Simulation Analysis on the Stress and Fatigue Life of a Special Equipment's Wire Rope

doi:10.3969/j.issn.1000-1093.2018.04.020

Abstract

Abstract: The stress and fatigue life of 6×36 WS wire rope of a special equipment under axial tension and the bending state around the pulley are studied to analyze the stress distribution and fatigue failure of steel wire rope during the working process. A finite element model of the steel wire rope is established，and the stress distribution under the axial tension and the bending state around the pulley are simulated and analyzed. Then the fatigue test of the steel wire is carried out to obtain the fatigue life data. Based on the fatigue data of the steel wire and the finite element analysis results of the rope，the fatigue life simulation analysis of the wire rope is carried out according to Miner linear accumulated damage theory. The results show that the stress of steel wire rope is larger in the contact areas of the adjacent wires and rope strands, and the contact area between wire rope and pulley. The greater the stress is，the shorter the fatigue life is. Key

Key words: steelwirerope, finiteelement, stress, Minertheorem, fatiguelife

CLC Number:

V553.1⁺9

DU Wen-zheng, MA Bao-zhu, CAO Da-zhi. Simulation Analysis on the Stress and Fatigue Life of a Special Equipment's Wire Rope[J]. Acta Armamentarii, 2018, 39(4): 798-809.

References

［1］刘小正. 起重机钢丝绳特点及维护方法探讨［J］. 中国新技术新产品,2015(16):45.
LIU Xiao-zheng. Discussion on the characteristics and maintenance methods of crane steel wire rope［J］. China New Technologies and Products, 2015(16):45.(in Chinese)
［2］刘修海, 吴天成, 张志高,等. 港机用钢丝绳生产及应用［J］. 金属制品, 2016, 42(1):13-16.
LIU Xiu-hai, WU Tian-cheng, ZHANG Zhi-gao, et al. Production and application of steel wire rope for port machinery［J］. Metal Products, 2016, 42(1):13-16. (in Chinese)
［3］王建波, 邱郡. 钢丝绳失效致起重伤害事故分析及预防［J］. 科技信息, 2011(16): 383.
WANG Jian-bo, QIU Jun. Accident analysis and prevention of hoisting injury caused by failure of wire rope［J］. Science & Technology Information, 2011(16): 383. (in Chinese)
［4］陈向阳, 张瑾, 唐文亭. 1×7+IWS结构钢丝绳服役中的有限元模拟［J］. 铸造技术, 2014, 35(4): 676-678.
CHEN Xiang-yang, ZHANG Jin, TANG Wen-ting. Finite element simulation of 1×7+IWS steel wire ropes in service［J］. Foundry Technology, 2014, 35(4): 676-678.(in Chinese)
［5］杜文正, 马保珠, 曹大志, 等. 摩擦因数对钢丝绳应力和疲劳寿命的影响分析［J］. 工矿自动化, 2017, 43(3):43-47.
DU Wen-zheng, MA Bao-zhu, CAO Da-zhi, et al. Analysis of affection of friction factor on stress and fatigue life of steel wire rope［J］. Industry and Miner Automation, 2017, 43(3):43-47.(in Chinese)
［6］张敏, 寇子明, 李婷. 基于ABAQUS的钢丝绳扭矩分析［J］. 煤矿安全, 2016, 47(2):113-115.
ZHANG Min, KOU Zi-ming, LI Ting. Analysis of torque for steel wire rope based on ABAQUS［J］. Safety in Coal Mines, 2016, 47(2): 113-115.(in Chinese)
［7］马军, 葛世荣, 张德坤. 钢丝绳股内钢丝应力-应变分布的计算模型及数值模拟［J］. 机械工程学报, 2009, 45(11):277-282.
MA Jun, GE Shi-rong, ZHANG De-kun. Calculating model and numerical simulation of stress-strain distribution of wires within strands［J］. Journal of Mechanical Engineering, 2009, 45(11):277-282.(in Chinese)
［8］鲁信辉, 马平, 王志勇. 钢丝绳应力场与疲劳寿命研究［J］. 机械设计与制造, 2014(10):119-122.
LU Xin-hui, MA Ping, WANG Zhi-yong. The research of stress field and fatigue life of the 6×7+IWS steel wire ropes［J］. Machinery Design & Manufacture, 2014(10):119-122.(in Chinese)
［9］贾小凡, 张德坤. 承载钢丝绳在不同预张力下的弯曲疲劳损伤研究［J］. 机械工程学报, 2011, 47(24):31-37.
JIA Xiao-fan, ZHANG De-kun. Bending fatigue damage behavior of bearing wire rope on different pre-tension ［J］. Journal of Mechanical Engineering, 2011, 47(24):31-37.(in Chinese)
［10］ Wang D G, Zhang D K, Zhang Z F, et al. Effect of various kinematic parameters of mine hoist on fretting parameters of hoisting rope and a new fretting fatigue test apparatus of steel wires［J］. Engineering Failure Analysis, 2012, 22(2): 92-112.
［11］ Peterka P, KreAsˇG2ák J, Kropuch S, et al. Failure analysis of hoisting steel wire rope［J］. Engineering Failure Analysis, 2014, 45(1): 96-105.
［12］ Giglio M, Manes A. Life prediction of a wire rope subjected to axial and bending loads［J］. Engineering Failure Analysis, 2005, 12(4): 549-568.
［13］任志乾, 于宗乐, 陈循. 钢丝绳弹塑性损伤本构模型研究［J］. 机械工程学报, 2017, 53(1): 121-129.
REN Zhi-qian, YU Zong-yue, CHEN Xun. Study on wire rope elastic-plastic damage constitutive model［J］. Journal of Mechanical Engineering, 2017, 53(1): 121-129.(in Chinese)
［14］任志乾, 于宗乐, 陈循, 等. 基于弹塑性本构的单股钢丝绳受力分析［J］. 兵工学报, 2015, 36(9): 1782-1789.
REN Zhi-qian, YU Zong-yue, CHEN Xun, et al. Stress analysis of single strand wire rope based on elastic plastic constitutive model ［J］. Acta Armamentarii, 2015, 36(9): 1782-1789. (in Chinese)
［15］ Wang D G, Zhang D K, Wang S, et al. Finite element analysis of hoisting rope and fretting wear evolution and fatigue life estimation of steel wires［J］. Engineering Failure Analysis, 2013, 27(1): 173-193.
［16］沈燕, 张德坤, 王大刚. 接触载荷对钢丝微动磨损行为影响的研究［J］.摩擦学学报, 2010, 30(4):404-408.
SHEN Yan, ZHANG De-kun, WANG Da-gang. Effect of contact load on the fretting wear behavior of steel wire［J］. Tribology, 2010, 30(4):404-408.(in Chinese)
［17］ Cruzado A, Leen S B, Urchegui M A. Finite element simulation of fretting wear and fatigue in thin steel wires［J］. International Journal of Fatigue, 2013, 55(5):7-21.
［18］孙土贵, 史天录. 钢丝绳数学模型及有限元分析［J］. 五邑大学学报:自然科学版, 2016, 30(1): 64-68.
SUN Tu-gui, SHI Tian-lu. Mathematical model and finite element analysis of wire ropes［J］. Journal of Wuyi University:Natural Science Edition, 2016, 30(1): 64-68.(in Chinese)
［19］张向冈, 陈宗平, 薛建阳, 等. 圆钢管再生混凝土柱抗震性能试验与有限元分析［J］. 应用基础与工程科学学报, 2016(3): 582-594.
ZHANG Xiang-gang, CHEN Zong-ping, XUE Jian-yang, et al. Test and finite element analysis of seismic performance for recycled aggregate concrete filled circular steel tube column［J］. Journal of Basic Science and Engineering, 2016(3): 582-594.(in Chinese)
［20］成大先. 机械设计手册［M］. 北京:化学工业出版社, 2004:7-9.
CHENG Da-xian. Mechanical design manual［M］. Beijing: Chemical Industry Press, 2004:7-9.(in Chinese)
［21］肖毅华, 董晃晃, 平学成. 基于 ABAQUS的SPH粒子生成及其在高速冲击计算中应用［J］. 振动与冲击, 2016, 35(17): 140-145.
XIAO Yi-hua, DONG Huang-huang, PING Xue-cheng. A SPH particle generation method based on ABAQUS and its application in high velocity impact calculation［J］. Journal of Vibration and Shock, 2016, 35(17): 140-145.(in Chinese)
［22］聂建国, 王宇航. ABAQUS 中混凝土本构模型用于模拟结构静力行为的比较研究［J］. 工程力学, 2013(4): 59-67.
NIE Jian-guo, WANG Yu-hang. Comparison study of constitutive model of concrete in ABAQUS for static analysis of structures［J］. Engineering Mechanics, 2013(4): 59-67.(in Chinese)
［23］吴娟, 寇子明, 刘玉辉, 等. 弯曲钢丝绳股内钢丝应力应变数值模拟［J］. 煤炭学报, 2015, 40(6): 1463-1468.
WU Juan, KOU Zi-ming, LIU Yu-hui, et al. Numerical simulation of stress-strain of bended wire rope［J］. Journal of China Coal Society, 2015, 40(6): 1463-1468.(in Chinese)

第39卷
第4期2018 年4月兵工学报ACTA
ARMAMENTARIIVol.39No.4Apr.2018

[1]	WUBULIAISAN Maimaitituersun, WU Yanqing, HOU Xiao, YIN Xinmei, ZHANG Xin. On the Determination of Viscoelastic Model Parameters and Microstructural Damage Evolution of Solid Propellants [J]. Acta Armamentarii, 2024, 45(4): 1038-1046.
[2]	ZHANG Zhonghao, WANG Wei, ZHANG Guokai, WANG Zhen, WU Gu. Study on Deterioration and Damage Performance of Concrete at Different High Temperatures [J]. Acta Armamentarii, 2023, 44(S1): 152-159.
[3]	MIAO Feichao, ZHANG Xiangrong, LI Dongwei, JIANG Tao, ZHOU Lin. A Pulse Shaper Model for Hopkinson Pressure Bars [J]. Acta Armamentarii, 2023, 44(7): 1978-1984.
[4]	ZHI Ruoyang, LUO Kai, WANG Hanwei, QIN Kan. Effects of Injection Mass Flow Rate and Position on the Performance of Partial Admission Axial Impulse Turbines with Jet Impingement Cooling [J]. Acta Armamentarii, 2023, 44(7): 2053-2065.
[5]	DU Kai, JIAO Li, YAN Pei, YU Jianhang, WANG Yubin, QIU Tianyang, WANG Xibin. Study of the Hard Turning Processability of Hardened Ultra-high Strength Steel 45CrNiMoVA [J]. Acta Armamentarii, 2023, 44(3): 773-782.
[6]	WANG Yong, WANG Xibin, WANG Zhibin, LIU Zhibing, LIU Shuyao, CHEN Hongtao, WANG Pai. Fatigue Life Prediction Model with Back Stress Energy Method Based on the Machined Surface Layer of High Strength Steel [J]. Acta Armamentarii, 2023, 44(3): 806-815.
[7]	ZHANG Yifan, LIU Liangtao, WANG Jinxiang, LI Heng, TANG Kui. Damage Characteristics of Underwater Explosion Shock Wave and Bubble Load on Typical Cylindrical Shell Structure [J]. Acta Armamentarii, 2023, 44(2): 345-359.
[8]	HAN Jiatong, WANG Xin, ZHANG Lei, LI Zhen, WANG Pengfei, ZHAO Zhenyu, LU Tianjian. Dynamic Response and Failure Mechanism of Pre-holed Q235 Steel Plate under Foam Projectile Impact Loading [J]. Acta Armamentarii, 2023, 44(12): 3654-3666.
[9]	WANG Lei， LI Yi， MA Zhihui. The Radial Stiffness Calculation and Parameter Optimization of the Annular Rubber Shock Absorber Based on Mooney-RivlinModel [J]. Acta Armamentarii, 2022, 43(S1): 35-45.
[10]	FAN Xin, HUANG Xingyuan, CHANG Lijun, WANG Tianhao, ZHAO Yongfei, CAI Zhihua. Dynamic Head-Neck Response to Bullet Impact and Effects of Passive Muscles on the Neck [J]. Acta Armamentarii, 2022, 43(9): 2200-2209.
[11]	LIU Yiming, XIONG Ziming, CHEN Xi, ZHONG Sidong, WANG Derong. Simulation and Experimental Study of the Traction and Deployment of an Interceptive Space Net wih Anti-UAV [J]. Acta Armamentarii, 2022, 43(9): 2048-2057.
[12]	YU Zheng, WANG Shu, DONG Fangdong, ZHENG Zhijun, CUI Shitang, ZHANG Yongliang. Gradient Design of Segmented Rod Projectile [J]. Acta Armamentarii, 2022, 43(9): 2300-2306.
[13]	ZHANG Zhendong， GAO Yuan， MA Dawei， ZHU Zhongling， WANG Xi. Simulation of the Dynamic Response of Cement Concrete Pavement under Multiple Cold Launch Loads [J]. Acta Armamentarii, 2022, 43(7): 1706-1717.
[14]	PAN Xiao， JIANG Yi， WANG Boman， REN Yebo. Dynamics Characteristics and Influencing Factors of Multistage Canister Gas Ejection of Rockets [J]. Acta Armamentarii, 2022, 43(6): 1277-1287.
[15]	LI Xu, LIU Yan, AN Fengjiang, WANG Hongfu, XU Yingliang. Flow Field Distribution and Morphology Variation of Particles in Planetary Ball Milling [J]. Acta Armamentarii, 2022, 43(4): 876-891.