Welcome to Acta Armamentarii ! Today is Share:

Acta Armamentarii ›› 2021, Vol. 42 ›› Issue (12): 2693-2699.doi: 10.3969/j.issn.1000-1093.2021.12.017

• Paper • Previous Articles     Next Articles

Prediction of Wave-absorbing Coating Thickness of Airborne Conformal Antenna Based on Orthogonal Experimental Designand Regression Analysis

ZHANG Qingjun1,2, XIE Yin1,2, WU Song1,2   

  1. (1.Sichuan Jiuzhou Electric Group Co.,Ltd.,Mianyang 621000,Sichuan,China;2.Sichuan Avionics-System Laboratory of Lightweight Design and Manufacturing Engineering,Mianyang 621000,Sichuan,China)
  • Online:2022-01-15

Abstract: The wave-absorbing coating thickness has direct effect on the wave-absorbing performance of conformal antenna. 25 groups of spraying process parameter level combinations were designed using the orthogonal experimental design method. The corresponding wave-absorbing coating thickness data were obtained through 25 sets of wave-absorbing coating spraying experiments. The range analysis,variance analysis and nonlinear regression analysis were made for the thickness data of wave-absorbing coating. The result shows that the influences of spraying process parameters on the thickness of wave-absorbing coating are sorted in descending order:spraying speed> stepping distance> spraying distance> paint viscosity> spraying angle> spray gun air pressure. The spraying speed has a significant effect on the thickness of wave-absorbing coating. A regression model for predicting the thickness of wave-absorbing coating was established. It can accurately characterize the quantitative relationship among the wave-absorbing coating thickness and the spraying process parameters.

Key words: airborneconformalantenna, wave-absorbingcoatingthickness, sprayingprocessparameter, orthogonalexperiment, regressionanalysis

CLC Number: