金属与碳纤维复合结构发射箱耐高温冲击性能

doi:10.3969/j.issn.1000-1093.2021.11.009

摘要/Abstract

摘要： 为解决发射过程中产生的带颗粒高温燃气对碳纤维复合材料(CFRP)发射箱的冲刷和烧蚀问题，某型号发射箱采取薄壁金属与CFRP复合的结构形式，内层为金属层，外层为CFRP层。使用计算流体力学软件Fluent仿真不同材料、不同厚度金属层与CFRP层复合结构的温度分布；利用有限元分析软件Ansys进行线性温度屈曲分析，研究钢+CFRP复合、铝+CFRP复合两种复合结构以及不同厚度金属层复合的屈曲温度；提出热发射环境金属+CFRP复合结构参数，并与实际热发射试验结果进行对比分析。仿真和试验结果表明：金属+CFRP复合结构发射箱中，金属层厚度过薄，无法适应热发射过程的高温冲击，金属层会发生向内屈曲现象；相同厚度情况下，钢+CFRP复合结构耐热发射温度冲击能力高于铝+CFRP复合结构；相同质量情况下，钢+CFRP复合结构耐热发射温度冲击能力低于铝+CFRP复合结构。

关键词: 金属与碳纤维复合结构, 热发射, 碳纤维复合材料, 线性屈曲

Abstract: In order to solve the problem of scouring and ablation of the carbon fiber reinforced plastic (CFRP) launch container by the high temperature gas with particles generated during the launch process, a launch container is made of a thin-walled metal and CFRP composite structure, with the inner layer being the metal layer and the outer layer being the CFRP layer. The temperature distributions of the composite structures with different materials and different thicknesses of metal layer and CFRP layer were simulated using the CFD commercial software Fluent, and the linear buckling analysis of temperature was carried out using the finlte element analysis software. Finite element analysis software Ansys was used to study the buckling temperatures of steel-CFRP composite structure, aluminum-CFRP composite structure, and the composite structures with different thicknesses of metal layer. The parameters of metal-CFRP composite structure in the thermal emission environment were presented, and the actual thermal emission test results were compared and analyzed. The simulated and test results show that the thickness of metal layer is too thin to adapt to the high temperature shock in thermal launch process, and the metal layer is buckled inward; steel+CFRP composite structure has higher capacity than aluminum+CFRP composite structure for heat-emitting temperature impact under the condition of the same thickness; and steel+CFRP composite structure has lower capacity than aluminum+CFRP composite structure for heat-emitting temperature impact under the condition of the same mass.

Key words: metal+CFRPcompositestructure, thermallaunch, composites, linearbuckling

中图分类号:

TJ760.9

彭露玫，周成康，张志勇，刘冬. 金属与碳纤维复合结构发射箱耐高温冲击性能[J]. 兵工学报, 2021, 42(11): 2360-2367.

PENG Lumei， ZHOU Chengkang， ZHANG Zhiyong， LIU Dong. High-temperature Shock Resistance of Launch Container with Metal and Carbon Fiber Composite Structure[J]. Acta Armamentarii, 2021, 42(11): 2360-2367.

参考文献

［1］杨娇萍, 谭浩, 靖康, 等.不同类型材料对发射箱箱体成型工艺过程及刚强度的影响[J].航天制造技术, 2015(3):12-15.
YANG J P,TAN H,JING K,et al.Effects of different materials on process,stiffness and strength of launch container[J]. Aerospace Manufacturing Technology, 2015 ( 3):12-15.(in Chinese)
[2] 黎小平, 张小平, 王红伟. 碳纤维的发展及其应用现状[J]. 高科技纤维与应用, 2005, 30(5):24-30,40.
LI X P,ZHANG X P,WANG H W.Progress in development and application of carbon fiber[J].Hitech Fiber & Application,2005, 30(5):24-30,40.(in Chinese)
[3] 苏纯兰, 周长灵, 徐鸿照, 等.碳纤维增韧陶瓷基复合材料的研究进展[J].佛山陶瓷,2020,30(2):10-21.
SU C L,ZHOU C L,XU H Z,et al.Progress in carbon fiber reinforced ceramic matrix composites[J]. Foshan Ceramics, 2020,30(2): 10-21.(in Chinese)
[4] 姚汝亮, 朱慧, 张炜.改善硅橡胶绝热层性能的技术途径[C]∥中国宇航学会固体火箭推进第24届年会论文集.烟台：中国宇航协会,2007.
YAO R L,ZHU H,ZHANG W.Technical ways to improve the thermal insulation performance of silicone rubber[C]∥Proceedings of the 24th Annual Conference on Solid Rocket Propulsion ofChinese Society of Astronautics. Yantai: Chinese Society of Astronautics,2007.(in Chinese)
[5] 张毅, 付求舟, 蒋文革, 等.耐烧蚀橡胶在复合材料发射箱中的应用研究[C]∥第十四届全国复合材料学术会议论文集（下）.宜昌：中国宇航协会,2006:1345-1348.
ZHANG Y,FU Q Z,JIANG W G,et al.The process of thermal protecting of composites launching container by using rubber insulator[C]∥Proceedings of the 14th National Conference on Composites (Part Ⅱ).Yichang: Chinese Society of Astronautics,2006:1345- 1348.(in Chinese)
[6] 李佳怡, 李勇.硅橡胶/酚醛树脂绝热复合材料的制备与烧蚀性能的研究[C]∥ 2017全国高分子学术论文报告会论文集.成都：中国化学会,2007.
LI J Y,LI Y.Preparation and ablation properties of silicone rubber/phenolic resin insulation composites[C]∥Proceedings of the 2017 National Polymer Academic Paper Presentation Conference. Chengdu:Chinese Chemical Society, 2007.(in Chinese)
[7] 邱家浩，秦颖，张建英,等.耐高温涂料的研究现状[J].现代涂料与涂装， 2019,22(5):31-34.
QIU J H,QIN Y,ZHANG J Y,et al.Research status on high temperature resistant coatings[J]. Modern Paint & Finishing, 2019,22(5):31-34.(in Chinese)
[8] 田新鹏，李金强，郭章新，等.复合材料层合板在不同温度场中的热屈曲行为[J].太原理工大学学报， 2016,47(2):264-269.
TIAN X P,LI J Q,GUO Z X,et al.The thermal buckling behavior of composite laminated panels under uniform and non-uniform temperature fields[J]. Journal of Taiyuan University of Technology, 2016,47(2):264-269.(in Chinese)
[9] 苏建民, 刘炳昌, 李强. 双曲壳结构复合材料的热临界屈曲温度分析[J].科学技术与工程, 2020,20(19):7627-7632.
SU J M,LIU B C,LI Q.Analysis of thermal critical buckling temperature for doubly-curved shells structure composites[J].Science Technology and Engineering, 2020,20(19):7627-7632.(in Chinese)
[10] 邓科, 周成康, 姜毅, 等. 导弹热发射方式增推效能研究[J]. 兵工学报, 2016, 37(6):1038-1043.
DENG K，ZHOU C K，JIANG Y,et al.Research on efficiency of additional thrust of thermal launching[J].Acta Armamentarii,2016, 37(6):1038-1043.(in Chinese)
[11] 周成康, 李晨, 党海燕, 等.自排导热发射时燃气对导弹的载荷特性研究[J].战术导弹技术, 2014(2):34-37,42.
ZHOU C K，LI C,DANG H Y,et al.Research on the loads characteristic of flow gas against missile when the gas exhaust automatic[J]. Tactical Missile Technology, 2014(2):34-37,42.(in Chinese)
[12] 甘泉, 韩佳, 沈佳铭,等.基于ANSYS Workbench的细长压杆屈曲分析研究[J].石化技术, 2017(1):46-47,57.
GAN Q,HAN J,SHEN J M, et al.Buckling analysis on stender strut based on ANSYS Workbench[J].Petrochemical Industry Technology, 2017(1):46-47,57.(in Chinese)
[13] 高耀东, 周同.用有限元法模拟液压支架强度试验[J].机械设计, 2018(12):66-71.
GAO Y D,ZHOU T,Simulation of strength test of hydraulic support by means of finite element method.[J].Journal of Machine Design,2018(12):66-71.(in Chinese)

[1]	常青，张敏弟，马潇健，黄彪，黄国豪. 碳纤维复合材料各向异性特性对气泡形态影响试验研究[J]. 兵工学报, 2019, 40(11): 2272-2282.
[2]	邓科，周成康，于殿军，姜毅. 导弹热发射方式增推效能研究[J]. 兵工学报, 2016, 37(6): 1038-1043.
[3]	张辽远，尚明伟，赵炎，姜大林，马康乐. 金刚石线锯切割碳纤维复合材料实验研究[J]. 兵工学报, 2016, 37(11): 2044-2049.
[4]	苏飞，袁军堂，于斌斌，汪振华. 碳纤维增强复合材料的铣削实验和微观形貌分析[J]. 兵工学报, 2014, 35(4): 531-539.
[5]	胡晓磊，乐贵高，马大为，朱忠领. 同心筒发射燃气流二次燃烧数值研究及导流板结构改进[J]. 兵工学报, 2014, 35(1): 62-69.
[6]	高航，袁和平. 碳纤维复合材料构件干磨削砂轮研制及其加工性能研究[J]. 兵工学报, 2011, 32(2): 186-191.
[7]	刘东尧，余永刚. 电热发射内弹道集总参数模型[J]. 兵工学报, 2000, 21(2): 112-115.
[8]	1:庞思勤;2:刘伟成. 激光加工高性能复合枒料的エ艺与机理[J]. 兵工学报, 1992, 13(4): 84-91.