曲柄滑块机构运动可靠性的仿真

兵工学报 ›› 2006, Vol. 27 ›› Issue (1): 116-120.

曲柄滑块机构运动可靠性的仿真

纪玉杰^1,2，孙志礼¹，李良巧³

1．东北大学机械工程与自动化学院，辽宁沈阳110004；2．沈阳理工大学，辽宁沈阳11 0168 3．中国兵器工业系统总体部，北京100089

收稿日期:2005-03-03 上线日期:2014-12-25
通讯作者: 纪玉杰

Simulation on Motion Reliability of Crank-Slider Mechanism

JI Yu-jie^1,2, SUN Zhi-Ii¹, LI Liang-qiao³

I.College of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, Liaoning, China; 2.Shenyang bmversity of Science and Technology, Shenyang 110045, Liaoning, China; 3.System Engineering Institute, China North industries Group, Beijing 100089，China

Received:2005-03-03 Online:2014-12-25
Contact: JI Yu-jie

摘要/Abstract

摘要： 机构运动可靠性理论分析是一个非常复杂的过程。利用机械系统动力学分析软件——ADAMS作为机构运动可靠性分析平台，进行机构的变参数设计，从而建立机构运动可靠性的仿真模型进行仿真分析，并应用蒙特卡洛法进行计算。在整个求解过程中，不需根据机构的运动关系建立、求解复杂的解析数学方程，是机构运动可靠性分析计算的一种行之有效的方法。以曲柄滑块机构为例，研究考虑几何尺寸误差和运动副间隙误差对机构运动可靠性的综合影响。与传统方法相比较，使用该方法所得结果更加精确，而且适用于复杂机构，便于工程实际应用。

关键词: 机械学 , 机构 , 运动学 , 可靠性 , 仿真

Abstract: The theoretical analysis of mechanism motion reliability is a complicated problem to be solved. The model of typical mechanism motion reliability was established by using ADAMS as an analysis platform and designing the variable parameters of the mechanism. The solution could be com?puted with Monte Carlo method. The scheme had no need to deduce or solve the complex analytical e- quations. Take the crank-slider as an example with the consideration of geometry manufacture and joint clearance errors, which actually affect on the reliability of mechanism, the result is more accurate than that of the traditional methods. The presented scheme is more suitable for complex mechanism and can be liable to be employed m engineering application.

Key words: mechanics , mechanism , kinematics , reliability , simulation

中图分类号:

TH112

纪玉杰，孙志礼，李良巧. 曲柄滑块机构运动可靠性的仿真[J]. 兵工学报, 2006, 27(1): 116-120.

JI Yu-jie, SUN Zhi-Ii, LI Liang-qiao. Simulation on Motion Reliability of Crank-Slider Mechanism[J]. Acta Armamentarii, 2006, 27(1): 116-120.

参考文献

[1] 李良巧,顾唯明.机械可靠性设计与分析[M].北京：国防エ业出版社，1998:219.
LI Liang-qiao，GU Wei-ming. Design and Analysis on Mechanical Reliability[MJ. Beijing： National Defence Industry Press, 1998： 219. (in Chinese)
[2] 孙志礼，陈良玉?实用机械可靠性设计理论与方法[M].北京：科学出版社，2003:213.
SUN Zhi-li, CHEN Liang-yu. Applied Theory and Approach on Mechanical Reliability Design[M]. Beijing： China Science Press, 2003 ： 213. (in Chinese)
[3] Baumgerten L R A, et al. Probabilistic study relating to tolerance and path generation error[J]. Mech and Mach Theory, 1985，20
(I) : 71-76.
[4] 宋黎，杨坚.尺寸型对含间隙平面连杆机构误差传递系数的影响[J].湘潭大学自然科学学报，1999，21(3)：64 - 69.
SONG Li, YANG Jian. The effect of dimension type to the error transfer coefficients of planar linkage with pair clearance[J]. Nat?ural Science Journal of Xiangtan University，1999，21 (3) : 64 - 69. (in Chinese)
[5] 宋黎，曹惟庆，褚金奎.间隙曲柄滑块机构运动误差分析的模拟实验修正法[J].机械设计，1999, (4)：34-40.
SONG Li，CAO Wei-qing, CHU Jin-kui. The emulation experi?ment modification method on motion error analysis of crank-slider with joint clearance[ J]. Machinery Design, 1999，(4) : 34 - 40. (in Chinese)
[6] 李业农，施祖康.机构运动可靠度的研究[J].兵工学报，2003, [9] 24(1):93-96.
Li Ye-nong, SHI Zu-kang. A study on the motion reliability oi mechanisms[J]. Acta Armanentarii, 2003，24(I): 93 — 96. (in Chinese)
[7] 李志.曲柄滑块机构运动误差及运动可靠性分析[J].机械， 2001,28(2):17-18.
LI Zhi. Analysis to motion error and motion reliability on the crank-slider mechanism[ J ]. Machinery, 2001, 28 ( 2): 17 - 18.
(in Chinese)
[8] 陆凤仪，徐格宁，黄炜.平面连杆机构运动误差及可靠性分析 [11] [J].起重运输机械，2003，(4)：25 - 27.
LU Feng-yi，XU Ge-ning, HUANG Wei. Analysis to motion er?ror and reliability on the planar linkage mechanism[J].Crane &
Transportation Machinery, 2003, (4) ：25 - 27. (in Chinese)
[9] 陈建军,陈勇，高伟，等.平面四杆机构运动精度可靠性分析与数字仿真[J] ?西安电子科技大学学报，2001,28(6):759 - 763. CHEN Jian-jun，CHEN Yong, GAO Wei, et al. Reliability anal?ysis ana simulation for kinematics accuracy of the fiat four-oar mechanism[j] . Journal of Xidian University, 2001，28(6) :759 — 763. (in Chinese)
[10] Lee S J, et al. The determination of the probabilistic properties of velocities and accelerations in kinematics chain with uncertain?ty [J ]. AbME Journal of Mechanisms, Transmissions and Au?tomations in Design, 1991，(113) ： 84 — 90.
[11] 王超,王金,等.机械可靠性工程[M].北京:冶金エ业出版社， 1992:357.
WANG Chao, WANG Jin, et al. Mechanical Reliability Engi- neenng[M]. Beijing：China Metallurgy Industry Press, 1992： 357.(in Chinese)

[1]	杨占华，刘春生，李军，郭少鹏，李建阳. 空降车辆着陆缓冲过程动态建模仿真[J]. 兵工学报, 2022, 43(S1): 26-34.
[2]	魏武臣，徐硕，何晓夫，王晓光，岳通. 基于作战仿真推演的空-地制导弹药效能评估[J]. 兵工学报, 2022, 43(S1): 107-114.
[3]	王歌，张春，林智伟，王保华，檀虎，陈晨. 多束定向预制破片弹开舱距离研究[J]. 兵工学报, 2022, 43(S1): 115-120.
[4]	马优恒，姚林海，段红建，李维杰，赵磊. 防空反导光电组网探测概率仿真评估[J]. 兵工学报, 2022, 43(S1): 169-176.
[5]	刘勤，姬广振，曹璞琳，李娟，刘英. 基于故障物理的复杂机械系统可靠性设计分析技术[J]. 兵工学报, 2022, 43(S1): 189-195.
[6]	赵健，张亮，李岙然，冯宇，张宇，刘锐，李毅，李鑫勇，朱振雷. 基于系统工程方法的装甲装备可靠性指标分配[J]. 兵工学报, 2022, 43(S1): 196-202.
[7]	刘琳，龚晨，李朦朦，王然. 基于虚拟现实技术的可靠性、测试性、维修性、安全性、保障性设计[J]. 兵工学报, 2022, 43(S1): 208-213.
[8]	丁力，谷加辉，周金宇，康绍鹏，陈逸飞，李子依. 基于包络法的冗余机器人运动可靠性[J]. 兵工学报, 2022, 43(6): 1426-1434.
[9]	杨满芝，景钢，郭卫，张传伟，武宏璋，魏凯洋，李林岳，吕振阳，桂皓晨，张晓栋. 精密对称驱动二级微动放大系统设计及性能[J]. 兵工学报, 2022, 43(6): 1456-1465.
[10]	李景奎，林文杰，江秀红，卢雨泽. 基于GO-Markov的飞机燃油闭环控制系统可靠性分析[J]. 兵工学报, 2022, 43(6): 1447-1455.
[11]	陈恒帅，朱艳丽，李伟，白杰. 基于热传递仿真的热电池激活阶段热特性[J]. 兵工学报, 2022, 43(5): 1194-1200.
[12]	汪泰霖, 王野, 张富毅, 陈慧岩, 王国玉. 水陆两栖车矢量喷口装置设计与仿真[J]. 兵工学报, 2022, 43(4): 826-850.
[13]	张钢，梁伟阁，佘博，田福庆. 时频数据驱动的典型复杂供输机构健康状态软测量方法[J]. 兵工学报, 2022, 43(4): 737-747.
[14]	纪明，卜珺珺，马聪. 最大熵试验法对航天作动器输出可靠性的评估[J]. 兵工学报, 2022, 43(4): 919-923.
[15]	翁泽宇，刘胜利，吴晓郁，余行行，王武江，朱甫宏. 新型三维平移自由度Delta机构准零刚度隔振平台及特性[J]. 兵工学报, 2022, 43(3): 667-675.