[1] Iqbal S, Al-Bender F, Ompusunggu A P, et al. Modeling and analysis of wet friction clutch engagement dynamics[J]. Mecha- nical Systems and Signal Processing, 2015, 60(8): 420-436. [2] 张志刚, 周晓军, 沈路, 等. 湿式离合器动态接合特性的仿真与试验[J]. 中国公路学报, 2010, 23(3): 115-120. ZHANG Zhi-gang,ZHOU Xiao-jun,SHEN Lu, et al. Simulation and experiment on dynamic engagement characteristics of wet clutch[J]. China Journal of Highway and Transport, 2010, 23(3): 115-120.(in Chinese) [3] 杨立昆, 李和言, 马彪. 改进的湿式离合器带排转矩模型[J]. 吉林大学学报: 工学版, 2014,44(5): 1270-1275. YANG Li-kun,LI He-yan,MA Biao. Improved drag torque model for wet clutch[J]. Journal of Jilin University: Engineering and Technology Editon, 2014, 44(5): 1270-1275.(in Chinese) [4] Li W B, Huang J F, Fei J, et al. Study on tribological properties as a function of operating conditions for carbon fabric wet clutch[J]. Tribology International, 2016, 94(10): 428-436. [5] 林腾蛟, 王清, 谢言, 等. 湿式摩擦离合器带排扭矩预测及影响因素分析[J]. 华南理工大学学报:自然科学版, 2016,44(3): 29-35. LIN Teng-jiao,WANG Qing, XIE Yan, et al. Towing torque prediction and influence factor analysis of wet friction clutch[J]. Journal of South China University of Technology: Natural Science Edition, 2016,44(3): 29-35.(in Chinese) [6] Zhao J, Ma B, Li H, et al. The effect of lubrication film thickness on thermoelastic instability under fluid lubricating condition[J]. Wear, 2013, 303(1): 146-153. [7] 陈漫, 马彪, 李国强, 等. 多片湿式离合器接合过程转矩特性研究[J]. 华中科技大学学报: 自然科学版, 2014, 42(5): 34-39. CHEN Man,MA Biao,LI Guo-qiang, et al. Study on torque characteristics of multi-plate wet clutches during engagement[J]. Journal of Huazhong University of Science and Technology:Natural Science Edition, 2014, 42(5): 34-39.(in Chinese) [8] Xiong C B, Ma B, Li H Y, et al. Experimental study and thermal analysis on the buckling of friction components in multi-disc clutch[J]. Journal of Thermal Stresses, 2015, 38(11): 1323-1343. [9] Zhao J, Chen Z, Yang H, et al. Finite element analysis of thermal buckling in automotive clutch plates[J]. Journal of Thermal Stresses, 2016, 39(1): 77-89.
[10] 杨勇强, 李小莹, 曹博涛, 等. 湿式摩擦离合器摩擦片的热力耦合分析[J]. 机械传动, 2016, 40(1): 153-156. YANG Yong-qiang,LI Xiao-ying,CAO Bo-tao, et al. Thermo-mechanical coupling analysis of friction plate of wet friction clutch[J]. Journal of Mechanical Transmission, 2016, 40(1): 153-156.(in Chinese) [11] Dowson D. A generalized Reynolds equation for fluid-film lubrication[J]. International Journal of Mechanical Sciences, 1962, 4(2): 159-170. [12] Hu Y Z, Zhu D. A full numerical solution to the mixed lubrication in point contacts[J]. Journal of Tribology, 2000, 122(1): 1-9. [13] Hu Y Z, Wang H, Wang W Z, et al. A computer model of mixed lubrication in point contacts[J]. Tribology International, 2001, 34(1): 65-73. [14] Liu Y C, Wang H, Wang W Z, et al. Methods comparison in computation of temperature rise on frictional interfaces[J]. Tribology International, 2002, 35(8): 549-560. [15] Carslaw H S, Jaeger J C. Conduction of heat in solids[M]. 2nd ed. Oxford: Clarendon Press, 1959:266-270. [16] Wang J M, Kang J F, Zhang Y J, et al. Viscosity monitoring and control on oil-film bearing lubrication with ferrofluids[J]. Tribo- logy International, 2014, 75: 61-68. [17] Wong P L, Wang R, Lingard S. Pressure and temperature dependence of the density of liquid lubricants[J]. Wear, 1996, 201(1): 58-63. [18] Jiang X, Hua D Y, Cheng H S, et al. A mixed elastohydrodynamic lubrication model with asperity contact[J]. Journal of Tribology, 1999, 121(3): 481-491.
第38卷 第4期2017 年4月兵工学报ACTA ARMAMENTARIIVol.38No.4Apr.2017
|