[1] LI Y F, YIN Y H, YANG H, et al. Modeling for optimization of circular flat pad aerostatic bearing with a single central orifice-type restrictor based on CFD simulation [J]. Tribology International, 2017, 109:206-216. [2] ZHANG J, ZOU D, TA N, et al. Numerical research of pressure depression in aerostatic thrust bearing with inherent orifice[J]. Tribology International, 2018,123: 385-396. [3] 何兵,王宏光.单供气孔静压平面止推空气轴承静特性分析[J]. 润滑与密封, 2013, 38(3): 76-80. HE B, WANG H G. Analysis on static performances of aerostatic thrust bearing with single orifice [J]. Lubrication Engineering, 2013, 38(3): 76-80.(in Chinese) [4] 叶燚玺. 超精密运动平台中气浮支承振动特性的研究[D].武汉:华中科技大学, 2010:55-74. YE Y X. Vibration characteristics of aerostatic bearing in ultra-precision motion stage [D].Wuhan: Huazhong University of Science and Technology, 2010: 55-74.(in Chinese) [5] BELFORTE G, RAPARELLI T, VIKTOROV V, et al. Discharge coefficients of orifice-type restrictor for aerostatic bearings[J]. Tribology International, 2007,40(3):512-521. [6] 崔海龙, 岳晓斌, 张连新, 等.基于数值模拟的小孔节流空气静压轴承静动态特性研究[J]. 机械工程学报,2016, 52(9): 116-121. CUI H L, YUE X B, ZHANG L X, et al. Static and dynamic characteristics of aerostatic bearing based on numerical simulation [J]. Journal of Mechanical Engineering, 2016, 52(9):116-121.(in Chinese) [7] 卢志伟, 马方杰, 刘波, 等. 静压止推气浮轴承动特性的微扰动法研究[J]. 兵工学报, 2016, 37(1):149-154. LU Z W, MA F J, LIU B, et al. Research on dynamic characteristics of aerostatic thrust bearings based on perturbation method[J]. Acta Armamentarii, 2016, 37(1):149-154. (in Chinese) [8] 李雅哲, 周凯. 改进型流量误差反馈迭代法及其空气静压轴承应用[J]. 清华大学学报(自然科学版), 2017, 57(9): 980-985. LI Y Z,ZHOU K. Flow-difference feedback iteration method for aerostatic bearings[J]. Journal of Tsinghua University (Science and Technology), 2017,57(9): 980-985. (in Chinese) [9] NAKAMURA T, YOSHIMOTO S. Static tilt characteristics of ae-rostatic rectangular double-pad thrust bearings with compound restrictors[J]. Tribology International, 1996, 29(2):145-152.
[10] KWAN Y B P, POST J B. A tolerancing procedure for inherently compensated rectangular aerostatic thrust bearing[J]. Tribology International, 2000, 33(8): 581-585. [11] FOURKA M, TIAN Y, BONIS M. Prediction of the stability of air thrust bearings by numerical, analytical and experimental methods[J]. Wear, 1996, 198(1/2):1-6. [12] CHEN M F, LIN Y T. Static behavior and dynamic stability ana-lysis of grooved rectangular aerostatic thrust bearings by modified resistance network method[J]. Tribology International, 2002, 35(5): 329-338. [13] 马武学. 并行多微通道气体静压止推轴承承载特性研究[D]. 哈尔滨:东北林业大学, 2013:51-66. MA W X. Study on loading characteristic of parallel micro-channel compensated aerostatic thrust bearing[D]. Harbin: Northeast Forestry University, 2013:51-66. (in Chinese) [14] 吴初涵. 多孔质气浮轴承的理论实验研究[D]. 天津:天津大学, 2012: 2-6. WU C H. The theoretical and experimental research of porous air bearings[D]. Tianjin:Tianjin University, 2012:2-6. (in Chinese) [15] 陈东菊,边艳华,周帅,等.空气静压导轨气膜波动主要影响因素分析[J]. 机械工程学报, 2014, 50(15):97-103. CHEN D J, BIAN Y H, ZHOU S, et al. Influence factor analysis for gas fluctuation of aerostatic guideway[J]. Journal of Mechanical Engineering, 2014, 50(15): 97-103. (in Chinese) [16] MONDAL N, SAHA R, SANYAL D. Modeling and performance analysis of aerostatic bearings for lifting heavy payload[J]. Procedia Engineering, 2014, 90:123-128. [17] YANG D W, CHEN C H, KANG Y, et al. Influence of orifices on stability of rotor-aerostatic bearing system[J]. Tribology International, 2009, 42(8): 1206-1229. [18] 傅徳薰, 马延文, 李新亮, 等. 可压缩湍流直接数值模拟[M]. 北京:科学出版社, 2010:3-11. FU D X, MA Y W, LI X L, et al. Direct numerical simulation of compressible turbulence[M]. Beijing: Science Press, 2010: 3-11. (in Chinese)
第40卷 第10期2019 年10月兵工学报ACTA ARMAMENTARIIVol.40No.10Oct.2019
|