[1] Quan Y M, Zhou Z H, Ye B Y. Cutting process and chip appearance of aluminum matrix composites reinforced by SiC particle[J]. Journal of Materials Processing Technology, 1999, 91(1/2/3): 231-235. [2] Lin J T, Bhattacharyya D, Ferguson W G. Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites[J]. Composites Science and Technology, 1998, 58(2): 285-291. [3] El-Gallab M, Sklad M. Machining of Al/SiC particulate metal-matrix composites part I: tool performance[J]. Materials Processing Technology, 1998, 83(1/2/3): 151-158. [4] Cheung C F, Chan K C, Lee W B. Surface characterization in ultra-precision machining of Al/SiC metal matrix composites using data dependent systems analysis[J]. Materials Processing Technology, 2003,140(1/2/3): 141-146. [5] Yuan Z J, Geng L. Ultraprecision machining of SiCw/Al composites[J]. CIRP Annals-Manufacturing Technology, 1993, 42(1): 107-109. [6] Hung N P, Tan T C, Zhong Z W, et al. Ductile-regime machining of particle-reinforced metal matrix composites[J]. Machining Science and Technology, 1999, 3(2): 255-271. [7] Cheung C F, Chan K C, To S, et al. Effect of reinforcement in ultra-precision machining of Al6061/SiC metal matrix composites[J]. Scripta Materialia, 2002, 47(2): 77-82. [8] Chandrasekaran H, Johansson J O. Influence of processing conditions and reinforcement on the surface quality of finish machined aluminum alloy matrix composites[J]. CIRP Annals-Manufacturing Technology, 1997, 46(1): 493-496. [9] Ge Y F,Xu J H,Yang H, et al. Workpiece surface quality when ultra-precision turning SiCp/Al composites[J]. Journal of Materials Processing Technology, 2008, 203(1/2/3): 166-175. [10] Ge Y F, Xu J H, Yang H. Diamond tools wear and their applicability when ultra-precision turning of SiCp/2009Al matrix composite[J]. Wear, 2010, 269(11/12): 699-708. [11] Zenia S, Ayed L B, Nouari M, et al. Numerical prediction of the chip formation process and induced damage during the machining of carbon/epoxy composites[J]. International Journal of Mechanical Sciences, 2015, 90: 89-101. [12] Quan Y M, Zhou Z H, Ye B Y. Cutting process and chip appearance of aluminum matrix composites reinforced by SiC particle[J]. Journal of Materials Processing Technology, 1999, 91(1/2/3): 231-235. [13] Monaghan J M. The use of a quick-stop test to study the chip formation of a SiC/Al metal matrix composite material and its matrix alloy[J]. International Journal of Fatigue, 1996, 18(3): 213-218. [14] Arcona C, Dow T A. A new technique for studying the chip formation process in diamond turning[J]. Precision Engineering, 1996, 18(2/3): 157-160. [15] Komanduri R, Brown R H. On the mechanics of chip segmentation in machining[J]. Journal of Engineering for Industry, 1981, 103(1): 33-51. [16] 肖伯律, 左涛, 张维玉,等. 高能球磨制备15%SiC/2009Al复合材料的微观组织与断裂行为[J]. 稀有金属, 2005, 29(1): 1-5. XIAO Bo-lü, ZUO Tao, ZHANG Wei-yu, et al. Microstructure and fracture behavior of 15%SiC/2009Al composite by ball milling[J]. Chinese Journal of Rare Metals, 2005, 29(1): 1-5. (in Chinese) [17] 陈剑锋, 武高辉, 孙东立. 金属基复合材料的强化机制[J]. 航空材料学报, 2002, 22(2): 51-55. CHEN Jian-feng, WU Gao-hui, SUN Dong-li, et al. Strengthening mechanisms of metal matrix composites [J]. Journal of Aeronautical Materials, 2002, 22(2): 51-55. (in Chinese) [18] 秦蜀懿, 张国定. 改善颗粒增强金属基复合材料塑性和韧性的途径和机制[J]. 中国有色金属学报, 2000, 10(5): 621-630. QIN Shu-yi, ZHANG Guo-ding. Methods and mechanisms to improve ductility and toughness of particle reinforced metal matrix composites[J]. The Chinese Journal of Nonferrous Metals, 2000, 10(5): 621-630. (in Chinese) [19] Li X P, Seah W K H. Tool wear acceleration in relation to workpiece reinforcement percentage in cutting of metal matrix composites[J]. Wear, 2001, 247(2): 161-171. [20] Mondal D P, Ganesh N V, Munechwar V S, et al. Effect of SiC concentration and strain rate on the compressive deformation behaviour of 2014Al/SiCp composite[J]. Materials Science and Engineering, 2006, A 433(1/2): 18-31. [21] Stevenson R. The morphology of machining chips formed during low speed quasi-orthogonal machining of CA 360 brass and a model for their formation[J]. Journal of Engineering for Industry, 1992, 114(11): 405-411. [22] Klamecki B E. Catastrophe theory model of chip formation[J]. Journal of Engineering for Industry, 1982, 104(4): 369-373. [23] 全燕鸣, 周泽华. 不同颗粒度SiC增强铝基复合材料的切削加工性与适应刀具[J]. 材料科学与工程, 1996, 14(4): 59-64. QUAN Yan-ming, ZHOU Ze-hua. Machinability of aluminium matrix composites reinforced by different size SiC particles and their applicable tools[J]. Materials Science & Engineering, 1996, 14(4): 59-64. (in Chinese) [24] Komanduri R, Schroeder T A, Hazra J, et al. On the catastrophic shear instability in high-speed machining of an AISI 4340 steel[J]. Journal of Manufacturing Science and Engineering, 1982, 104(2): 121-131. [25] 樊建中, 姚忠凯,郭宏,等. 碳化硅增强铝基复合材料界面研究进展[J]. 稀有金属, 1997, 21(2): 134-138. FAN Jian-zhong, YAO Zhong-kai, GUO Hong, et al. The interface research status of SiC reinforced aluminum alloy composites[J]. Chinese Journal of Rare Metals,1997, 21(2): 134-138. (in Chinese) |