Research on Reliability Analysis of Multi-state System Based on UGF and GO Methodology

doi:10.3969/j.issn.1000-1093.2020.04.018

Abstract

Abstract: To solve the complex reliability analysis problem of basic GO methodology, a UGF-GO methodology based on the universal generating function (UGF) and GO methodology is proposed to analyze the reliability of complex multi-state system. The proposed methodology can be used to analyze the structure relation among various operators in GO chart and obtain the system reliability based on the corresponding universal generating function (UGF). The UGF-GO methodology can not only reduce the computational complexity of GO chart, but also simplify the correction process of shared signals. The simplicity and effectiveness of UGF-GO methodology are proved by comparing the reliability analyses of UGF-GO methodology and probability formula algorithm. The UGF-GO methodology is applied to analyze the degradation reliability of an aircraft power supply system. The simulated results show that UGF-GO methodology can be used completely to analyze the reliability of system with degradation behavior from failure mechanism to degeneration modeling. Key

Key words: multi-statesystem, GOmethodology, sharedsignal, universalgeneratingfunction, reliability

CLC Number:

TB114.33

CAO Hui， DUAN Fuhai， JIANG Xiuhong. Research on Reliability Analysis of Multi-state System Based on UGF and GO Methodology[J]. Acta Armamentarii, 2020, 41(4): 792-798.

References

［1］ RACHWITZ R. Reliability analysis—a review and some perspectives[J]. Structural Safety, 2001, 23(4):365-395.
[2］ SHEN Z P, GAO J, HUANG X R. A new quantification algorithm for the GO methodology [J]. Reliability Engineering & System Safety, 2000, 67(3):241-247.
[3］杜彦斌, 李聪波, 刘世豪. 基于GO法的机床再制造工艺过程可靠性分析方法[J]. 机械工程学报, 2017, 53(11):203-210.
DU Y B, LI C B, LIU S H. Reliability assessment method of remanufacturing process for machine tools based on GO method[J]. Journal of Mechanical Engineering, 2017, 53(11):203-210. (in Chinese)
[4］胡爱玲, 江秀红. GO法在惯导系统可靠性评估中的应用[J]. 沈阳航空航天大学学报, 2016, 33(1):54-59.
HU A L, JIANG X H. Application of GO methodology on reliability assessment of the inertial navigation system[J]. Journal of Shen-yang Institute of Aeronautical Engineering, 2016, 33(1):54-59.(in Chinese)
[5］兰雪, 段富海, 桑勇. GO-FLOW法在飞机EHA可靠性分析中的应用[J]. 北京航空航天大学学报, 2017, 43(6):1264-1270.
LAN X，DUAN F H，SANG Y. Application of GO-FLOW methodo-logy in reliability analysis of aircraft EHA [J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(6):1264-1270． (in Chinese)
[6］赵峰, 梁丽, 王思华. 基于GO-FLOW法的高速铁路接触网系统可靠性分析[J]. 电工技术学报, 2015, 30(12):351-356.
ZHAO F, LIANG L, WANG S H. A reliability evaluation of high speed railway overhead contact systems based on the GO-FLOW methodology[J]. Transactions of China Electrotechnical Society, 2015, 30(12):351-356. (in Chinese)
[7］沈祖培，黄祥瑞. GO法原理及应用:一种系统可靠性分析方法[M]. 北京: 清华大学出版社，2004.
SHEN Z P, HUANG X R. Principle and application of GO methodology： a system reliability analysis methodology [M]. Beijing: Tsinghua University Press, 2004.(in Chinese)
[8］ MATSUOKA T, KOBAYASHI M. The GO-FLOW reliability analysis methodology-analysis of common cause failures with uncertainty[J]. Nuclear Engineering and Design, 1997, 175(3):205-214.
[9］ ZHOU L G, DONG H P, YI X J, et al. Reliability analysis of retracting actuator with multi-state based on goal oriented methodology[J]. Journal of Shanghai Jiaotong University (Science), 2015, 20(3):307-311.

[10］王海朋，段富海，江秀红. 基于模糊GO法的惯性导航系统可靠性研究[J]. 大连理工大学学报, 2018, 58(3):285-292.
WANG H P, DUAN F H, JIANG X H. Research on reliability of inertial navigation system based on fuzzy GO methodology[J]. Journal of Dalian University of Technology, 2018, 58(3):285-292. (in Chinese)
[11］ JIANG X H, DUAN F H, TIAN H, et al. Optimization of reliability centered predictive maintenance scheme for inertial navigation system[J]. Reliability Engineering & System Safety, 2015, 140:208-217.
[12］江秀红, 段富海, 胡爱玲. 一种新型GO法操作符及其在多态系统中的应用[J]. 兵工学报, 2019, 40(4):857-864.
JIANG X H, DUAN F H, HU A L. A new GO operator and its application in multi-state system[J]. Acta Armamentarii, 2019, 40(4):857-864. (in Chinese)
[13］ REN Y, ZENG C C, FAN D M, et al. Multi-state reliability assessment method based on the MDD-GO model[J]. IEEE Access, 2018, 6:5151-5161.
[14］ GU Y K, LI J. Multi-state system reliability: a new and systematic review[J]. Procedia Engineering, 2012, 29:531-536.
[15］ LISNIANSKI A, LEVITIN G, HANOCH B H, et al. Power system structure optimization subject to reliability constraints[J]. Electric Power Systems Research, 1996, 39(2):145-152.
[16］ LISNIANSKI A, LEVITIN G. Multi-state system reliability: assessment, optimization and applications[M]. Singapore: World Scientific Publishing Company, 2003.
[17］ LISNIANSKI A, YI D. Redundancy analysis for repairable multi-state system by using combined stochastic processes methods and universal generating function technique[J]. Reliability Engineering & System Safety, 2009, 94(11):1788-1795.
[18］ LARSEN E M, DING Y, LI Y F, et al. Definitions of genera-lized multi-performance weighted multi-state, K^--out-of-n, system and its reliability evaluations[J/OL]. Reliability Engineering & System Safety, 2017: 105876(2017-06-21)[2019-06-20]. https:∥doi.org/10.1016/j.ress.2017.06.009.
[19］ LEVITIN G. The universal generating function in reliability ana-lysis and optimization[M]. London, UK: Springer, 2005.
[20］ WANG G J, DUAN F J, ZHOU Y F. Reliability evaluation of multi-state series systems with performance sharing[J]. Reliabi-lity Engineering & System Safety, 2018, 173:58-63.
[21］ LEVITIN G. A universal generating function approach for the analysis of multi-state systems with dependent elements[J]. Reliability Engineering & System Safety, 2004, 84:285-292.
[22］ MOIR I, SEABRIDGE A G, JUKES M. Military avionics systems[M]. Hoboken, NJ, US: John Wiley & Sons Inc., 2007.

第41卷第4期2020 年4月
兵工学报ACTA ARMAMENTARII
Vol.41No.4Apr.2020

[1]	LIU Qin， JI Guangzhen， CAO Pulin， LI Juan， LIU Ying. Reliability Design and Analysis Methodfor Complex Mechanical System Based on Physics of Failure [J]. Acta Armamentarii, 2022, 43(S1): 189-195.
[2]	ZHAO Jian， ZHANG Liang， LI Aoran， FENG Yu， ZHANG Yu， LIU Rui， LI Yi， LI Xinyong， ZHU Zhenlei. Reliability Index Distribution of Armored Equipment Based on System Engineering Method [J]. Acta Armamentarii, 2022, 43(S1): 196-202.
[3]	LIU Lin， GONG Chen， LI Mengmeng， WANG Ran. RMSST Design Based on Virtual Reality [J]. Acta Armamentarii, 2022, 43(S1): 208-213.
[4]	LI Jingkui， LIN Wenjie， JIANG Xiuhong， LU Yuze. Reliability Analysis of Aircraft Fuel Closed-loop Control System Based on GO Methodology and Markov Process [J]. Acta Armamentarii, 2022, 43(6): 1447-1455.
[5]	DING Li， GU Jiahui， ZHOU Jinyu， KANG Shaopeng， CHEN Yifei， LI Ziyi. Kinematic Reliability Analysis for Redundant Robots Based on Envelope Method [J]. Acta Armamentarii, 2022, 43(6): 1426-1434.
[6]	JI Ming， BU Junjun， MA Cong. Maximum Entropy Test Method for Evaluating the Output Reliability of Space Actuators [J]. Acta Armamentarii, 2022, 43(4): 919-923.
[7]	JIANG Xiuhong， LI Jiaxin， LIU Yanjuan， WANG Yuying. Reliability Analysis of Electric Aircraft Drive System with Feedback Loop [J]. Acta Armamentarii, 2022, 43(2): 451-457.
[8]	WANG Bo, JIANG Ping, GUO Bo. Reliability Evaluation of Aerospace Valves Based on Multi-source Information Fusion [J]. Acta Armamentarii, 2022, 43(1): 199-206.
[9]	QIU Jiwei, LUO Haisheng. Self-adaptive Conjugate Nonlinear Approximation Method for Structural Reliability Analysis [J]. Acta Armamentarii, 2021, 42(3): 648-654.
[10]	HU Tingchun， SUN Yufeng， ZHAO Guangyan. A Method for Taking Values of Equipment Reliability Design Assurance Coefficient [J]. Acta Armamentarii, 2021, 42(12): 2753-2761.
[11]	CHEN Pengfei, HE Peng, YU Tailong, LIU Qiaoling. An Analysis Method for Nonlinear Structural Reliability Based on Gradient Search Method [J]. Acta Armamentarii, 2021, 42(1): 175-184.
[12]	WANG Liwei， CAI Jinyan， XU Chengzhi， ZHU Sai. Self-repair Strategy of Wire Fault Tolerance in Embryonic Electronic Array [J]. Acta Armamentarii, 2020, 41(9): 1848-1860.
[13]	YANG Zhiyuan, ZHAO Jianmin, CHENG Zhonghua, LI Liying, CHI Kuo. Reliability Model of Competing Failure System with Dependent Degradation [J]. Acta Armamentarii, 2020, 41(7): 1423-1433.
[14]	NIU Yueting ， ZHAO Hui， LI Yan， MU Xihui， ZHANG Guozhi. Sampling Method of High Value Ammunition Based on Weibull Life Distribution [J]. Acta Armamentarii, 2020, 41(7): 1434-1440.
[15]	BIAN Ruibing， ZHANG Yang， PAN Zhengqiang， CHENG Zhijun， BAI Senyang. Reliability Analysis of Phased-mission System of Systems for Escort Formation Based on BDD [J]. Acta Armamentarii, 2020, 41(5): 1016-1024.