Configuration and Optimization Method of Carrying Spares of Mission-oriented Combat Unit

doi:10.3969/j.issn.1000-1093.2017.06.018

Abstract

Abstract: Spare parts are important guaranty and basic material for a combat unit to ensure that the failure equipment can be put into combat and resumed to fight immediately. A calculation method for spares demand rate of redundant system based on equivalent life transformation is proposed. According to repairable spares inventory control theory, a carrying spares dynamic configuration model for multi-phase mission is established by taking with system mission success probability as objective function. Through the introduction of Lagrange constraint factors, a multi-constraint oriented spares optimization method is proposed. In a given example, the calculated result is analyzed, which meets all constraint conditions. The deviation between the calculated result and the ExtendSim simulation results is less than 3%. The correctness of the model is verified. Key

Key words: ordnancescienceandtechnology, mission-oriented, combatunit, carryingspares, dynamicoptimization, redundantsystem

CLC Number:

RUAN Min-zhi， FU Jian， ZHOU Liang， WANG Jun-long. Configuration and Optimization Method of Carrying Spares of Mission-oriented Combat Unit[J]. Acta Armamentarii, 2017, 38(6): 1178-1185.

References

［1］ Sherbrooke C C. Optimal inventory modeling of systems: multi-echelon techniques［M］. 2nd ed. Boston: Artech House, 2004.
［2］ Yoon K B, Sohn S Y. Finding the optimal CSP inventory level for multi-echelon system in air force using random effects regression model［J］. European Journal of Operational Research, 2007, 180(3): 1076-1085.
［3］ Sleptchenko A, van der Heijden M C, van Harten A. Effects of finite repair capacity in multi-echelon multi-indenture service part supply systems［J］. International Journal of Production Economics, 2002, 79(3): 209-230.
［4］解江，刘晓东，段斌，等．多隶属关系下的两级可修复航材储备模型研究［J］．系统工程理论与实践，2015，35(3)：811-816．
XIE Jiang, LIU Xiao-dong, DUAN Bin, et al. Research on the reserve model of two level recoverable spare parts under multi-indenture［J］. System Engineering Theory & Practice, 2015, 35(3): 811-816.(in Chinese)
［5］阮旻智，李庆民、黄傲林，等．有限维修渠道约束下的多级维修供应系统库存控制［J］．航空学报，2012，33(11)：2018-2027．
RUAN Min-zhi, LI Qing-min, HUANG Ao-lin, et al. Inventory control of multi-echelon maintenance supply system under finite repair channel constraint［J］. Acta Aeronautica et Astronautica Sinica, 2012, 33(11): 2018-2027.(in Chinese)
［6］ Ruan M Z, Luo Y, Li H. Configuration model of partial repairable spares under batch ordering policy based on inventory state［J］. Chinese Journal of Aeronautics, 2014, 27(3): 558-567.
［7］ Ahmad H, Matthieu H. Interval availability analysis of a two-echelon multi-item system［J］. European Journal of Operational Research, 2013, 228(3): 494-503.
［8］ Francesco C, Giulio D, Massimo T. Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints［J］. Reliability Engineering and System Safety, 2013, 119: 95-101.
［9］ Elisa A, Matthieu H. On two-echelon inventory systems with Poisson demand and lost sales［J］. European Journal of Operational Research, 2014, 235(1): 334-338.

［10］薛陶，冯蕴霞，秦强．考虑报废的K/N冷备份冗余系统可修复备件优化［J］．华南理工大学学报:自然科学版,2014，42(1)：41-45．
XUE Tao, FENG Yun-xia, QIN Qiang. Optimization of repairable spare parts for K/N cold-standby redundant system considering scraps［J］. Journal of South China University of Technology:Natural Science Edition, 2014, 42(1): 41-45.(in Chinese)
［11］刘任洋，李庆民，王慎，等．任意寿命分布单元表决系统备件需求量的解析算法［J］．系统工程与电子技术，2016，38(3)：714-718．
LIU Ren-yang, LI Qing-min, WANG Shen, et al. Analytical algorithm of spare demand for voting system of any life distribution units［J］. System Engineering and Electronics, 2016, 38(3): 714-718.(in Chinese)
［12］ Wu X Y, Wu X Y. Extended object-oriented Petri net model for mission reliability simulation of repairable PMS with common cause failures［J］. Reliability Engineering & System Safety, 2015, 136:109-119.
［13］卢雷，杨江平．k/N（G）结构系统初始备件配置方法［J］．航空学报，2014，35(3)：773-778．
LU Lei, YANG Jiang-ping. Initial spare allocation method for k/N(G) structure system［J］. Acta Aeronautica et Astronautica Sinica, 2014, 35(3): 773-778.(in Chinese)
［14］阮旻智，李庆民，张光宇，等．多约束下舰船装备携行备件保障方案的确定方法［J］．兵工学报，2013，34(9)：1144-1149．
RUAN Min-zhi, LI Qing-min, ZHANG Guang-yu, et al. Optimization method of carrying spare parts support project for warship equipment under multi-constraints［J］. Acta Armamentarii, 2013, 34(9): 1144-1149.(in Chinese)
［15］张永强，徐宗昌，孙寒冰，等．基于蒙特卡洛仿真和并行粒子群优化算法的携行备件优化［J］．兵工学报，2016，37(1)：122-130．
ZHANG Yong-qiang, XU Zong-chang, SUN Han-bing, et al. Optimization of carried spare parts based on monte carlo simulation and parallel particle swarm optimization algorithm［J］. Acta Armamentarii, 2016, 37(1): 122-130.(in Chinese)
［16］张志华．可靠性理论及工程应用［M］．北京：科学出版社，2012．
ZHANG Zhi-hua. Reliability theory and engineering application［M］. Beijing: Science Press, 2012.(in Chinese)
［17］ Nowicki D, Randall W S, Ramirez-Marquez J E. Improving the computational efficiency of metric-based spares algorithms［J］. European Journal of Operational Research, 2012, 219(2): 324-334.
［18］ van Horenbeek A, Scarf P A, Cavalcante C A V. The effect of maintenance quality on spare parts inventory for a fleet of assets［J］. IEEE Transactions on Reliability, 2013, 62(3): 596-607.

第38卷
第6期2017 年6月兵工学报ACTA
ARMAMENTARIIVol.38No.6Jun.2017

[1]	LI Shurui， DUAN Zhuoping， ZHENG Baohui， LUO Guan， HUANG Fenglei. Cylinder Test and Equation of State for DNAN-based Aluminized Melt-cast Explosive [J]. Acta Armamentarii, 2021, 42(7): 1424-1430.
[2]	DING Hongwei, LI Chao, LI Longjun, LIU Qianlin, BAO Liyong, YANG Zhijun. Design and Implementation of Adaptive Polling Access Control Protocol Based on FPGA Tactical Data Link [J]. Acta Armamentarii, 2019, 40(5): 1011-1019.
[3]	LOU Wei-peng, ZHENG Chang-song, LI He-yan, CHEN Jian-wen, ZHANG Zhou-li, MA Yuan. Research on Critical Open and Close Pressures of an Oil Discharge Valve for High Speed Wet Shifting Clutch [J]. Acta Armamentarii, 2017, 38(9): 1665-1672.
[4]	WANG Xian-cheng, YANG Shao-qing, MA Ning, ZHAO Wen-zhu. Research on Wear Model for Cylinder Liners in Vehicle Diesel Engines under Dynamic Load [J]. Acta Armamentarii, 2017, 38(9): 1673-1680.
[5]	SUN Hao-ze, CHANG Tian-qing, WANG Quan-dong, KONG De-peng, DAI Wen-jun. Image Detection Method for Tank and Armored Targets Based on Hierarchical Multi-scale Convolution Feature Extraction [J]. Acta Armamentarii, 2017, 38(9): 1681-1691.
[6]	ZHANG Yu-yan, SUN Sha-sha, WANG Zhen-chun, CAO Hai-yao, ZHAN Zai-ji. Simulation and Measurement of Surface Transient Temperature Field of High-speed Current-carrying Armature [J]. Acta Armamentarii, 2017, 38(9): 1692-1698.
[7]	LI Chen-ming， HUAN Chao， SHI Huai-long. Optimal Fire Distribution of a Rocket Launcher against Area Target [J]. Acta Armamentarii, 2017, 38(9): 1699-1704.
[8]	LEI Juan-mian, ZHANG Jia-wei, TAN Zhao-ming. Influence of Boattail on the Magnus Effect of Spinning Non-finned Projectile at Small Angles of Attack [J]. Acta Armamentarii, 2017, 38(9): 1705-1715.
[9]	LI Ze, YAN Xiao-peng, LI Ping, HAO Xin-hong, WANG Jian-tao. Jamming Mechanism of Frequency Sweep Jamming to FM Doppler Fuze [J]. Acta Armamentarii, 2017, 38(9): 1716-1722.
[10]	ZHANG Hao-wei, XIE Jun-wei, ZHANG Zhao-jian, ZONG Bin-feng, CHEN Tang-jun. Task Scheduling of Phased Array Radar Based on Hybrid Adaptive Genetic Algorithm [J]. Acta Armamentarii, 2017, 38(9): 1761-1770.
[11]	LI Mao， HOU Hai-liang， ZHU Xi， HUANG Xiao-ming， LI Dian， CHEN Chang-hai， HU Nian-ming. Influence of Structural Interspace on Anti-penetration Performance of Para-aramid Fiber-reinforced Composite Armor System [J]. Acta Armamentarii, 2017, 38(9): 1797-1805.
[12]	WANG Jian, HAN Yan, WANG Li-ming, ZHANG Pi-zhuang, CHEN Ping. Estimation Method for Instantaneous Frequency of Echo Signal of Projectile in Bore [J]. Acta Armamentarii, 2017, 38(9): 1806-1814.
[13]	LIU Hai-ou, ZHANG Wen-sheng, XU Yi, ZHAO Zi-ye. Load Spectrum Compiling for Transmission Shaft of Tracked Vehicle Based on Kernel Density Estimation [J]. Acta Armamentarii, 2017, 38(9): 1830-1838.
[14]	JIANG Miao-wen , YAN Jian-zhuo, CHEN Ji-min. 3D Printing of Military Helmet Liner Structure Based on Topology Optimization [J]. Acta Armamentarii, 2017, 38(9): 1845-1853.
[15]	ZHANG Lei, LI Shi-min, ZHU Gang. Study of Equipment Material Demand Prediction Method Based on Time-continuous Grey Markov Model [J]. Acta Armamentarii, 2017, 38(9): 1862-1866.