Welcome to Acta Armamentarii ! Today is Share:

Acta Armamentarii ›› 2021, Vol. 42 ›› Issue (1): 74-82.doi: 10.3969/j.issn.1000-1093.2021.01.008

• Paper • Previous Articles     Next Articles

Modeling on Exposed Area of Suppressing Jamming Based on Radar Antenna Beam Pattern

XIA Dong1, WANG Shouquan1, BAO Zhonghua2, CAO Yunhe3   

  1. (1.Qingdao Campus, Naval Aeronautics University, Qingdao 266041, Shandong, China; 2.School of Electronic Engineering, Naval University of Engineering, Wuhan 430033, Hubei, China; 3.National Key Laboratory of Radar Signal Processing, Xidian University, Xi'an 710071, Shaanxi, China)
  • Online:2021-03-11

Abstract: Current radar exposed area model is imprecise as the influnce of antenna beam pattern needs to be considered. In order to implement the optimized penetrating strategy of protected targets, the radar antenna beam pattern was introduced in calculating burn-through distance, and a new radar exposed area model modified by radar antenna beam pattern was built. On basis of analysis of the new model,the penetrating strategy of protected targets when radar is interfered by just one jammer is presented, in which the penetrating direction should be selected at radar antenna sidelobes' maximum. Radar exposed area of moving platform under suppressing jamming of multiple jammers was simulated and analyzed, and a targets penetrating strategy with multiple jammers was built. When an angle between multiple jammer and radar is less than a certain value and equal to the angles corresponding to radar antenna sidelobes' maximum, the radar exposed area has few glitches, which leads to good suppressing effect with wide scope of penetrating direction. The simulated results show that burn-through distance obtained by the proposed model varying with directions is consistent with experimental results.

Key words: suppressingjamming, antennabeampattern, burn-throughdistance, radarexposedarea, penetratingdirection

CLC Number: