[1] 莫梦婷, 赵文杰, 陈子飞,等. 海洋减阻技术的研究现状[J]. 摩擦学学报, 2015, 35(4):505-515. MO M T, ZHAO W J, CHEN Z F, et al. Research status of marine drag reduction technologies [J]. Tribology, 2015, 35(4):505-515.(in Chinese)
[2] MCCORMICK M E, BHATTACHARYYA R. Drag reduction of a submersible hull by electrolysis[J]. Naval Engineers Journal, 1973, 85(2):11-16. [3] PAL S, MERKLE C L, DEUTSCH S. Bubble characteristics and trajectories in a microbubble boundary layer[J]. Physics of Fluids, 1988,31(4):744-751. [4] SANDERS W C, WINKEL E S, DOWLING D R, et al. Bubble friction drag reduction in a high-Reynolds-number flat-plate turbulent boundary layer[J]. Journal of Fluid Mechanics, 2006,552(1): 353-380. [5] ELBING B R, WINKEL E S, LAY K A, et al. Bubble-induced skin-friction drag reduction and the abrupt transition to air-layer drag reduction[J]. Journal of Fluid Mechanics, 2008,612(11):201-236. [6] MARYAMI R, FARAHAT S, JAVADPOUR M, et al. Frictional drag reduction using small bubbles in a Couette-Taylor flow[J]. Journal of Marine Science and Technology, 2015,20(4):652-669. [7] PAIK B G, KIM K Y, KIM K S, et al. The effects of microbubbles on skin friction in a turbulent boundary layer flow[J]. International Journal of Multiphase Flow, 2015,80(12):164-175. [8] VERSCHOOF R A, RC V D V, SUN C, et al. Bubble drag reduction requires large bubbles[J]. Physical Review Letters, 2016,117(10):104502. [9] KAWAMURA T, MORIGUCHI Y, KATO H, et al. Effect of bubble size on the microbubble drag reduction of a turbulent boundary layer [C]∥Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference. Honolulu, HI, US: ASME, 2003:647-654.
[10] 王家楣, 姜曼松, 郑晓伟, 等. 不同喷气形式下船舶微气泡减阻水池试验研究[J]. 华中科技大学学报(自然科学版), 2004, 32(12):78-80. WANG J M, JIANG M S, ZHENG X W, et al. Study of drag reduction of vessel model by microbubble with different injection forms in the towing basin [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2004, 32(12): 78-80. (in Chinese)
[11] 王家楣, 郑晓伟, 姜曼松. 船舶吃水对微气泡减阻影响的水池试验研究[J]. 船舶工程, 2004,26(6):9-12. WANG J M, ZHENG X W, JIANG M S. Test research on drag reduction of ship model at different draft by microbubble in towing basin [J]. Ship Engineering, 2004, 26(6):9-12. (in Chinese) [12] 杨新峰, 苑秉成, 陈立纲,等. 微气泡减阻实验研究[J]. 水动力学研究与进展 A辑, 2009, 24(1):89-94. YANG X F, YUAN B C, CHEN L G, et al. Experimental study on drag reduction by microbubbles [J]. Journal of Hydrodynamics A, 2009, 24(1):89-94. (in Chinese)
[13] 宋武超, 王聪, 魏英杰,等. 微气泡与聚合物对水下航行体减阻特性影响试验研究[J]. 兵工学报, 2018, 39(6):1151-1158. SONG W C, WANG C, WEI Y J, et al. Influences of microbubble and homogeneous polymer on drag reduction characteristics of axisymmetric body[J]. Acta Armamentarii, 2018, 39(6):1151- 1158.(in Chinese) [14] PANG M J, WEI J J, YU B. Numerical study on modulation of microbubbles on turbulence frictional drag in a horizontal channel[J]. Ocean Engineering, 2014,81(5):58-68. [15] PANG M J, WEI J J. A mechanism on liquid-phase turbulence modulation by microbubbles[J]. Advances in Mechanical Engineering, 2014 (10): 1-9. [16] MOHANARANGAM K, CHEUNG S C P, TU J Y, et al. Numerical simulation of micro-bubble drag reduction using population balance model[J]. Ocean Engineering, 2009,36(11):863- 872. [17] RAMEZANI M, KONG B, GAO X, et al. Experimental measurement of oxygen mass transfer and bubble size distribution in an air-water multiphase Taylor-Couette vortex bioreactor[J]. Chemical Engineering Journal, 2015, 279(5):286-296. [18] 郭峰, 毕毅, 操戈. 利用微气泡减小平板摩擦阻力的数值模拟[J]. 海军工程大学学报, 2008, 20(6):50-54. GUO F, BI Y, CAO G. Numerical simulation of friction resistance reduction of a flat plate by micro-bubbles[J]. Journal of Naval University of Engineering, 2008, 20(6):50-54. (in Chinese) [19] 傅慧萍. 平板微气泡减阻数值模拟及影响因素分析[J]. 哈尔滨工程大学学报, 2015, 36(10):1297-1301. FU H P. Numerical simulation of microbubble drag reduction in a plate and factors in fluencing its practicality process [J]. Journal of Harbin Engineering University, 2015, 36(10):1297-1301. (in Chinese) [20] 傅慧萍, 李杰. 微气泡减阻的数值模拟方法及尺寸效应[J]. 上海交通大学学报, 2016, 50(2):278-282. FU H P, LI J. Numerical simulation methods of microbubbles drag reduction and scale effect [J]. Journal of Shanghai Jiao Tong University, 2016, 50(2):278-282. (in Chinese)
[21] 吴乘胜, 何术龙. 微气泡流的数值模拟及减阻机理分析[J]. 船舶力学, 2005, 9(5):30-37. WU C S, HE S L. Numerical simulation of microbubble flow and analysis of the mechanism of drag reduction [J]. Journal of Ship Mechanics, 2005, 9(5):30-37. (in Chinese)
[22] JOHN D, ANDREW K. A benchmark control problem for supercavitating vehicles and an initial investigation of solutions[J]. Journal of Vibration & Control, 2003, 9(7):791-804. [23] 李其弢. 通气超空泡航行体水下摆动运动试验与模型[D]. 上海:上海交通大学,2009. LI Q T. Experimental investigations and simulations to the ventilated supercavitating flows on dynamic model manipulated with pitching motion[D]. Shanghai: Shanghai Jiao Tong University, 2009.(in Chinese) [24] 李振旺.水下高速航行体机动运动非定常超空泡数值模拟[D]. 哈尔滨: 哈尔滨工业大学, 2013: 44-56. LI Z W. Transient numerical study on maneuverable motion of high speed supercavitating vehicles[D]. Harbin: Harbin Institute of Technology, 2013: 44-56. (in Chinese) [25] FONTAINE A A, DEUTSCH S, BRUNGART T A, et al. Drag reduction by coupled systems: microbubble injection with homogeneous polymer and surfactant solutions[J]. Experiments in Fluids, 1999,26(5):397-403. [26] SONG W C, WANG C, WEI Y J, et al. Experimental study of microbubble drag reduction on an axisymmetric body[J]. Modern Physics Letters B, 2018, 32(13):1850035.
第40卷第6期 2019 年6月兵工学报ACTA ARMAMENTARIIVol.40No.6Jun.2019
|