Friction Model of Projectile Engraving Process Based on Temperature Correction
ZOU Libo1, YU Cungui1, FENG Guangbin1, HOU Baolin1, ZHONG Jianlin1, LIU Xianfu2
(1.School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China; 2.713th Research Institude, China State Shipbuilding Industry Corporation Limited, Zhengzhou 450045, Henan, China)
ZOU Libo, YU Cungui, FENG Guangbin, HOU Baolin, ZHONG Jianlin, LIU Xianfu. Friction Model of Projectile Engraving Process Based on Temperature Correction[J]. Acta Armamentarii, 2021, 42(6): 1148-1156.
MONTGOMERY R.Friction and wear at high sliding speeds[J]. Wear,1976,36(3): 275-298.[2] MONTGOMERY R.Surface melting of rotating bands[J].Wear,1976,38(2): 235-243.[3] MONTGOMERY R.Wear of projectile rotating bands[J].Wear,1985,101(4): 347-356.[4] PILCHER J O I,WINEHOLT E M.Analysis of the friction behavior at high sliding velocities and pressures for gilding metal,annealed iron,copper and projectile steel:AD-A035674[R].Aberdeen,MA,US:Ballistic Research Laboratories,1977.[5] MATSUYAMA T.Friction and wear mechanism at high sliding speeds[C]∥Proceedings of the 19th International Symposium of Ballistics. Interlaken,Switzerland:IBS,2001:7-11.[6] WU B,ZHENG J,TIAN Q T,et al.Tribology of rotating band and gun barrel during engraving process under quasi-static and dynamic loading[J].Friction,2014,2(4):330-342.[7] WU B,ZHENG J,TIAN Q T,et al.Friction and wear between rotating band and gun barrel during engraving process[J].Wear,2014,318(2):106-113.[8] ETTLES C.Heat generation and friction in rotating bands[J]. Tribology Transactions,1986,29(3):312-320.[9] STIFFLER A K.Friction of plastic rotating bands: AD-A150666[R].Eglin Air Force Base,FL,US:Air Force Armament Laboratory,1984.[10] PULS H,KLOCKE F,LUNG D. Experimental investigation on friction under metal cutting conditions[J].Wear,2014,310(2):63-71.[12] SHEN C,ZHOU K D,LU Y,et al. Modeling and simulation of bullet-barrel interaction process for damaged gun barrel[J].Defence Technology,2019,15(6): 972-986.[12] DING C J,LIU N,ZHANG X Y.A mesh generation method for worn gun barrel and its application in projectile-barrel interaction analysis[J].Finite Elements in Analysis and Design,2017,124:22-32.[13] ARNOUX J J,SUTTER G,LIST G,et al.Friction experiments for dynamical coefficient measurement[J].Advances in Tribology,2011(4): 613581.[14] SUTTER G,RANC N.Flash temperature measurement during dry friction process at high sliding speed[J].Wear, 2010,268(12):1237-1242. [15] LIST G, SUTTER G,ARNOUX J J,et al.Study of friction and wear mechanisms at high sliding speed[J].Mechanics of Materials,2014, 80(B):246-254.[16] 李明涛,崔万善,姚哲,等.基于内表面熔化层理论的身管寿命预测方法[J].火炮发射与控制学报,2009(2):5-7.LI M T,CUI W S,YAO Z, et al.Prediction method of barrel life based on inner side melting theory[J].Journal of Gun Launch & Control,2009(2): 5-7.(in Chinese)[17] 殷军辉,郑坚,倪新华,等.弹丸膛内运动过程中弹带塑性变形的宏观与微观机理研究[J].兵工学报,2012,33(6): 676-681. YIN J H,ZHENG J,NI X H,et al.Research on macroscopic and microscopic mechanism of plastic deformation of bearing band[J].Acta Armamentarii,2012,33(6):676-681.(in Chinese)[18] CHUNG D Y,SHIN N,OH M,et al.Prediction of erosion from heat transfer measurement of 40 mm gun tubes[J]. Wear,2007,263(6): 246-250.[19] BAHI S,NOUARI M,MOUFKI A,et al. Hybrid modelling of sliding-sticking zones at the tool-chip interface under dry machining and tool wear analysis[J].Wear,2011,286(11): 45-54.[20] BAHI S,NOUARI M,MOUFKI A,et al. A new friction law for sticking and sliding contacts in machining[J].Tribology International,2011,44(7/8):764-771.[21] 金文奇,冯三任,徐达.火炮身管寿命推断技术与工程实践[M].北京:国防工业出版社,2014: 186-192.JIN W Q,FENG S R,XU D.Extrapolation technology and engineering practice for gun barrel life in the approval test [M].Beijing: National Defense Industry Press,2014:186-192.(in Chinese)[22] LISOV M.Modeling wear mechanism of artillery projectiles rotating band using variable parameters of internal ballistic process[J].Scientific Technical Review,2006,56(2):11-16 .[23] JOHNSON G R,COOK W H.Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J].Engineering Fracture Mechanics,1985,21(1):31-48. [24] 李淼,钱林方,孙河洋.某大口径火炮弹带热力耦合挤进动力学数值模拟研究[J].兵工学报,2016,37(10):1803-1811.LI M,QIAN L F,SUN H Y.Research on coupled thermo-mecha- nical model during rotating band engraving process[J].Acta Armamentarii, 2016,37(10):1803-1811.(in Chinese)[25] 张小兵.枪炮内弹道学[M].北京:北京理工大学出版社,2014: 59-62.ZHANG X B. Interior ballistics of guns[M].Beijing: Beijing Institute of Technology Press,2014:59-62.(in Chinese)