碳纤维复合材料各向异性特性对气泡形态影响试验研究

doi:10.3969/j.issn.1000-1093.2019.11.012

兵工学报 ›› 2019, Vol. 40 ›› Issue (11): 2272-2282.doi: 10.3969/j.issn.1000-1093.2019.11.012

碳纤维复合材料各向异性特性对气泡形态影响试验研究

常青，张敏弟，马潇健，黄彪，黄国豪

（北京理工大学机械与车辆学院，北京 100081）

收稿日期:2019-01-14 修回日期:2019-01-14 上线日期:2019-12-31
通讯作者: 张敏弟 (1971—)，女，副教授，硕士生导师，博士 E-mail:zmd1971@bit.edu.cn
作者简介:常青(1994—)，男，硕士研究生。E-mail: 18211065619@163.com
基金资助:
国家自然科学基金项目(41776192)

Experimental Research on the Effect of Anisotropic Properties of Composite Material on Bubble Shape

CHANG Qing, ZHANG Mindi, MA Xiaojian, HUANG Biao, HUANG Guohao

(School of Mechanical Engineering， Beijing Institute of Technology， Beijing 100081， China)

Received:2019-01-14 Revised:2019-01-14 Online:2019-12-31

摘要/Abstract

摘要： 为探究碳纤维复合材料各向异性特性对气泡溃灭形态的影响，利用高速全流场显示系统记录和观测单向纤维铺层的碳纤维复合材料边界附近气泡形态，以及复合材料边界变形随时间变化的过程，对气泡在不同铺层角度复合材料边界附近的形态变化进行分析。在气泡距复合材料边界相同初始距离下，针对铺层角度为0°、90°以及0°+90°交替叠加铺层的3种碳纤维复合材料板，对比了复合材料边界附近气泡的形态变化过程以及复合板变形的差异。研究结果表明：气泡在边界附近溃灭时产生高速射流以及冲击波是破坏边界的主要原因；铺层角度的不同会导致单向纤维复合材料边界的变形方式不同，从而严重影响气泡的形态演化过程以及溃灭方式。

关键词: 碳纤维复合材料, 气泡形态, 铺层角度, 各向异性

Abstract: In order to study the effect of anistropic properties of composite material on bubble shape, the shapes of bubbles near the carbon fiber composite material boundaries and the deformation of the carbon fiber composite material boundaries were recorded and observed by using high-speed camera. The shapes of bubbles near the composite material boundaries with different ply angles are studied. The changing processes of bubble shape and the deformation modes of the composite material boundaries at the same initial distance of bubble from the boundary are compared for the carbon fiber composite plates with the ply angles of 0°,90° and 0°+90°. The results show that the high-speed jet and shock wave generated by the collapse of bubble near the boundaries are the important factors for the damage of boundaries, and the different ply angles of carbon fiber composite material lead to different deformation modes, which has an important impact on the shapes of bubbles. Key

Key words: compositematerial, bubbleshape, plyangle, anisotropicproperty

中图分类号:

TJ630.1

常青，张敏弟，马潇健，黄彪，黄国豪. 碳纤维复合材料各向异性特性对气泡形态影响试验研究[J]. 兵工学报, 2019, 40(11): 2272-2282.

CHANG Qing, ZHANG Mindi, MA Xiaojian, HUANG Biao, HUANG Guohao. Experimental Research on the Effect of Anisotropic Properties of Composite Material on Bubble Shape[J]. Acta Armamentarii, 2019, 40(11): 2272-2282.

参考文献

［1］ HUANG B, ZHAO Y, WANG G Y. Large eddy simulation of turbulent vortex-cavitation interactions in transient sheet/cloud cavitating flows［J］. Computers & Fluids, 2014, 92:113-124.
［2］ MA X J, HUANG B, WANG G Y, et al. Numerical simulation of the red blood cell aggregation and deformation behaviors in ultrasonic field［J］. Ultrasonics Sonochemistry, 2017, 38: 604-613.
［3］ HUANG B, YOUNG Y L, WANG G Y, et al. Combined experimental and computational investigation of unsteady structure of sheet/cloud cavitation［J］. Fluids Eng, 2013, 135 (7): 071301.
［4］ HUANG B, WANG G Y, YUAN H T, et al. A cavitation model for cavitating flow simulations［J］. Journal of Hydrodynamics Hydrodyn Ser,B, 2010, 22(5): 798-804.
［5］ MA X J, HUANG B, WANG G Y, et al. Numerical investigation of the dynamic response of composite material subjected to bubble collapse［J］. WIT Transactions on Engineering Sciences, 2017, 115: 43-52.
［6］ MA X J, HUANG B, ZHAO X, et al. Comparisons of spark-charge bubble dynamics near the elastic and rigid boundaries［J］. Ultrasonics Sonochemistry, 2018, 43:80-90.
［7］ RAYLEIGH L. On the pressure developed in a liquid during the collapse of a spherical cavity［J］. Magister Philosophiae, 1919, 34: 94-98.
［8］ VOGEL A, LAUTERBORN W, TIMM R. Optical and acoustic investigations of the dynamics of laser-produced cavitation bubbles near a solid boundary［J］. Journal of Fluid Mechanics, 1989, 206: 299-338.
［9］ BENJAMIN T B, ELLIS A T. The collapse of cavitation bubbles and the pressures thereby produced against solid boundaries［J］. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1966,260(1110): 221-240.

［10］ LAUTERBORN W, BOLLE H. Experimental investigations of cavitation-bubble collapse in the neighbourhood of a solid boundary［J］. Journal of Fluid Mechanics, 1975, 72(2): 391-399.
［11］ BLAKE J R, GIBSON D C. Cavitation bubbles near boundaries［J］. Annual Review of Fluid Mechanics,1987, 19(1) 99-123.
［12］ SHIMA A, TOMITA Y, GIBSON D C, BLAKE J R. The growth and collapse of cavitation bubbles near composite surfaces［J］. Journal of Fluid Mechanics, 1989, 203:199-214.
［13］ TOMITA Y, SHIMA A. Mechanisms of impulsive pressure generation and damage pit formation by bubble collapse［J］. Journal of Fluid Mechanics, 1986, 169:535-564.
［14］ ZHANG S, WANG S P, ZHANG A M. Experimental study on the interaction between bubble and free surface using a high-voltage spark generator［J］. Physics of Fluids, 2016, 28(3): 032109.
［15］ TURANGAN C K, ONG G P, KLASEBOER E, KHOO B C. Experimental and numerical study of transient bubble-elastic membrane interaction［J］. Journal of Applied Physics, 2006, 100:054910-054917.
［16］ BRUJAN E A, NAHEN K, SCHMIDE P, et al. Dynamics of laser-induced cavitation bubbles near an elastic boundary［J］. Journal of Fluid Mechanics, 2001, 433: 251-281.
［17］张可达. 碳纤维复合材料［J］. 材料导报, 1993(1):59-62.
ZHANG K D. Carbon fiber composites［J］. Materials Report, 1993(1): 59-62. (in Chinese)
［18］张风翻. 树脂增韧及韧性复合材料［J］. 材料工程, 1995(5): 3-6.
ZHANG F F. Resin toughened and toughened composites ［J］. Material Engineering, 1995 (5): 3-6. (in Chinese)
［19］侯军生. 树脂基纤维增强复合材料的无上盖板成形［J］. 航空工艺技术, 1995(4): 24-26.
HOU J S. Forming of resin-based fiber reinforced composites without upper cover［J］. Aviation Technology,1995(4):24-26.(in Chinese)
［20］ ZHANG H Z, WU Q, LI Y P, et al. Numerical investigation of the deformation characteristics of a composite hydrofoil with different ply angles［J］. Ocean Engineering, 2018, 163:348-357.
［21］ SHIMA A, TOMITA Y, GIBSON D C, et al. The growth and collapse of cavitation bubbles near composite surfaces［J］. Journal of Fluid Mechanics , 1989, 203: 199-214.
［22］ TOMITA Y, KODAMA T. Interaction of laser-induced cavitation bubbles with composite surfaces［J］. Journal of Applied Physics, 2003, 94(5): 2809-2816.
［23］ YOUNG Y L, LIU Z, XIE W. Fluid-structure and shock-bubble interaction effects during underwater explosions near composite structures［J］. Journal of Applied Mechanics, 2009, 76(5):911-914.
［24］ GONG S W, KLASEBOER E. Interaction between collapsing bubble and viscoelastic solid: numerical modelling and simulation［J］. Applied Mathematical Modelling, 2016, 40(7/8): 4746-4764.
［25］ GONG S W, OHL S W, KLASEBOER E, et al. Interaction of a spark-generated bubble with a two-layered composite beam［J］. Journal of Fluids and Structures, 2018, 76: 336-348.
［26］张阿漫，王诗平，白兆宏，等. 不同环境下气泡脉动特性实验研究［J］．力学学报， 2011， 43(1): 71-83.
ZHANG A M，WANG S P，BAI Z H, et al. Experimental study on bubble pulse features underwater different circumstance［J］. Chinese Journal of Theoretical and Applied Mechanics，2011，43(1): 71-83．(in Chinese)

第40卷
第11期2019 年11月兵工学报ACTA
ARMAMENTARIIVol.40No.11Nov.2019

[1]	彭露玫，周成康，张志勇，刘冬. 金属与碳纤维复合结构发射箱耐高温冲击性能[J]. 兵工学报, 2021, 42(11): 2360-2367.
[2]	赵子涵，穆希辉，杜峰坡. 橡胶履带柔性复合材料的本构模型[J]. 兵工学报, 2020, 41(9): 1719-1726.
[3]	张辽远，尚明伟，赵炎，姜大林，马康乐. 金刚石线锯切割碳纤维复合材料实验研究[J]. 兵工学报, 2016, 37(11): 2044-2049.
[4]	苏飞，袁军堂，于斌斌，汪振华. 碳纤维增强复合材料的铣削实验和微观形貌分析[J]. 兵工学报, 2014, 35(4): 531-539.
[5]	高航，袁和平. 碳纤维复合材料构件干磨削砂轮研制及其加工性能研究[J]. 兵工学报, 2011, 32(2): 186-191.
[6]	李英雷**,胡时胜，魏志刚, 史洪刚,冯宏伟*. 大变形锻造钨合金动态力学性能研究[J]. 兵工学报, 2003, 24(3): 378-380.
[7]	1:庞思勤;2:刘伟成. 激光加工高性能复合枒料的エ艺与机理[J]. 兵工学报, 1992, 13(4): 84-91.

碳纤维复合材料各向异性特性对气泡形态影响试验研究

Experimental Research on the Effect of Anisotropic Properties of Composite Material on Bubble Shape

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 7

编辑推荐

Metrics

本文评价