[1] 王振林,孙浩,何芳,等. 纤维增强树脂基复合材料制造技术研究进展[J]. 化学与粘合, 2020, 42(5): 377-382. WANG Z L, SUN H, HE F, et al. Research progress in manufacturing technology of fiber reinforced resin based composites[J]. Chemistry and Adhesion, 2020, 42(5): 377-382. (in Chinese) [2] 徐强. 复合材料热压罐成型工艺仿真技术研究综述[J]. 航空制造技术, 2020, 63(15): 34-38, 47. XU Q. A review on autoclave process simulation for composites manufacturing [J]. Aeronautical Manufacturing Technology, 2020,63(15):34-38,47. (in Chinese) [3] 宁莉,杨绍昌,冷悦,等. 先进复合材料在飞机上的应用及其制造技术发展概述[J]. 复合材料科学与工程, 2020(5): 123-128. NING L, YANG S C, LENG Y, et al. Overview of the application of advanced composite materials on aircraft and the development of its manufacturing technology[J]. Composites Science and Engineering, 2020(5):123-128. (in Chinese) [4] 赵云峰,孙宏杰,李仲平. 航天先进树脂基复合材料制造技术及其应用[J]. 宇航材料工艺, 2016, 46(4): 1-7. ZHAO Y F, SUN H J, LI Z P, et al. Manufacturing technology and its application of aerospace advanced polymer matrix composites[J]. Aerospace Materials & Technology, 2016, 46(4): 1-7. (in Chinese) [5] ANOSHKIN A N, ZUIKO V Y, SHIPUNOV G S, et al. Technologies and problems of composite materials mechanics for production of outlet guide vane for aircraft jet engine[J]. PNRPU Mechanics Bulletin, 2014, 75(4): 5-44. [6] 谢富原. 先进复合材料制造技术[M]: 北京:航空工业出版社, 2017. XIE F Y. Advanced composites manufacturing technology[M]. Beijing:Aviation Industry Press, 2017. (in Chinese) [7] 陈绍杰. 浅谈复合材料的整体成型技术[J]. 高科技纤维与应用, 2005,30(1): 6-9, 20. CHEN S J. Integrity technology of composites[J]. Hi-Tech Fiber & Application, 2005,30(1): 6-9, 20. (in Chinese) [8] 常青,张敏弟,马潇健,等. 碳纤维复合材料各向异性特性对气泡形态影响试验研究[J]. 兵工学报, 2019, 40(11): 2272-2282. CHANG Q, ZHANG M D, MA X J, et al. Experimental research on the effect of anisotropic properties of composite material on bubble shape[J]. Acta Armamentarii, 2019, 40(11): 2272-2282. (in Chinese) [9] 张铖,张博明,王永贵,等. 复合材料结构固化温度场精化模拟[J]. 材料开发与应用, 2010, 25(3): 41-46. ZHANG C, ZHANG B M, WANG Y G, et al. Refined simulation on curing temperature field of composite structures[J]. Development and Application of Materials, 2010, 25(3):41-46. (in Chinese) [10] 崔亚男. 成型压力对PES树脂材料力学性能的影响[J]: 粘接, 2021, 45(1):54-57. CUI Y N. Effect of molding pressure on mechanical properties of PES resin materials[J]. Adhesion, 2021,45(1):54-57. (in Chinese) [11] GNIATCZYK J L, ACUUILINA G R, DEAVER D T. Molding tools and parts and processes of forming molding tools: WO2001012408A3[P]. 2001-08-30. [12] 花蕾蕾,安鲁陵,匡海华,等. 复合材料构件热压罐成型模具温度均匀性分析[J]. 南京航空航天大学学报, 2019, 51(3): 357-365. HUA L L, AN L L, KUANG H H, et al. Analysis of temperature field uniformity of composite mold in autoclave[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2019,51(3):357-365. (in Chinese) [13] HAN N, AN L L, FAN L X, et al. Research on temperature field distribution in a frame mold during autoclave process[J]. Materials, 2020, 13(18):4020. [14] 张铖,梁宪珠,王永贵,等. 热压罐工艺环境对于先进复合材料框架式成型模具温度场的影响[J]. 材料科学与工程学报, 2011, 29(4): 547-553. ZHANG C, LIANG X Z, WANG Y G, et al. Rules of impact of autoclave environment on frame mould temperature field of advanced composites[J]. Journal of Materials Science and Engineering, 2011, 29(4): 547-553. (in Chinese) [15] 张旭生,甘忠,张海燕. 热压罐时效成形模具温度场优化研究[J]. 中国制造业信息化, 2011, 40(19): 30-32, 37. ZHANG X S, GAN Z, ZHANG H Y. Research on optimization of mold temperature fields in autoclave age forming[J]. MIE of China, 2011, 40(19): 30-32, 37. (in Chinese) [16] 赵一鸣,安鲁陵,匡海华,等. 复合材料构件成型模具温度场均匀性改善研究[J]. 航空制造技术, 2018, 61(5): 84-88, 94. ZHAO Y M, AN L L, KUANG H H, et al. Study on improvement of temperature field uniformity of composite mold[J]. Aeronautical Manufacturing Technology, 2018,61(5): 84-88, 94. (in Chinese) [17] 罗登峰. 热压罐工艺的传热分析和框架式模具温度场分布[J]. 中国高新技术企业, 2013 (19): 84-85. LUO D F. Heat transfer analysis of autoclave process and temperature field distribution of frame mold[J]. China High Technology Enterprises, 2013 (19): 84-85.(in Chinese) [18] HU J, ZHAN L H, YANG X B, et al. Temperature optimization of mold for autoclave process of large composite manufacturing[J]. Journal of Physics: Conference Series, 2020, 1549(3):032086. [19] 杨春霞,王伟,张国伟,等. 热压罐成型框架式模具温度场分析[J]. 电子机械工程, 2020, 36(3): 48-52. YANG C X, WANG W, ZHANG G W, et al. Study on temperature field distribution property of large frame type molds in autoclave process[J]. Electro-Mechanical Engineering, 2020, 36(3):48-52. (in Chinese) [20] 张铖. 大型复合材料结构热压罐工艺温度场权衡设计[D]. 哈尔滨:哈尔滨工业大学, 2009. ZHANG C. Curing temperature field tradeoff design method of large-scale composite material structure in autoclave process[D]. Harbin:Harbin Institute of Technology, 2009. (in Chinese)
下8篇留版 第43卷第1期2022 年1月 兵工学报ACTA ARMAMENTARII Vol.43No.1Jan.2022
|