[1] 王宗炼, 任会兰, 宁建国. 基于小波变换的混凝土压缩损伤模式识别[J]. 兵工学报, 2017, 38(9):1745-1753. WANG Z L, REN H L, NING J G. Identification of damage modes of concrete under compressive loading based on wavelet transform[J]. Acta Armamentarii, 2017,38(9):1745-1753.(in Chiniese) [2] SMEDT DE M, DE WILDER K, VERSTRYNGE E, et al. Experimental analysis of monotonic and cyclic pull-out of steel fibres by means of acoustic emission and X-ray microfocus computed tomography[J]. Proceedings, 2018, 2(8): 1-6. [3] FARHIDZADEH A, MPALASKAS A C, MATIKAS T E, et al. Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features[J]. Construction and Building Materials, 2014, 67(Part B):129-138. [4] OHTSU M. Simplified moment tensor analysis and unified decomposition of acoustic emission source:application to in situ hydrofracturing test[J]. Journal of Geophysical Research B, 1991, 96(B4):1187-1189. [5] OHNO K, UJI K, UENO A, et al. Fracture process zone in notched concrete beam under three-point bending by acoustic emission[J]. Construction & Building Materials, 2014, 67(Part B):139-145. [6] LIU J P, LI Y H, XU S D, et al. Cracking mechanisms in granite rocks subjected to uniaxial compression by moment tensor analysis of acoustic emission[J]. Theoretical and Applied Fracture Mechanics, 2015, 75:151-159. [7] 任会兰, 宁建国, 宋水舟, 等. 基于声发射矩张量分析混凝土破坏的裂纹运动[J]. 力学学报, 2019, 51(6):1830-1840. REN H L, NING J G, SONG S Z, et al. Investigation on crack growth in concrete by moment tensor analysis of acoustic emission[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(6): 1830-1740.(in Chinese) [8] PREM P R, MURTHY A R, VERMA M. Theoretical modelling and acoustic emission monitoring of RC beams strengthened with UHPC[J]. Construction and Building Materials, 2018, 158: 670-682. [9] LACIDOGNA G, PIANA G, CARPINTERI A. Damage monitoring of three point bending concrete specimens by acoustic emission and resonant frequency analysis[J]. Engineering Fracture Mechanics, 2019, 210: 203-211. [10] HAN Q, YANG G, XU J, et al. Acoustic emission data analyses based on crumb rubber concrete beam bending tests[J]. Engineering Fracture Mechanics, 2019, 210: 189-202. [11] LI B, XU L H, SHI Y C, et al. Effects of fiber type, volume fraction and aspect ratio on the flexural and acoustic emission behaviors of steel fiber reinforced concrete[J]. Construction and Building Materials, 2018, 180:474-486. [12] LI B, XU L H, CHI Y, et al. Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression[J]. Construction and Building Materials, 2017, 140:109-118. [13] BANJARA N K, SASMAL S, SRINIVAS V. Investigations on acoustic emission parameters during damage progression in shear deficient and GFRP strengthened reinforced concrete components[J]. Measurement, 2019, 137: 501-514. [14] OHNO K, OHTSU M. Crack classification in concrete based on acoustic emission[J]. Construction & Building Materials, 2010, 24(12):2339-2346. [15] RASHEED M A, PRAKASH S S, RAJU G, et al. Fracture studies on synthetic fiber reinforced cellular concrete using acoustic emission technique[J]. Construction and Building Materials, 2018, 169:100-112. [16] RASHEED M A, PRAKASH S S, GANGADHARAN R. Acoustic emission characterization of hybrid fiber reinforced cellular concrete under direct shear loads[J]. Journal of Nondestructive Evaluation, 2019, 38(1):1-14. [17] PREM P R, MURTHY A R. Acoustic emission monitoring of reinforced concrete beams subjected to four-point-bending[J]. Applied Acoustics, 2017, 117: 28-38. [18] FARHIDZADEH A, SALAMONE S, SINGLA P. A probabilistic approach for damage identification and crack mode classification in reinforced concrete structures[J]. Journal of Intelligence Material System Structure, 2013, 24: 1722-1735. [19] SUTHAR D, SRIVASTAVA J, KABINESH J M, et al. Probabilistic approach to crack mode classification in concrete under uniaxial compression[C]∥Proceedings of NDE 2017 Conference & Exhibition of the Indian Society for NDE. Chennai, India: World Press, 2017. [20] DAS A K, SUTHAR D, LEUNG C. Machine learning based crack mode classification from unlabeled acoustic emission waveform features[J]. Cement and Concrete Research, 2019, 121:42-57. [21] RAZMI A, MIRSAYAR M M. On the mixed mode I/II fracture properties of jute fiber-reinforced concrete[J]. Construction & Building Materials, 2017, 148(1): 512-520. [22] ZILE E Z. Effect of the fiber geometry on the pullout response of mechanically deformed steel fibers[J]. Cement and Concrete Research, 2013, 44: 18-24. [23] LI B, CHI Y, XU L H, et al. Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete[J]. Construction and Building Materials, 2018, 191: 80-94. [24] 中国工程建设协会.纤维混凝土试验方法标准: CECS 13—2009[S]. 北京: 中国计划出版社, 2010. China Engineering Construction Industry Association.Standard test method for fiber reinforced concrete: CECS 13—2009[S]. Beijing: China Planning Press, 2010.(in Chinese) [25] 中华人民共和国住房与城乡建设部.钢纤维混凝土:JG/T 472—2015[S]. 北京: 中国标准出版社, 2015. Ministry of Housing and Urban-Rural Development of the people's Republic of China.Steel fiber reinforced concrete:JG/T 472—2015[S]. Beijing: Standards Press of China, 2015.(in Chinese) [26] 张胜利. 钢纤维混凝土纤维分布与力学性能关系试验研究及数值仿真[D]. 太原:太原理工大学, 2018. ZHANG S L. Experimental study and numerical simulation on the relationship between fiber distribution and mechanical properties of steel fiber reinforced concrete[D]. Taiyuan:Taiyuan University of Technology, 2018.(in Chinese) [27] DONG S, WANG Y, XIA Y M. Stress intensity factors for central cracked circular disk subjected to compression[J]. Engineering Fracture Mechanics, 2004, 71(7/8):1135-1148. [28] AGGELIS D G. Classification of cracking mode in concrete by acoustic emission parameters[J]. Mechanics Research Communications, 2011, 38(3):153-157. [29] ANAY R, SOLTANGHARAEI V, ASSI L, et al. Identification of damage mechanisms in cement paste based on acoustic emission[J]. Construction and Building Materials, 2018, 164:286-296. [30] ARCHANA N, NAIR C S, KONG X, et al. Using acoustic emission to monitor failure modes in CFRP-strengthened concrete structures[J]. Journal of Aerospace Engineering, 2020, 33(1): 04019110. [31] YU J G, ZIEHL P, ZRATE B, et al. Prediction of fatigue crack growth in steel bridge components using acoustic emission[J]. Journal of Constructional Steel Research, 2011, 67(8):1254-1260. [32] 张凌凡, 陈忠辉, 秦凡, 等. 岩石断裂混合矩张量反演与数值分析[J].矿业科学学报,2019,4(5):394-402. ZHANG L F, CHEN Z H, QIN F, et al. Hybrid moment tensor inversion and numerical analysis of rock fracture[J]. Journal of Mining Science and Technology, 2019, 4(5): 394-402.(in Chinese) [33] RANJBAR N, BEHNIA A, CHAI H K, et al. Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis[J]. Construction and Building Materials, 2016, 127: 274-28.
|