayesian Estimation of Surface-to-Air Missile Hit Probability Based on Normal-inverse Wishart Distribution [J]. Acta Armamentarii, 2024, 45(1): 339-348.
[5]	HUANG Xuanning, LI Weibing, LI Wenbin, YIN Guixiang, GUO Tengfei. Experimental Research on the Characteristics of Behind-armor Debris from Explosively Formed Projectile Penetrating Targets of Different Materials [J]. Acta Armamentarii, 2024, 45(1): 58-68.
[6]	DENG Tingxiang, REN Peng, CHENG Jia, WANG Jianbing, LIANG Zhenjie, XIANG Zheng. Relative Positioning Technology for Two Points Based on Cluster Cooperative Orientation [J]. Acta Armamentarii, 2023, 44(S2): 22-34.
[7]	WU Liyang, GUO Pengcheng, LIU Chao, LI Wenqiang. Radar Signal Modulation Type Recognition Based on Attention Mechanism Enhanced Residual Networks [J]. Acta Armamentarii, 2023, 44(8): 2310-2318.
[8]	YANG Hongtao, LU Zhihui, SUN Haozhi, WU Yiyong, LIU Min, LAI Yanbo. Collaborative Proportional Method for Measuring Triaxial Moment of Inertia Based on Vibration Compound Pendulum and Torsion Pendulum [J]. Acta Armamentarii, 2023, 44(5): 1513-1520.
[9]	LI Jingfeng, CHEN Yunxiang, XIANG Huachun, GAO Yangjun, ZHAO Jing. Multi-Objective Spare Parts Scheduling Method in Wartime Considering Lateral Transshipment and Emergency Distribution [J]. Acta Armamentarii, 2023, 44(3): 816-830.
[10]	ZENG Zihao, ZHANG Jingdong, GONG Xuelian, LIU Kunming, GUI Xuewen, LIAO Ridong. Strength Calculation Method of Double-Pin Track Shoes Under Tensile Load [J]. Acta Armamentarii, 2023, 44(3): 831-840.
[11]	LI Kai, ZHOU Shichao, WEN Peng, SUN Jiangang, GONG Qingqing, LI Yuan, HAN Yan. Magnetic Scattering-Based Detection Technology for Inner Surface Wear of Rifled Gun [J]. Acta Armamentarii, 2023, 44(3): 748-756.
[12]	LI Siyu, DONG Xiaofen, WANG Yunpeng, LI Shuai, WANG Duan, WANG Qinghua. Study on Preparation and Properties of TiW/Ni/Au Exploding Foil [J]. Acta Armamentarii, 2023, 44(12): 3826-3835.
[13]	DU Liangliang, QIAN Weixin, LIU Shouxian, ZHAO Yu, LI Shengfu, ZHAI Zhaohui, CHANG Lihua, ZHU Yu, WENG Jidong, WU Jian, LI Jun, ZHU Liguo. Research Progress of Transient Photoelectric Measurement Technology for Shock Wave and Detonation Physics Experiments [J]. Acta Armamentarii, 2023, 44(12): 3622-3640.
[14]	LIU Haobang, SHI Xianming, HAO Bing, JIANG Yongchao. Estimation of Ammunition Hit Probability in Multiple-Batch Tests Using Multinomial Distribution [J]. Acta Armamentarii, 2023, 44(10): 3156-3164.
[15]	KE Zhifang, WEI Wei, LIU Cheng, GUO Meng, ZHANG Jiahua, YAN Qingdong. Inverse Design Method for Impeller Capacity Optimization of Hydrodynamic Torque Converter [J]. Acta Armamentarii, 2023, 44(1): 51-60.