[1] Hauver G E, Netherwood P H, Benck R F, et al. Variation of target resistance during long-rod penetration into ceramics[C]∥Proceedings of 13th International Symposium on Ballistics. Stockholm, Sweden: Stockholm International Fairs, 1992: 257-264. [2] Hauver G E, Netherwood P H, Benck R F, et al. Ballistic performance of ceramic targets[C]∥Proceedings of Army Symposium on Solid Mechanics. Plymouth, MA, US: Army Materials Technology Laboratory, 1993: 23-34. [3] Lundberg P, Lundberg B. Transition between interface defeat and penetration for tungsten projectiles and four silicon carbide materials[J]. International Journal of Impact Engineering, 2005, 31(7): 781-792. [4] Lundberg P, Renstrm R, Lundberg B. Impact of conical tungsten projectiles on flat silicon carbide targets: transition from interface defeat to penetration[J]. International Journal of Impact Engineering, 2006, 32(11):1842-56. [5] Lundberg P, Renstrm R, Andersson O. Influence of length scale on the transition from interface defeat to penetration in unconfined ceramic targets[J]. Journal of Applied Mechanics, 2013, 80(3): 031804. [6] Holmquist T J, Johnson G R. Modeling prestressed ceramic and its effect on ballistic performance[J]. International Journal of Impact Engineering, 2005, 31(2):113-27. [7] Holmquist T J, Johnson G R. Response of silicon carbide to high velocity impact[J]. Journal of Applied Physics, 2002, 91(9):5858-5866. [8] LaSalvia J C. A physically-based model for the effect of microstructure and mechanical properties on ballistic performance[C]∥26th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures-A: Ceramic Engineering and Science Proceedings. Chichester, UK: John Wiley and Sons Ltd, 2009,23(3): 213-220. [9] LaSalvia J C, Leavy B, Miller H T, et al. Recent results on the fundamental performance of a hot-pressed silicon carbide impacted by sub-scale long-pod penetrators[C]∥Advances in Ceramic Armor IV: Ceramic Engineering and Science Proceedings. Chichester, UK: John Wiley and Sons Ltd, 2009,29(6): 89-97. [10] Anderson C E, Walker J D. An analytical model for dwell and interface defeat[J]. International Journal of Impact Engineering, 2005, 31(9): 1119-1132. [11] Anderson Jr C E, Holmquist T J, Orphal D L, et al. Dwell and interface defeat on borosilicate glass[J]. International Journal of Applied Ceramic Technology, 2010, 7(6): 776-786. [12] Anderson Jr C E, Behner T, Holmquist T J, et al. Interface defeat of long rods impacting oblique silicon carbide [R]. Warren, Michigan: US Army Tank Automotive Research, Development, and Engineering Center, 2011: 1-36. [13] Serjouei A. Modelling and analysis of bi-layer ceramic-metal protective structures[D]. Singapore: Nanyang Technological University, 2014. [14] Chi R, Serjouei A, Sridhar I,et al. Pre-stress effect on confined ceramic armor ballistic performance[J]. International Journal of Impact Engineering, 2015, 84:159-170. [15] Chi R, Serjouei A, Sridhar I,et al. Ballistic impact on bi-layer alumina/aluminium armor: a semi-analytical approach[J]. International Journal of Impact Engineering, 2013, 52(2):37-46. [16] 李继承, 陈小伟. 尖锥头长杆弹侵彻的界面击溃分析[J]. 力学学报,2011, 43(1):63-70. LI Ji-cheng, CHEN Xiao-wei. Theoretical analysis on the interface defeat of a conical-nosed projectile penetration[J]. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(1):63-70. (in Chinese) [17] 李继承, 陈小伟. 柱形长杆弹侵彻的界面击溃分析[J]. 爆炸与冲击,2011, 31(2):141-147. LI Ji-cheng, CHEN Xiao-wei. Theoretical analysis on the interface defeat of a long rod penetration[J]. Explosion and Shock Waves, 2011, 31(2):141-147. (in Chinese) [18] Li J C, Chen X W, Ning F. Comparative analysis on the interface defeat between the cylindrical and conical-nosed long rods[J]. International Journal of Protective Structures, 2014, 5(1):21-46. [19] Li J C, Chen X W, Ning F, et al. On the transition from interface defeat to penetration in the impact of long rod onto ceramic targets[J]. International Journal of Impact Engineering, 2015, 83: 37-46. [20] Meyers M A. Shock wave and hHigh-strain-rate phenomena in materials[M]∥Johnson G R, Holmquist T J. A computational constitutive model for brittle materials subjected to large strains, high strain rates and high pressures. New York: Marcel Dekker Inc , 1992: 1075-1081. [21] Johnson G R, Holmquist T J. An improved computational constitutive model for brittle materials[C]∥AIP Conference Proceedings.New York, US: American Institute of Physics, 1994:981-984 [22] Quan X, Clegg R A, Cowler M S, et al. Numerical simulation of long rods impacting silicon carbide targets using JH-1 model[J]. International Journal of Impact Engineering, 2006, 33(1):634-644. [23] Lee J K. Analysis of multi-layered materials under high velocity impact using CTH[J]. DTIC Document,2008,24:198. [24] Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 1985, 21(1):31-48. [25] Uth T, Deshpande V S. Unsteady penetration of a target by a liquid jet[J]. Proceedings of the National Academy of Sciences, 2013, 110(50): 20028-20033. [26] Han C, Sun C T. A study of pre-stress effect on static and dynamic contact failure of brittle materials[J]. International Journal of Impact Engineering, 2000, 24(6):597-611. [27] LaSalvia J C. Advances in ceramic armor IX: ceramic engineering and science proceedings[C]∥Gassman A H, Paris V, Levin L, et al. Effect of prestressing on the ballistic performance of alumina ceramics: experiments and modeling. New York: John Wiley & Sons Inc, 2013: 31-40. |