[1] 刘修骥. 车辆传动系统分析[M]. 北京:国防工业出版社,1998. LIU X J. Analysis of vehicle transmission[M]. Beijing: National Defense Industry Press, 1998. (in Chinese) [2] MACOR A, ROSSETTI A. Optimization of hydro-mechanical power split transmissions[J]. Mechanism and Machine Theory, 2011, 46(12): 1901-1919. [3] ROSSETTI A, MACOR A. Multi-objective optimization of hydro-mechanical power split transmissions[J]. Mechanism and Machine Theory, 2013, 62(12): 112-128. [4] MACOR A, ROSSETTI A. Fuel consumption reduction in urban buses by using power split transmissions[J]. Energy Conversion and Management, 2013,71: 159-171. [5] 刘立明. 日本10式主战坦克[J]. 国外坦克,2010(12):23-32. LIU L M. Japanese type 10 main battle tank[J]. Foreign Tank, 2010(12): 23-32. (in Chinese) [6] 夏海南,葛建人,陈明宏. 液压机械传动在工程机械上的应用[J]. 工程机械,2000,31(3):17-19. XIA H N, GE J R, CHEN M H. Application of hydraulic drive on construction machinery[J]. Construction Machinery and Equipment, 2000, 31(3): 17-19. (in Chinese) [7] 苑士华,杜玖玉,胡纪滨,等. 两段式分速汇矩式液压机械传动设计[J]. 农业工程学报,2008,24(11):109-113. YUAN S H, DU J Y, HU J B, et al. Design of two-range input split hydrostatic mechanical transmission[J]. Transactions of the CSAE, 2008, 24(11): 109-113. (in Chinese) [8] 杜玖玉,苑士华,魏超,等. 双模式液压机械传动工作特性分析[J]. 农业工程学报,2009,25(4):86-90. DU J Y, YUAN S H, WEI C, et al. Performance analysis of dual mode hydro-mechanical transmission[J]. Transactions of the CSAE, 2009, 25(4): 86-90. (in Chinese) [9] 徐立友,周志立,彭巧励,等. 多段式液压机械无级变速器方案设计与特性分析[J]. 中国机械工程,2012,23(21):2641-2645. XU L Y, ZHOU Z L, PENG Q L, et al. Drive scheme design and characteristic analysis of multi-range hydro- mechanical CVT [J]. China Mechanical Engineering, 2012, 23(21): 2641-2645. (in Chinese)
[10] 张明柱,周志立,徐立友,等. 农业拖拉机用多段液压机械无级变速器设计[J]. 农业工程学报,2003,19(6):118-121. ZHANG M Z, ZHOU Z L, XU L Y, et al. Design of a multi-range hydrostatic mechanical transmission for farm tractors[J]. Transactions of the CSAE, 2003, 19(6): 118-121. (in Chinese) [11] 王光明,朱思洪,史立新,等. 拖拉机液压机械无级变速箱效率特性的仿真与试验[J]. 农业工程学报,2013,29(15):42-48. WANG G M, ZHU S H, SHI L X, et al. Simulation and experiment on efficiency characteristics of hydraulic mechanical continuously variable transmission for tractor[J]. Transactions of the CSAE, 2013, 29(15): 42-48. (in Chinese) [12] ZHANG Q, SUN D Y, QIN D T. Optimal parameters design method for power reflux hydro- mechanical transmission system[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2019, 233(3): 585-594. [13] LIU X J, SUN D Y, QIN D T, et al. Multi-objective design optimization of power-cycling hydrodynamic mechanical transmissions[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2019, 233(4): 1392-1410. [14] KAN Y Z, SUN D Y, LUO Y, et al. Optimal design of power matching for wheel loader based on power reflux hydraulic transmission system[J]. Mechanism and Machine Theory, 2019, 137: 67-82. [15] 魏超,苑士华,胡纪滨,等. 等差式液压机械无级变速器的速比控制理论与试验研究[J]. 机械工程学报,2011,47(16):101-105. WEI C, YUAN S H, HU J B, et al. Theoretical and experimental investigation of speed ratio follow-up control system on geometric type hydro-mechanical transmission[J]. Journal of Mechanical Engineering, 2011, 47(16): 101-105. (in Chinese) [16] 胡纪滨,魏超,杜玖玉,等. 液压机械无级变速器速比跟踪控制系统研究[J]. 北京理工大学学报,2008,28(6):481-485. HU J B, WEI C, DU J Y, et al. A study on the speed ratio follow-up control system of hydro-mechanical transmission[J]. Transactions of Beijing Institute of Technology, 2008, 28(6): 481-485. (in Chinese) [17] 王光明,朱思洪,王胜红,等. 拖拉机液压机械无级变速器的速比控制[J]. 农业工程学报,2013,29(7):17-23. WANG G M, ZHU S H, WANG S H, et al. Speed ratio control of tractor hydraulic mechanical CVT[J]. Transactions of the CSAE, 2013, 29(7): 17-23. (in Chinese) [18] 郭占正,苑士华,荆崇波,等. 基于AMESim的液压机械无级传动换段过程建模与仿真[J]. 农业工程学报,2009,25(10): 86-90. GUO Z Z, YUAN S H, JING C B, et al. Modeling and simulation of shifting process in hydraulic machinery stepless transmission based on AMESim[J]. Transactions of the CSAE, 2009, 25(10): 86-90. (in Chinese) [19] 苑士华,魏超,张银彩. 液压机械无级变速器动态特性的影响因素研究[J]. 农业工程学报,2008,24(2):33-37. YUAN S H, WEI C, ZHANG Y C. Influencing factors for dynamic characteristics of hydro-mechanical continuously variable transmission[J]. Transactions of the CSAE, 2008, 24(2): 33-37. (in Chinese) [20] 苑士华,魏超,胡纪滨. 排量伺服系统对液压机械无级变速器动态特性的影响[J].农业机械学报,2008,39(7):27-31. YUAN S H, WEI C, HU J B. Influence of displacement servo system on dynamic behavior of hydro-mechanical transmission[J]. Transactions of the Chinese Society for Agricultural Machinery, 2008, 39(7): 27-31. (in Chinese) [21] 魏超,马志远,尹旭峰,等. 液压机械无级变速器换段冲击影响因素研究[J]. 北京理工大学学报,2015,35(11):1122-1127. WEI C, MA Z Y, YIN X F, et al. Research on the influencing factors of the range-shifting impact on HMT[J]. Transactions of Beijing Institute of Technology, 2015, 35(11): 1122-1127. (in Chinese) [22] 倪向东,朱思洪,张海军,等. 液压机械无级变速器换段品质影响因素试验[J]. 农业机械学报,2013,44(6):29-34. NI X D, ZHU S H, ZHANG H J, et al. Experiment of shift quality factors for hydro- mechanical CVT[J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(6): 29-34. (in Chinese) [23] 王光明,张晓辉,朱思洪,等. 拖拉机液压功率分流无级变速器换段规律研究[J]. 农业机械学报,2015,46(10):7-15. WANG G M, ZHANG X H, ZHU S H, et al. Shift performance of tractor hydraulic power-split continuously variable transmission[J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(10): 7-15. (in Chinese) [24] 王光明,张晓辉,朱思洪,等. 拖拉机液压机械无级变速箱换段过程液压故障诊断[J]. 农业工程学报,2015,31(6):25-34. WANG G M, ZHANG X H, ZHU S H, et al. Hydraulic failure diagnosis of tractor hydro-mechanical continuously variable transmission in shifting process[J]. Transactions of the CSAE, 2015, 31(6): 25-34. (in Chinese) [25] 王光明,朱思洪,史立新,等. 拖拉机液压机械无级变速箱换段控制优化与试验[J]. 农业工程学报,2013,29(18):51-59. WANG G M, ZHU S H, SHI L X, et al. Experimental optimization on shift control of hydraulic mechanical continuously variable transmission for tractor[J]. Transactions of the CSAE, 2013, 29(18): 51-59. (in Chinese) [26] 杨树军,焦晓娟,鲍永,等. 油液含气量对液压机械换段性能的影响[J]. 机械工程学报,2015,51(14):122-130. YANG S J, JIAO X J, BAO Y, et al. Fluid air content affecting the power shift performance of the hydro-mechanical variable transmission[J]. Journal of Mechanical Engineering, 2015, 51(14): 122-130. (in Chinese) [27] HU J B, WEI C, YUAN S H, et al. Characteristics on hydro-mechanical transmission in power shift process[J]. Chinese Journal of Mechanical Engineering (English Edition), 2009, 22(1): 50-56. [28] 杨树军,鲍永,范程远,等. 液压机械全功率换段方法及功率过渡特性[J]. 农业工程学报,2018,34(5):63-72. YANG S J, BAO Y, FAN C Y, et al. Full power shift method of hydro-mechanical transmission and power transition characteristics[J]. Transactions of the CSAE, 2018, 34(5): 63-72. (in Chinese) [29] YANG S J, BAO Y, FAN C Y, et al. Study on characteristics of hydro-mechanical transmission in full power shift[J]. Advances in Mechanical Engineering, 2018, 10(7): 1-13. [30] 杨树军,鲍永,张曼,等. 液压机械全功率换段时机的非对称偏差特性[J]. 兵工学报,2019,40(9): 1770-1780. YANG S J, BAO Y, ZHANG M, et al. Asymmetric deviation characteristics of hydro-mechanical transmission full shift timing[J]. Acta Armamentarii, 2019, 40(9): 1770-1780.(in Chinese) [31] 冯斌. 液压油有效体积弹性模量及测量装置的研究[D]. 杭州:浙江大学,2011. FENG B. Study of effective fluid bulk modulus and measurement in hydraulic systems[D]. Hangzhou: Zhejiang University, 2011. (in Chinese) [32] 王静. 大流量液压源恒温恒压控制及油液弹性模量研究[D]. 杭州:浙江大学,2008. WANG J. Study on oil bulk modulus and temperature and pressure control in hydraulic source with high flow[D]. Hangzhou: Zhejiang University, 2008. (in Chinese) [33] 王静,龚国芳,杨华勇. 油液体积模量的研究与在线测量[J]. 机械工程学报,2009,45(7): 120-125. WANG J, GONG G F, YANG H Y. Research and online measurement of bulk modulus of hydraulic oil[J]. Journal of Mechanical Engineering, 2009, 45(7): 120-125. (in Chinese) [34] 薛晓虎,杜金凤. 柱塞泵效率特性的分析和研究[J]. 液压与气动,2003(12):43-46. XUE X H, DU J F. Analysis and study on the efficiency characteristics of piston pumps[J]. Hydraulic and Pneumatic, 2003(12): 43-46. (in Chinese)
第41卷第6期2020 年6月 兵工学报ACTA ARMAMENTARII Vol.41No.6Jun.2020
|