Impact Temperature Rise Law of Porous Aluminum-rich PTFE/Al Energetic Material

doi:10.3969/j.issn.1000-1093.2021.02.001

Abstract

Abstract: In order to obtain the influence of porosity on the temperature rise effect of aluminum-rich PTFE/Al energetic materials, an one-dimensional viscoplastic cavity collapse model considering the melting effect is used to theoretically analyze the impact temperature rise of the material. A micro-discrete model of aluminum-rich PTFE/Al with porosity of 10%, 20%, and 30% was established, and the numerical simulation was performed with the help of AUTODYN nonlinear dynamic finite element software to analyze the pore compression and temperature rise of porous aluminum-rich PTFE/Al energetic materials under impact loading. In addition, the numerically simulated result was validated through a split Hopkinson pressure bar (SHPB) experiment. The results show that the internal temperature of the material generally increases intermittently with the periodic loading of the incident bar; during the compression process, the temperature rise of porous aluminum-rich PTFE/Al energetic materials is mainly affected by the hole inner diameter velocity a· and the yield strength Y; compared with 20% and 30% porosity aluminum-rich PTFE/Al energetic materials, the 10% porosity aluminum-rich PTFE/Al energetic materials have the highest temperature rise during material compression.

Key words: energeticstructuralmaterial, PTFE/Al, materialporosity, mesoscalesimulation, impacttemperaturerise

CLC Number:

TJ410.1

CAI Shangye, JIANG Chunlan, MAO Liang, WANG Zaicheng, HU Rong, YE Sheng. Impact Temperature Rise Law of Porous Aluminum-rich PTFE/Al Energetic Material[J]. Acta Armamentarii, 2021, 42(2): 225-233.

References 23

[1]	KOCH E C. Metal-fluorocarbon based energetic materials [M]. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2012: 6-17.
[2]	SHEN Y B. The chemical and mechanical behaviors of polymer/reactive metal systems under high strain rates [D].Atlanta, GA， US: Georgia Institute of Technology, 2012: 9-34.
[3]	WU J X, FANG X, GAO Z R, et al. Investigation on mechanical properties and reaction characteristics of Al-PTFE composites with different Al particle size[J]. Advances in Materials Science and Engineering, 2018: ID 2767563.
[4]	MCGREGOR N M, SUTHERLAND G T. Plate impact experiments on a porous teflon aluminum mixture[J]∥AIP Conference Proceedings， 2004, 706(1): 10.1063/1.1780406.
[5]	DOLGOBORODOV A Y, MAKHOV M N, KOLBANEV I V, et al. Detonation in an aluminum-Teflon mixture[J]. Journal of Experimental & Theoretical Physics Letters, 2005, 81(7):311-314.
[6]	KOCH E C，WEBB R，WEISER V. Review on thermo chemical codes [M]. Brussels, Belgium: NATO-Munitions Safety Information Analysis Center, 2011: 7-31.
[7]	FENG B, LI Y C, WU S Z, et al. A crack-induced initiation mechanism of Al-PTFE under quasi-static compression and the investigation of influencing factors[J]. Materials & Design, 2016, 108:411-417.
[8]	乌布力艾散·麦麦提图尔荪, 葛超, 董永香, 等. 基于Al/PTFE真实细观特性统计模型的宏观力学性能模拟[J]. 复合材料学报, 2016, 33(11):2528-2536. MAIMAITITUERSUN W，GE C，DONG Y X, et al. Simulation on mechanical properties of Al/PTFE based on mesoscopic statistical model [J]. Acta Materiae Compositae Sinica, 2016, 33(11):2528-2536. (in Chinese)
[9]	DUAN Z P, WEN L J, LIU Y, et al. A pore collapse model for hot-spot ignition in shocked multi-component explosives [J]. International Journal of Nonlinear Sciences and Numerical Simulation, 2010, 11(Supplement):19-23.
[10]	WHITWORTH N J. Mathematical and numerical modeling of shock initiation in heterogeneous solid explosives [D]. Bedfordshire, UK: Cranfield University, 2008.
[11]	张振宇, 浣石, 卢芳云. 多孔TNT炸药中热点形成的粘塑性塌缩机理[J]. 含能材料, 1994, 2(2): 36-48.ZHANG Z Y, HUAN S, LU F Y. Viscoplastic collapse mechanism of hot-spot formation in porous TNT explosives[J]. Chinese Journal of Energetic materials, 1994, 2(2): 36-48. (in Chinese)
[12]	MEYERS M A. Mechanical behavior of materials [J]. Upper Saddle River, NJ, US: Prentice Hall, 1998: 62-97.
[13]	FREY R B. The initiation of explosive charges by rapid shear [C]∥Proceedings of the 7th Symposium on Detonation. Annapolis, MD, US: Narel Surface Weapon Center, 1981.
[14]	WANG L, LIU J X, LI S K, et al. Investigation on reaction energy, mechanical behavior and impact insensitivity of W-PTFE-Al composites with different W percentage[J]. Materials & Design, 2016, 92:397-404.
[15]	李尉,任会兰,宁建国,等 . Al/PTFE 活性材料的动态力学行为和撞击点火特性[J]. 含能材料,2020,28(1):38-45. LI W, REN H L, NING J G, et al. Dynamic mechanical beha- vior and impact ignition characteristics of Al/PTFE reactive materials[J]. Chinese Journal of Energetic Materials, 2020, 28(1): 38-45. (in Chinese)
[16]	JIANG C L, CAI S Y, MAO L， et al. Effect of porosity on dynamic mechanical properties and impact response characteristics of high aluminum content PTFE/Al energetic materials [J]. Materials, 2020, 13(1): 140-150.
[17]	门建兵，蒋建伟，王树有. 爆炸冲击数值模拟技术基础[M]. 北京: 北京理工大学出版社，2015: 97-146. MEN J B, JIANG J W, WANG S Y. Fundamentals of numerical simulation for explosion and shock problems [M]. Beijing: Beijing Institute of Technology Press, 2015: 97-146. (in Chinese)
[18]	徐松林. Al/PTFE含能反应材料力学性能研究[D].长沙: 国防科学技术大学, 2010: 109-120.XU S L. Study on the mechanical performance of polytetrafluoroethylene/Al energetic reactive materials[D]. Changsha: National University of Defense Technology, 2010: 109-120. (in Chinese)
[19]	李建光，施琪，曹结东. Johnson-Cook本构方程的参数标定[J]. 兰州理工大学学报，2012，38(2)：164-167. LI J G, SHI Q, CAO J D. Parameters calibration for Johnson-Cook constitutive equation [J]. Journal of Lanzhou University of Technology, 2012, 38(2): 164-167. (in Chinese)
[20]	王芳, 蒋建伟, 门建兵. 钨铜射流成形的细观数值模拟分析[J]. 兵工学报, 2018, 39(2):245-253. WANG F, JIANG J W, MEN J B. Mesoscopic numerical simulation on the formation of tunsgsten-copper shaped charge jet [J]. Acta Armamentarii, 2018, 39(2):245-253. (in Chinese)
[21]	乔良. 多功能含能结构材料冲击反应与细观特性关联机制研究[D]. 南京：南京理工大学, 2013:13-34.QIAO L. Study on the effects of mesoscale characteristic on shock reaction behavior of multifunctional energetic structural materials (MESMs) [D]. Nanjing: Nanjing University of Science and Technology, 2013: 13-34. (in Chinese)
[22]	FYE P M . Initiation and growth of explosion in liquids and solids[J]. Journal of Chemical Education, 1953, 30(6):326.
[23]	LI Y, WANG Z C, JIANG C L, et al. Experimental study on impact-induced reaction characteristics of PTFE/Ti composites enhanced by W particles[J]. Materials, 2017, 10(2): 175.