[1] 刘佩进,唐金兰.航天推进理论基础[M].西安:西北工业大学出版社,2016. LIU P J,TANG J L.Theoretical basis of space propulsion[M].Xi'an: Northwestern Polytechnical University Press,2016.(in Chinese) [2] A·M·维尼茨基.固体火箭发动机[M].俞金康,译.北京:国防工业出版社,1981. VINITSKY A M.Solid rocket motor[M].YU J K, translated.Beijing:National Defence Industry Press,1981.(in Chinese) [3] 王栋,封峰,陈军.固体火箭发动机基础[M].北京:北京理工大学出版社,2016. WANG D,FENG F,CHEN J.Solid rocket engine foundation[M].Beijing:Beijing Institute of Technology Press, 2016.(in Chinese) [4] GUAN D,LI S P,SUI X,et al.Mechanism of influence of high-speed self-spin on ignition transients for a solid rocket motor: a numerical simulation[J].Propellants,Explosives,Pyrotechnics. 2020,45(7):1040-1056. [5] FAVINI B,ZAGHI S,SERRAGLIA F.3D numerical simulation of ignition transient in SRM[C]∥Proceedings of the 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit.Sacramento,CA,US:AIAA,2006. [6] 孟亮飞,田发林,周长省.阶梯装药固体火箭发动机点火内流场特性研究[J].弹箭与制导学报,2010,30(5):127-130. MENG L F,TIAN F L,ZHOU C S.The study on ignition interior flow field characteristics of ladder-shaped propellant solid rocket motor [J].Journal of Projectiles,Rockets,Missiles and Guidance,2010,30(5):127-130.(in Chinese) [7] 杨乐,余贞勇,何景轩.大长径比固体火箭发动机点火瞬态内流场特性分析[J].导弹与航天运载技术,2018(4):33-36. YANG L,YU Z Y,HE J X.Analysis of inner flow characteristic of ignition transient for large aspect ration solid rocket motor[J].Missilesand Space Vehicles,2018(4):33-36.(in Chinese) [8] 刘君,郭正,郭健,等.非结构网格技术应用于固体火箭发动机内流场数值模拟[J].固体火箭技术,2001,24(4):9-11. LIU J,GUO Z,GUO J,et al.Numerical simulation on inner flow field of SRM by using unstructured grids technology[J].Journal of Solid Rocket Technology,2001,24(4):9-11.(in Chinese) [9] 王志健,杜佳佳.动网格在固体火箭发动机非稳态工作过程中的应用[J].固体火箭技术,2008,31(4):350-353. WANG Z J,DU J J.Application of dynamic mesh to unsteady burning of solid rocket motor[J].Journal of Solid Rocket Technology,2008,31(4):350-353.(in Chinese) [10] 宋大明,周长省.固体火箭发动机瞬态内流场数值仿真[J].弹箭与制导学报,2010,30(6):147-149. SONG D M, ZHOU C S. Numerical simulation of transient internal flowfields in solid rocket motor[J].Journal of Projectiles,Rockets,Missiles and Guidance,2010,30(6):147-149.(in Chinese) [11] 杨瑄,赵东民,余贞勇.某低燃速推进剂侵蚀燃烧模型研究[J].宇航学报,2008,29(6):1932-1935. YANG X,ZHAO D M,YU Z Y.Erosive burning model identification of a propellant with low burning rate [J]. Journal of Astronautics,2008,29(6):1932-1935.(in Chinese) [12] 张洪林.侵蚀燃烧在发射装药内弹道中的应用研究[J].兵工学报,2008,29(2):129-133. ZHANG H L.Application research of erosive burn in propellant charge interior ballistics [J].Acta Armamentarii,2008,29(2):129-133.(in Chinese) [13] 唐必顺,陈军,马虎.固体火箭发动机侵蚀燃烧的数值仿真[J].计算机仿真,2014,31(4):69-72. TANG B S,CHEN J,MA H.Numerical simulation process of erosive burning in a solid rocket motor[J].Journal of Computer Simulation, 2014,31(4):69-72.(in Chinese) [14] 刘洋,吴育飞,李宗岩,等.大型分段装药发动机绝热环烧蚀特性实验研究[J].推进技术,2014,35(1):93-100. LIU Y,WU Y F,LI Z Y,et al.Experimental investigation on ablation characteristic of restrictor plate in large segment-propellant rocket motor[J].Journal of Propulsion Technology,2014,35(1):93-100.(in Chinese) [15] 李建,吴飞春,刁吉阳,等.小型发射级固体火箭发动机点火性能试验研究[J].火工品,2018(3):6-8. LI J,WU F C,DIAO J Y,et al.Experimental investigation on ignition performance of small launching-usage solid rocket motor[J].Initiators & Pyrotechnics,2018(3):6-8.(in Chinese) [16] 郑伟,陈俊波,裴江峰,等.自由装填大长径比火箭发动机装药试验研究[J].火炸药学报,2020,43(4):433-437. ZHENG W,CHEN J B,PEI J F,et al. Experimental study on free loading of rocket motor with large aspect ratio[J].Chinese Journal of Explosives & Propellants,2020,43(4):433-437.(in Chinese) [17] 吕兆华,郑亚,方同安.固体推进剂侵蚀燃烧的实验研究—双铅—2火药侵蚀特性的测定[J]. 兵工学报:弹箭分册,1981,3(8):72-82. L Z H, ZHENG Y, FANG T A.Experimental study on erosive combustion of solid propellant-double lead-2 determination of erosion properties of gunpowder[J].Acta Armamentarii: Projectiles and Rockets,1981,3(8):72-82. (in Chinese) [18] 方丁酉,张为华,杨涛.固体火箭发动机内弹道学[M].长沙:国防科技大学出版社,1997. FANG D Y,ZHANG W H,YANG T.Interior ballistics of solid propellant rocket motor [M].Changsha:National University of Defense Technology Press,1997.(in Chinese) [19] 吴兴安.双基发射药[M]. 北京:国防工业出版社,1974. WU X A. Double base gun propellant [M]. Beijing: National Defense Industry Press, 1974.(in Chinese)
|