Entropy Weight Fuzzy Comprehensive Evaluation on Failure Mode Criticality of Integrated Transmission System

doi:10.3969/j.issn.1000-1093.2013.11.006

Abstract

Abstract: An integrated transmission system is tested in relation to the completed structure of integrated transmission system, the less failure data and the lack of reasonable failure mode analysis method. All the failure data are recorded during test, and a entropy weight fuzzy comprehensive evaluation method is proposed to analyze the failure mode criticality, through which several fuzzy and qualitative indicators are evaluated. In consideration of failure probability, failure severity, difficulty in failure detection and maintenance level, an evaluation indicator for correction difficulty is proposed from the perspective of fulllife cycle, which improves the evaluation indicator system. The key failure modes and subsystems are discovered through criticality analysis, which provide valid evidence for modification, maintenance decision and life management of integrated transmission system.

Key words: ordnance science and technology, integrated transmission system, failure mode, entropy weight, fuzzy comprehensive evaluation

CLC Number:

U472.42

XU Bao-rong, LI Rong-li, WEI Huo-ming， CONG Hua， FENG Fu-zhou. Entropy Weight Fuzzy Comprehensive Evaluation on Failure Mode Criticality of Integrated Transmission System[J]. Acta Armamentarii, 2013, 34(11): 1380-1386.

References

[1] 闫清东，张连第，赵酼芹，等. 坦克构造与设计：上册[M]. 北京：北京理工大学出版社, 2006：160-176. YAN Qing-dong, ZHANG Lian-di, ZHAO Yu-qin, et al. Tank structure and design: volume one[M]. Beijing：Beijing Institute of Technology Press, 2006: 160-176. (in Chinese) [2] 贾志成，胡仲翔，申桂香，等. 数控机床故障模式的对比分析[J]. 兵工学报，2009，30(1)：88-89. JIA Zhi-cheng, HU Zhong-xiang, SHEN Gui-xiang, et al. Contrast offault mode analyses of CNC machine tools between the Chinese-built and the German[J]. Acta Armamentarii, 2009，30(1): 88-89. (in Chinese) [3] 石真真，刘更，吴立言. 计算机辅助故障模式、影响及危害性分析研究[J]. 机械与电子，2011，29(6)：11-15. SHI Zhen-zhen, LIU Geng, WU Li-yan. Research on computer assisted failure mode effect and criticality analysis[J]. Machinery & Electronics, 2011,29(6): 11-15. (in Chinese) [4] 王桂萍，贾亚洲，申桂香，等. 加工中心冷却系统故障模式危害性模糊评价分析[J]. 农业机械学报，2008，39(3)：171-174. WANG Gui-ping, JIA Ya-zhou, SHEN Gui-xiang, et al. Fuzzy evaluation analysis on cooling system failure mode criticality of machining center[J]. Transactions of the Chinese Society of Agricultural Machinery, 2008, 39(3): 171-174. (in Chinese) [5] 申桂香，高文礼，张英芝，等. 基于模糊综合评判的数控车床故障分析[J]. 制造技术与机床，2011，61(8)：31-35. SHEN Gui-xiang, GAO Wen-li, ZHANG Ying-zhi, et al. Failure analysis of NC machine tool based on fuzzy comprehensive evaluation[J]. Manufacturing Technology & Machine Tool, 2011, 61(8): 31-35. (in Chinese) [6] 李永华，兆文忠. 铁路货车故障模式危害性分析方法[J]. 中国铁道科学，2009，30(3)：103-107. LI Yong-hua, ZHAO Wen-zhong. Criticality analysis method for the failure mode effects of railway freight car[J]. China Railway Science, 2009, 30(3): 103-107. (in Chinese) [7] 薛文星，秦俊奇，贾长治，等. FMADM供输弹系统故障模式危害性分析[J]. 火力与指挥控制，2011，8(8)：153-155. XUE Wen-xing, QIN Jun-qi, JIA Chang-zhi, et al. Harmfulness analysis of trouble mode of feeding mechanism based on FMADM method[J]. Fire Control & Command Control, 2011, 8 (8): 153-155. (in Chinese) [8] 李常有，徐敏强. 基于改进的TOPSIS的设备重要度分析[J]. 振动与冲击，2009，28(6)：164-167. LI Chang-you, XU Min-qiang. Criticality analysis on equipment based on improved TOPSIS[J]. Journal of Vibration and Shock, 2009, 28(6): 164-167. (in Chinese) [9] 赵娟，刘琼荪. 一种基于模糊数中心的模糊数排序方法[J]. 模糊系统与数学，2008，22(2)：142-146. ZHAO Juan, LIU Qiong-sun. Ranking fuzzy numbers based on the centroids of fuzzy number[J]. Fuzzy Systems and Mathematics, 2008, 22(2): 142-146. (in Chinese) [10] 姜欣明，罗兴柏，张玉令，等. 基于梯形模糊综合分析法的弹药维修安全风险评估[J]. 数学的实践与认识，2011，41(21)：183-193. JIANG Xin-ming, LUO Xing-bai, ZHANG Yu-ling, et al. Research on ammunition maintenance safety risk assessment based on the trapezoidal fuzzy comprehensive analytical method[J]. Mathematics in Practice and Theory, 2011, 41(21): 183-193. (in Chinese)

[1]	WANG Jinguo, WANG Yabin, GUO Yurong, WANG Shuai, ZHAO Jianmin, MA Sasa. Research on Evaluation of Wartime Maintenance Equipment Supply Ability Based on CM-FCE-AHP [J]. Acta Armamentarii, 2024, 45(3): 1010-1024.
[2]	YANG Guangrui, WANG Wei, YANG Jianchao, WANG Jianhui, WANG Xing. Blast Resistance of Reinforced Concrete Slabs Strengthened with POZD Coated Corrugated Steel [J]. Acta Armamentarii, 2023, 44(5): 1374-1383.
[3]	DENG Ximin, TIAN Ze, WU Haijun, WANG Hao, HUANG Fenglei. Penetration Characteristics and Plate Failure Modes of Asymmetrically Shaped Projectiles Penetrating Thin Metal Targets [J]. Acta Armamentarii, 2023, 44(12): 3836-3850.
[4]	ZHAO Zehu, LI Xianglong, HU Qiwen, WANG Jianguo. Dynamic Mechanical Properties and Damage Constitutive Model of Copper-bearing Garnet-biotite Schist [J]. Acta Armamentarii, 2023, 44(12): 3805-3814.
[5]	MAO Ming, WANG Jian-bing. Research on Influence of Breakwater on Hydrodynamic Characterisitics of Displacement Amphibious Vehicles [J]. Acta Armamentarii, 2016, 37(9): 1553-1560.
[6]	GAO Jun-qiang, TANG Xia-qing, HUANG Xiang-yuan, CHENG Xu-wei. FEA Method for Analysis of SINS Error Caused by Vibration Isolation System [J]. Acta Armamentarii, 2016, 37(9): 1570-1577.
[7]	NI Yan-jie， CHENG Nian-kai, JIN Yong， YANG Chun-xia， LI Hai-yuan， LI Bao-ming. Numerical Simulation on Pressure Wave in a 30mm Electrothermal-chemical Gun [J]. Acta Armamentarii, 2016, 37(9): 1578-1584.
[8]	LU Ye, ZHOU Ke-dong, HE Lei, LI Jun-song, HUANG Xue-ying. Research on Influence of Muzzle Brake Efficiency on a New Large Caliber Machine Gun Based on Floating Principle [J]. Acta Armamentarii, 2016, 37(9): 1585-1591.
[9]	LIU Guo-qing， XU Cheng. The Study of Bullet-Barrel Matching Design Method of High Precision Sniper Rifle [J]. Acta Armamentarii, 2016, 37(9): 1592-1598.
[10]	LI Zhen-xiao， ZHANG Ya-zhou， NI Yan-Jie， LI Bao-ming. Analysis on the Influence of Turn-off Characteristics of Thyristor on Augmented Railgun [J]. Acta Armamentarii, 2016, 37(9): 1599-1605.
[11]	HU Ming, WANG Jiong, WU Xiao-lang. Estimation Method for Storage Life of Magnetorheological Fluid Fuze Arming Device [J]. Acta Armamentarii, 2016, 37(9): 1606-1611.
[12]	ZHOU Peng， CAO Cong-yong， DONG Hao. Analysis of Interior Ballistic Characteristics and Muzzle Flow Field of High-pressure Gas Launcher [J]. Acta Armamentarii, 2016, 37(9): 1612-1616.
[13]	ZHAO Xue-wei， YU Yong-gang， MANG Shan-shan. Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet [J]. Acta Armamentarii, 2016, 37(9): 1617-1623.
[14]	LIN Xiang-yang, LI Han, ZHENG Wen-fang, PAN Ren-ming. Formation Mechanism of Pore Structure of Ball Propellant with Micro-pores Made by Double Emulsion Method [J]. Acta Armamentarii, 2016, 37(9): 1633-1638.
[15]	CUI Yun-xiao, CHEN Peng-wan, David A. Cendón, DAI Kai-da, ZHONG Fang-ping. Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model [J]. Acta Armamentarii, 2016, 37(9): 1639-1645.