Measurement and Modification of Dynamic Friction Coefficient of Pressed Explosive

doi:10.3969/j.issn.1000-1093.2017.10.007

Abstract

Abstract: In order to investigate the effect of dynamic friction coefficient on the friction ignition of pressed explosive, 8701 pressed explosive is tested on the friction testing system based on the drop hammer apparatus, and tthe coefficients of dynamic friction between 8701 pressed explosive and 45^# steel at different normal pressures are studied. The experimental results show that, when the normal pressure is increased from 1 MPa to 10 MPa, the dynamic friction coefficient is reduced from 0.28 to 0.10, indicating that the dynamic friction coefficient is dependent on pressure. A calculation model of the friction coefficient is proposed based on the experimental results and introduced into the LS-DYNA through secondary development. The thermo-chemo-mechanical coupling numerical simulation is conducted for the skid test of 8701 pressed explosive. The calculated results show that the improved calculation model of friction coefficient prolongs the ignition delay time, increases the critical ignition velocity and raises the critical ignition temperature. The proposed model can be used to study the non-shock friction ignition problem. Key

Key words: ordnancescienceandtechnology, pressedexplosive, frictioncoefficient, frictionignition, drop-hammerimpact

CLC Number:

TJ410.3⁺41

LUO Yi, LIU Yan, HUANG Feng-lei. Measurement and Modification of Dynamic Friction Coefficient of Pressed Explosive[J]. Acta Armamentarii, 2017, 38(10): 1926-1932.

References

［1］ Asay B. Shock wave science and technology reference library [M]. Berlin, Germany: Springer, 2008:293-617.
[2] Heatwole E, Parker G, Holmes M, et al. Grit-mediated frictional ignition of a polymer-bonded explosive during oblique impacts: probability calculations for safety engineering[J]. Reliability Engineering and System Safety, 2015, 134:10-18.
[3] White B W, Springer H K, Reaugh J E. Computational studies of the skid test: evaluation of the non-shock ignition of LX-10 using HERMES[J]. Journal of Physics: Conference Series, 2014, 500(19): 192021.
[4] Dickson P, Parker G, Novak A, et al. Frictionally induced ignition processes in drop and skid tests, LA-UR-10-2186 [R]. Los Alamos, NM, US: Los Alamos National Laboratory, 2010.
[5] 林文洲, 洪滔. 高能炸药摩擦感度的数值模拟[J]. 爆炸与冲击, 2016, 36(6):745-751.
LIN Wen-zhou, HONG Tao. Numerical simulation of friction sensitivity of high explosives[J]. Explosion and Shock Waves, 2016, 36(6):745-751.(in Chinese)

[6] Hayden D W. An analytic tool to investigate the effect of binder on the sensitivity of HMX-based plastic bonded explosives in the skid test[D]. Socorro, NM, US: New Mexico Institute of Mining and Technology, 2004.
[7] 申春迎, 黄谦, 向永, 等. PBX炸药在滑道试验中的响应[J]. 四川兵工学报, 2015, 36(2):136-140.
SHEN Chun-ying, HUANG Qian, XIANG Yong, et al. Reaction behavior for PBX explosives in skid test[J]. Journal of Sichuan Ordnance, 2015, 36(2):136-140.(in Chinese)

[8] Rol B, Katrin B, Philip E, et al. Nanotribology-fundamental studies of friction and plasticity[J]. Advanced Engineering Materials, 2010, 12(5):362-367.
[9] Amuzu J K A, Briscoe B J, Chaudhri M M. Frictional properties of explosives[J]. Journal of Physics D: Applied Physics, 1976, 9(1): 133-143.

[10] Bolotov A N, Strel’Nikov Y A. Effect of high hydrostatic pressure on the external friction coefficient[J]. Journal of Friction and Wear, 2012, 33(3):174-180.
[11] Zukas J A, Walters W P. Explosive effects and applications[J]. International Journal of Impact Engineering, 1998(5):417.
[12] Jiang X B, Guo S, Yao M, et al. Novel method for determining the dynamic friction coefficient of explosives[J]. Combustion, Explosion, and Shock Waves, 2014, 50(1):118-123.
[13] Hoffman D M, Chandler J B. Aspects of the tribology of the plastic bonded explosive LX-04[J]. Propellants Explosives Pyrotechnics, 2004, 29(6):368-373.
[14] Dickson P, Parker G, Smilowitz L, et al. Frictional heating and ignition of energetic materials[J]. AIP Conference Proceedings, 2006, 845(1):1057-1060.
[15] Durand B, Delvare F, Bailly P, et al. Friction between steel and a confined inert material representative of explosives under severe loadings[J]. Experimental Mechanics, 2014, 54(7):1293-1303.
[16] 赵继波, 李克武, 傅华, 等. 炸药与不同材料之间摩擦系数的研究[J]. 高压物理学报, 2014, 28(5):591-596.
ZHAO Ji-bo, LI Ke-wu, FU Hua, et al. Research on the friction coefficient between explosive and different materials[J]. Chinese Journal of High Pressure Physics, 2014, 28(5):591-596.(in Chinese)
[17] Sun B P, Duan Z P, Ma Z F, et al. Numerical simulation on frictional ignition of charge during projectile penetration[J]. Transaction of Beijing Institute of Technology, 2012, 32(8):771- 775.
[18] 王晔，白春华, 李建平. 弹壳体结构对燃料装药抛撒速率影响的数值模拟研究[J]. 兵工学报, 2017, 38(1):43-49.
WANG Ye, BAI Chun-hua, LI Jian-ping. Influence of shell structure on dispersing velocity of fuel-air mixture[J]. Acta Armamentarii , 2017, 38(1):43-49.(in Chinese)

[19] 吴林杰，侯海量，朱锡，等. 水下接触爆炸下防雷舱舷侧空舱的内压载荷特性仿真研究[J]. 兵工学报, 2017, 38(1):143- 150.
WU Lin-jie, HOU Hai-liang, ZHU Xi, et al. Numerical simulation on inside load characteristics of broadside cabin of defensive structure subjected to underwater contact explosion[J]. Acta Armamentarii, 2017, 38(1):143-150.(in Chinese)
[20] 丁力, 蒋建伟, 门建兵, 等. 爆炸成型弹丸成型过程中的断裂数值模拟及机理分析[J]. 兵工学报, 2017, 38(3):417-423.
DING Li, JIANG Jian-wei, MEN Jian-bing, et al. Numerical simulation and mechanism analysis of EFP's fracture in forming process[J]. Acta Armamentarii, 2017, 38(3):417-423.(in Chinese)
[21] 王晔，白春华, 李建平, 等. 非对称云雾爆炸超压场数值模拟[J]. 兵工学报, 2017, 38(5):910-916.
WANG Ye,BAI Chun-hua, LI Jian-ping, et al. Simulation of explosion overpressure distribution for non-symmetry cloud detonation[J]. Acta Armamentarii, 2017, 38(5):910-916.(in Chinese)
[22] 赵梓君, 毕世华. BIC实验的数值模拟研究[J]. 北京理工大学学报, 2015, 35(6):556-559.
ZHAO Zhi-jun, BI Shi-hua. Numerical simulation on ballistic impact chamber test[J]. Transactions of Beijing Institute of Technology, 2015, 35(6):556-559.(in Chinese)

[23] Gibbs T R, Popolato A, Baytos J F. LASL explosive property data[M]. Los Alamos, NM, US: University of California Press, 1980.

第38卷第10期2017 年10月兵工学报ACTA
ARMAMENTARIIVol.38No.10Oct. 2017

[1]	ZHOU Bojun， YU Chuanqiang， LIU Zhihao， KE Bing. Rapid Erection Technology and Verification of Special Vehicles Based on High-Voltage Energy Storage [J]. Acta Armamentarii, 2022, 43(7): 1488-1497.
[2]	GAO Yueguang, FENG Shunshan, LIU Yunhui, HUANG Qi. Initial Velocity Distribution of Fragments from Cylindrical Charge Shells with Different Thick End Caps [J]. Acta Armamentarii, 2022, 43(7): 1527-1536.
[3]	LI Shurui， DUAN Zhuoping， ZHENG Baohui， LUO Guan， HUANG Fenglei. Cylinder Test and Equation of State for DNAN-based Aluminized Melt-cast Explosive [J]. Acta Armamentarii, 2021, 42(7): 1424-1430.
[4]	LOU Wei-peng, ZHENG Chang-song, LI He-yan, CHEN Jian-wen, ZHANG Zhou-li, MA Yuan. Research on Critical Open and Close Pressures of an Oil Discharge Valve for High Speed Wet Shifting Clutch [J]. Acta Armamentarii, 2017, 38(9): 1665-1672.
[5]	WANG Xian-cheng, YANG Shao-qing, MA Ning, ZHAO Wen-zhu. Research on Wear Model for Cylinder Liners in Vehicle Diesel Engines under Dynamic Load [J]. Acta Armamentarii, 2017, 38(9): 1673-1680.
[6]	SUN Hao-ze, CHANG Tian-qing, WANG Quan-dong, KONG De-peng, DAI Wen-jun. Image Detection Method for Tank and Armored Targets Based on Hierarchical Multi-scale Convolution Feature Extraction [J]. Acta Armamentarii, 2017, 38(9): 1681-1691.
[7]	ZHANG Yu-yan, SUN Sha-sha, WANG Zhen-chun, CAO Hai-yao, ZHAN Zai-ji. Simulation and Measurement of Surface Transient Temperature Field of High-speed Current-carrying Armature [J]. Acta Armamentarii, 2017, 38(9): 1692-1698.
[8]	LI Chen-ming， HUAN Chao， SHI Huai-long. Optimal Fire Distribution of a Rocket Launcher against Area Target [J]. Acta Armamentarii, 2017, 38(9): 1699-1704.
[9]	LEI Juan-mian, ZHANG Jia-wei, TAN Zhao-ming. Influence of Boattail on the Magnus Effect of Spinning Non-finned Projectile at Small Angles of Attack [J]. Acta Armamentarii, 2017, 38(9): 1705-1715.
[10]	LI Ze, YAN Xiao-peng, LI Ping, HAO Xin-hong, WANG Jian-tao. Jamming Mechanism of Frequency Sweep Jamming to FM Doppler Fuze [J]. Acta Armamentarii, 2017, 38(9): 1716-1722.
[11]	ZHANG Hao-wei, XIE Jun-wei, ZHANG Zhao-jian, ZONG Bin-feng, CHEN Tang-jun. Task Scheduling of Phased Array Radar Based on Hybrid Adaptive Genetic Algorithm [J]. Acta Armamentarii, 2017, 38(9): 1761-1770.
[12]	LI Mao， HOU Hai-liang， ZHU Xi， HUANG Xiao-ming， LI Dian， CHEN Chang-hai， HU Nian-ming. Influence of Structural Interspace on Anti-penetration Performance of Para-aramid Fiber-reinforced Composite Armor System [J]. Acta Armamentarii, 2017, 38(9): 1797-1805.
[13]	WANG Jian, HAN Yan, WANG Li-ming, ZHANG Pi-zhuang, CHEN Ping. Estimation Method for Instantaneous Frequency of Echo Signal of Projectile in Bore [J]. Acta Armamentarii, 2017, 38(9): 1806-1814.
[14]	LIU Hai-ou, ZHANG Wen-sheng, XU Yi, ZHAO Zi-ye. Load Spectrum Compiling for Transmission Shaft of Tracked Vehicle Based on Kernel Density Estimation [J]. Acta Armamentarii, 2017, 38(9): 1830-1838.
[15]	JIANG Miao-wen , YAN Jian-zhuo, CHEN Ji-min. 3D Printing of Military Helmet Liner Structure Based on Topology Optimization [J]. Acta Armamentarii, 2017, 38(9): 1845-1853.