液压自由活塞发动机工作过程仿真模型研究

兵工学报 ›› 2011, Vol. 32 ›› Issue (9): 1059-1064.

液压自由活塞发动机工作过程仿真模型研究

吴维, 苑士华, 荆崇波, 郭凯

（北京理工大学车辆传动国家重点实验室，北京 100081）

收稿日期:2010-03-17 修回日期:2010-03-17 上线日期:2014-05-04
通讯作者: 吴维 E-mail:wuweijing@bit.edu.cn
作者简介:吴维(1983—)，男，讲师
基金资助:
“十一五”国家部委基础科研项目（A2220060053）

Research on Working Process Simulation Model of Hydraulic Free-piston Engine

WU Wei, YUAN Shi-hua, JING Chong-bo, GUO Kai

(National Key Laboratory of Vehicular Transmission, Beijing Institute of Technology, Beijing 100081, China)

Received:2010-03-17 Revised:2010-03-17 Online:2014-05-04
Contact: WU Wei E-mail:wuweijing@bit.edu.cn

摘要/Abstract

摘要： 为建立单活塞液压自由活塞发动机工作过程仿真模型，根据单活塞液压自由活塞发动机的系统特征，基于热力学、液压流体力学和动力学基本理论，给出了单活塞液压自由活塞发动机稳态工况工作过程的数学描述，并对结果进行了试验验证。结果表明：给出的考虑了液压系统构件动态特性影响的单活塞液压自由活塞发动机仿真模型，在活塞动力学特征、气缸气体压力特征和液压腔压力特征上具有较高的仿真精度。模型适合于单活塞液压自由活塞发动机系统参数确定、优化以及系统工作特征的模拟。

关键词: 流体传动与控制, 自由活塞发动机, 动态模型, 试验研究, 液压系统

Abstract: To establish working process simulation model of a single piston hydraulic free-piston engine, its basic feature is presented. Based on the theories of thermodynamics, hydromechanics and dynamics, its mathematical representations for the steady state working process are investigated. The simulation results are verified experimentally. The results show that the mathematical model considered the mechanical components dynamics of the hydraulic system achieves high precision. The simulated piston dynamics, cylinder gas pressure and hydraulic pressures are reliable. The model is propitious for the parameter design and optimization of the engine.

Key words: turn and control of fluid, free-piston engine, dynamic model, experiment, hydraulic equipment

中图分类号:

TH137

吴维, 苑士华, 荆崇波, 郭凯. 液压自由活塞发动机工作过程仿真模型研究[J]. 兵工学报, 2011, 32(9): 1059-1064.

WU Wei, YUAN Shi-hua, JING Chong-bo, GUO Kai. Research on Working Process Simulation Model of Hydraulic Free-piston Engine[J]. Acta Armamentarii, 2011, 32(9): 1059-1064.

参考文献

［1］杨华勇, 夏必忠, 傅新. 液压自由活塞发动机的发展历程及研究现状[J]. 机械工程学报, 2001, 37(2): 1-7.
YANG Hua-yong, XIA Bi-zhong, FU Xin. Hydraulic free-piston engine evolution process and recent studies[J]. Chinese Journal of Mechanical Engineering, 2001, 37(2):1-7. (in Chinese)
［2］ Achten P A J, Oever J P J, Potma J, et al. Horsepower with brains: the design of the CHIRON free piston engine[C]∥International Off-Highway & Powerplant Congress & Exposition, US: SAE, 2000.
［3］ Wu W, Yuan S H. Hu J B, et al. Design approach for single piston hydraulic free piston diesel engines[J]. Frontiers of Mechanical Engineering in China, 2009, 4(4): 371-377.
［4］周盛, 徐兵, 杨华勇, 等. 双活塞式液压自由活塞发动机仿真研究[J]. 机械工程学报, 2005, 41(4): 92-96.
ZHOU Sheng, XU Bing, YANG Hua-yong, et al. Simulation on dual hydraulic free piston engine[J]. Chinese Journal of Mechanical Engineering, 2005, 41(4): 92-96. (in Chinese)
［5］苑士华, 吴维, 胡纪滨, 等. 单活塞式液压自由活塞发动机运动特性研究[J]. 内燃机学报, 2009, 27(5): 474-479.
YUAN Shi-hua, WU Wei, HU Ji-bin, et al. Motion characteristics of a single piston hydraulic free piston engine[J]. Transactions of CSICE, 2009, 27(5):474-479. (in Chinese)
［6］荆崇波，吴维，苑士华. 液压自由活塞发动机AMESim/MATLAB仿真[J]. 系统仿真学报, 2009, 21(23): 7681-7685.
JING Chong-bo, WU Wei, YUAN Shi-hua. Simulation study of hydraulic free piston engine based on AMESim/MATLAB［J］. Journal of System Simulation, 2009, 21(23): 7681-7685. (in Chinese)
［7］ Chmela F, Orthaber G. Rate of heat release prediction for direct injection diesel engines based on purely mixing controlled combustion [C]∥International Congress and Exposition, US: SAE, 1999.
［8］王迟宇. 柴油机热平衡数值仿真与试验研究[D]. 杭州：浙江大学, 2007.
WANG Chi-yu. Numerical simulation and experimental study on the balance of head of a diesel engine [D]. Hangzhou: Zhejiang University, 2007. (in Chinese)
［9］ Mikalsen R, Roskilly A P. A review of free-piston engine history and applications[J]. Applied Thermal Engineering,2007,27(14-15): 2339-2352.

[1]	陈勇, 李胜, 阮健, 吴常盛, 张浩. 微型高压二维活塞泵的设计与容积效率[J]. 兵工学报, 2022, 43(2): 423-433.
[2]	王之千，毛保全，朱锐，杨雨迎，韩小平. 遥控武器站黏弹性胶体缓冲器试验研究[J]. 兵工学报, 2020, 41(2): 209-221.
[3]	岳嘉为，代波，吴旭，杨林. 轴向柱塞泵流量脉动对火箭炮俯仰调炮精度的影响分析[J]. 兵工学报, 2019, 40(9): 1781-1786.
[4]	李佳蔚，崔涛，刘宇航，师帅楠，孙强. 基于排气温度动态模型的在线观测器研究[J]. 兵工学报, 2019, 40(8): 1562-1571.
[5]	时素果, 王亚东, 杨晓光, 刘乐华. 超空泡航行体运动过程流体动力特性试验研究[J]. 兵工学报, 2019, 40(11): 2266-2271.
[6]	孙韬，张国伟，王一鸣，郭帅. 单兵火箭弹炸高优化的数值模拟与试验研究[J]. 兵工学报, 2018, 39(4): 681-687.
[7]	刘宇航，赵振峰，张付军，谢钊毅, 鲁怡，崔华盛. 对置活塞二冲程柴油机双喷油器碰撞喷雾试验研究[J]. 兵工学报, 2017, 38(10): 1881-1890.
[8]	时素果，王亚东，刘乐华，杨晓光. 预置舵角下超空泡航行体运动过程弹道特性研究[J]. 兵工学报, 2017, 38(10): 1974-1979.
[9]	延皓，康硕，王凤聚，李长春，黄静. 偏转板射流式伺服阀前置级液动力计算方法研究[J]. 兵工学报, 2016, 37(7): 1258-1265.
[10]	黄静，李长春，延皓，杨雪松，李竞. 基于改进经验模式分解算法的实时滤波新方法[J]. 兵工学报, 2016, 37(5): 929-935.
[11]	仇滔, 徐慧, 雷艳. 柴油机喷孔内空化过程及影响参数的试验研究[J]. 兵工学报, 2016, 37(11): 2114-2119.
[12]	魏胜利，卢泓坤，冷先银，梁昱，陈良，王飞虎. ZS1100M柴油机双ω型燃烧系统的试验研究[J]. 兵工学报, 2016, 37(1): 17-22.
[13]	魏超，周俊杰，苑士华. 液压油体积弹性模量稳态模型与动态模型的对比[J]. 兵工学报, 2015, 36(7): 1153-1159.
[14]	闫清东，穆洪斌，魏巍，刘树成. 双循环圆液力缓速器叶形参数优化设计[J]. 兵工学报, 2015, 36(3): 385-390.
[15]	芮筱亭，冯宾宾，王燕，黎超，陈涛. 发射装药发射安全性评定方法研究[J]. 兵工学报, 2015, 36(1): 1-11.