Experimental Research on the Effect of Anisotropic Properties of Composite Material on Bubble Shape

doi:10.3969/j.issn.1000-1093.2019.11.012

Abstract

Abstract: In order to study the effect of anistropic properties of composite material on bubble shape, the shapes of bubbles near the carbon fiber composite material boundaries and the deformation of the carbon fiber composite material boundaries were recorded and observed by using high-speed camera. The shapes of bubbles near the composite material boundaries with different ply angles are studied. The changing processes of bubble shape and the deformation modes of the composite material boundaries at the same initial distance of bubble from the boundary are compared for the carbon fiber composite plates with the ply angles of 0°,90° and 0°+90°. The results show that the high-speed jet and shock wave generated by the collapse of bubble near the boundaries are the important factors for the damage of boundaries, and the different ply angles of carbon fiber composite material lead to different deformation modes, which has an important impact on the shapes of bubbles. Key

Key words: compositematerial, bubbleshape, plyangle, anisotropicproperty

CLC Number:

TJ630.1

CHANG Qing, ZHANG Mindi, MA Xiaojian, HUANG Biao, HUANG Guohao. Experimental Research on the Effect of Anisotropic Properties of Composite Material on Bubble Shape[J]. Acta Armamentarii, 2019, 40(11): 2272-2282.

References

［1］ HUANG B, ZHAO Y, WANG G Y. Large eddy simulation of turbulent vortex-cavitation interactions in transient sheet/cloud cavitating flows［J］. Computers & Fluids, 2014, 92:113-124.
［2］ MA X J, HUANG B, WANG G Y, et al. Numerical simulation of the red blood cell aggregation and deformation behaviors in ultrasonic field［J］. Ultrasonics Sonochemistry, 2017, 38: 604-613.
［3］ HUANG B, YOUNG Y L, WANG G Y, et al. Combined experimental and computational investigation of unsteady structure of sheet/cloud cavitation［J］. Fluids Eng, 2013, 135 (7): 071301.
［4］ HUANG B, WANG G Y, YUAN H T, et al. A cavitation model for cavitating flow simulations［J］. Journal of Hydrodynamics Hydrodyn Ser,B, 2010, 22(5): 798-804.
［5］ MA X J, HUANG B, WANG G Y, et al. Numerical investigation of the dynamic response of composite material subjected to bubble collapse［J］. WIT Transactions on Engineering Sciences, 2017, 115: 43-52.
［6］ MA X J, HUANG B, ZHAO X, et al. Comparisons of spark-charge bubble dynamics near the elastic and rigid boundaries［J］. Ultrasonics Sonochemistry, 2018, 43:80-90.
［7］ RAYLEIGH L. On the pressure developed in a liquid during the collapse of a spherical cavity［J］. Magister Philosophiae, 1919, 34: 94-98.
［8］ VOGEL A, LAUTERBORN W, TIMM R. Optical and acoustic investigations of the dynamics of laser-produced cavitation bubbles near a solid boundary［J］. Journal of Fluid Mechanics, 1989, 206: 299-338.
［9］ BENJAMIN T B, ELLIS A T. The collapse of cavitation bubbles and the pressures thereby produced against solid boundaries［J］. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1966,260(1110): 221-240.

［10］ LAUTERBORN W, BOLLE H. Experimental investigations of cavitation-bubble collapse in the neighbourhood of a solid boundary［J］. Journal of Fluid Mechanics, 1975, 72(2): 391-399.
［11］ BLAKE J R, GIBSON D C. Cavitation bubbles near boundaries［J］. Annual Review of Fluid Mechanics,1987, 19(1) 99-123.
［12］ SHIMA A, TOMITA Y, GIBSON D C, BLAKE J R. The growth and collapse of cavitation bubbles near composite surfaces［J］. Journal of Fluid Mechanics, 1989, 203:199-214.
［13］ TOMITA Y, SHIMA A. Mechanisms of impulsive pressure generation and damage pit formation by bubble collapse［J］. Journal of Fluid Mechanics, 1986, 169:535-564.
［14］ ZHANG S, WANG S P, ZHANG A M. Experimental study on the interaction between bubble and free surface using a high-voltage spark generator［J］. Physics of Fluids, 2016, 28(3): 032109.
［15］ TURANGAN C K, ONG G P, KLASEBOER E, KHOO B C. Experimental and numerical study of transient bubble-elastic membrane interaction［J］. Journal of Applied Physics, 2006, 100:054910-054917.
［16］ BRUJAN E A, NAHEN K, SCHMIDE P, et al. Dynamics of laser-induced cavitation bubbles near an elastic boundary［J］. Journal of Fluid Mechanics, 2001, 433: 251-281.
［17］张可达. 碳纤维复合材料［J］. 材料导报, 1993(1):59-62.
ZHANG K D. Carbon fiber composites［J］. Materials Report, 1993(1): 59-62. (in Chinese)
［18］张风翻. 树脂增韧及韧性复合材料［J］. 材料工程, 1995(5): 3-6.
ZHANG F F. Resin toughened and toughened composites ［J］. Material Engineering, 1995 (5): 3-6. (in Chinese)
［19］侯军生. 树脂基纤维增强复合材料的无上盖板成形［J］. 航空工艺技术, 1995(4): 24-26.
HOU J S. Forming of resin-based fiber reinforced composites without upper cover［J］. Aviation Technology,1995(4):24-26.(in Chinese)
［20］ ZHANG H Z, WU Q, LI Y P, et al. Numerical investigation of the deformation characteristics of a composite hydrofoil with different ply angles［J］. Ocean Engineering, 2018, 163:348-357.
［21］ SHIMA A, TOMITA Y, GIBSON D C, et al. The growth and collapse of cavitation bubbles near composite surfaces［J］. Journal of Fluid Mechanics , 1989, 203: 199-214.
［22］ TOMITA Y, KODAMA T. Interaction of laser-induced cavitation bubbles with composite surfaces［J］. Journal of Applied Physics, 2003, 94(5): 2809-2816.
［23］ YOUNG Y L, LIU Z, XIE W. Fluid-structure and shock-bubble interaction effects during underwater explosions near composite structures［J］. Journal of Applied Mechanics, 2009, 76(5):911-914.
［24］ GONG S W, KLASEBOER E. Interaction between collapsing bubble and viscoelastic solid: numerical modelling and simulation［J］. Applied Mathematical Modelling, 2016, 40(7/8): 4746-4764.
［25］ GONG S W, OHL S W, KLASEBOER E, et al. Interaction of a spark-generated bubble with a two-layered composite beam［J］. Journal of Fluids and Structures, 2018, 76: 336-348.
［26］张阿漫，王诗平，白兆宏，等. 不同环境下气泡脉动特性实验研究［J］．力学学报， 2011， 43(1): 71-83.
ZHANG A M，WANG S P，BAI Z H, et al. Experimental study on bubble pulse features underwater different circumstance［J］. Chinese Journal of Theoretical and Applied Mechanics，2011，43(1): 71-83．(in Chinese)

第40卷
第11期2019 年11月兵工学报ACTA
ARMAMENTARIIVol.40No.11Nov.2019

[1]	YUAN Ye, WANG Liyan, CAO Zhanwei, NIE Chunsheng, NIE Liang, MA Haojun. Experimental Research on the Influence of Ablation Product of Carbon Fiber Reinforced Composite Material on the PlasmaFlow Field Characteristics [J]. Acta Armamentarii, 2020, 41(2): 298-304.
[2]	LI Bin, PANG Yong-jie, ZHU Xiao-meng, CHENG Yan-xue. 6σ Optimization Design of Ring-stiffened Composite Pressure Hull of Underwater Vehicle [J]. Acta Armamentarii, 2018, 39(6): 1171-1177.
[3]	LI Jun-bao, LI Wei-bing, CHENG Wei, WANG Xiao-ming, LI Wen-bin, HONG Xiao-wen. Mechanical Properties and Constitutive Model of Aluminum Powder/Rubber Composites [J]. Acta Armamentarii, 2018, 39(6): 1186-1194.
[4]	WANG Fang, JIANG Jian-wei, MEN Jian-bing. A Penetration Model for Tunsgsten-copper Shaped Charge Jet with Non-constant Density [J]. Acta Armamentarii, 2018, 39(12): 2289-2297.
[5]	LIAO Yu, SHI Shao-qing, LIANG Chao-ke, WANG Wen-kang. Dynamics Performances of Polyurea-woven Fiberglass Mesh Composite Reinforced Steel Plate Subjected to Shock Waves [J]. Acta Armamentarii, 2018, 39(10): 1988-1996.
[6]	MA Run-bo, DONG Li-hong, WANG Hai-dou, XING Zhi-guo. Research on Contact Fatigue Life Prediction of Thermally Sprayed Coating Based on Central Composite Design [J]. Acta Armamentarii, 2017, 38(3): 561-567.
[7]	ZHANG Xue-hui， XIE Chen-zhen, LI Xiao-xian， LIU Wei-jiang， YANG Kai， JIANG Miao， ZHU Sheng-jian. Research on Annealing Behaviors of Al₂O₃-Dispersion Strengthened Copper [J]. Acta Armamentarii, 2017, 38(11): 2220-2225.